------------[ cut here ]------------
[    0.001416] Interrupts were enabled early
[    0.001427] WARNING: CPU: 0 PID: 0 at init/main.c:1023 start_kernel+0x30c/0x384
[    0.001452] Modules linked in:
[    0.001465] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.15.0-rc6-next-20250512 #1 PREEMPT 
[    0.001475] Hardware name: WinLink E850-96 board (DT)
[    0.001481] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    0.001490] pc : start_kernel+0x30c/0x384
[    0.001500] lr : start_kernel+0x30c/0x384
[    0.001510] sp : ffff800082143e80
[    0.001514] x29: ffff800082143e90 x28: 0000000000000000 x27: 0000000000000000
[    0.001531] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
[    0.001545] x23: 0000000000000004 x22: 00000000f883c228 x21: 000000008a000000
[    0.001558] x20: ffff80008214a000 x19: ffff800082155cc0 x18: 0000000000000388
[    0.001572] x17: 0000000000000000 x16: 0000000000000008 x15: 0000000000000003
[    0.001583] x14: ffff80008217f2d8 x13: 0000000000000003 x12: 0000000000000003
[    0.001594] x11: 00000000ffffefff x10: 0000000000000000 x9 : 8d7029b3d58a2600
[    0.001606] x8 : 8d7029b3d58a2600 x7 : 2065726577207374 x6 : 7075727265746e49
[    0.001619] x5 : ffff8000826a11e6 x4 : ffff800081c2c755 x3 : 0000000000000000
[    0.001631] x2 : 0000000000000000 x1 : ffff800082143b70 x0 : 000000000000001d
[    0.001645] Call trace:
[    0.001650]  start_kernel+0x30c/0x384 (P)
[    0.001665]  __primary_switched+0x88/0x90
[    0.001682] ---[ end trace 0000000000000000 ]---

<LAVA_TEST_RUNNER EXIT>
shardfile-sigaltstack fail

rtc_rtctest_rtc_alarm_wkalm_set_minute fail

RUN           rtc.alarm_wkalm_set_minute ...
rtc_rtctest_rtc_alarm_alm_set_minute fail

alarm_alm_set_minute: Test terminated by assertion
FAIL  rtc.[   36.464272] <LAVA_SIGNAL_TESTCASE TEST_CASE_ID=rtc_rtctest_rtc_alarm_wkalm_set RESULT=fail>
rtc_rtctest_rtc_alarm_wkalm_set fail
rtc_rtctest_rtc_alarm_wkalm_set_minute fail

RUN           rtc.alarm_wkalm_set ...
rtctest.c:312:alarm_wkalm_set:Expected -1 (-1) != rc (-1)
alarm_wkalm_set: Test terminated by assertion
FAIL  rtc.alarm_wkalm_set
rtc_rtctest_rtc_alarm_alm_set fail
rtc_rtctest_rtc_alarm_alm_set_minute fail

RUN           rtc.uie_read ...
rtctest.c:166:uie_read:skip update IRQs not supported.
OK  rtc.uie_read
<LAVA_[   36.383918] <LAVA_SIGNAL_TESTCASE TEST_CASE_ID=rtc_rtctest_rtc_date_read_loop RESULT=fail>
rtc_rtctest_rtc_date_read_loop fail

RUN           rtc.date_read_loop ...
rtctest.c:125:date_read_loop:Continuously reading RTC time for 30s (with 11ms breaks after every read).
rtctest.c:128:date_read_loop:Expected -1 (-1) != rc (-1)
date_read_loop: Test terminated by assertion
FAIL  rtc.date[   36.364444] <LAVA_SIGNAL_TESTCASE TEST_CASE_ID=rtc_rtctest_rtc_date_read RESULT=fail>
_read_loop
rtc_rtctest_rtc_date_read fail
rtc_rtctest_rtc_date_read_loop fail

rseq_syscall_errors_test fail

[   28.611917] <LAVA_SIGNAL_TESTCASE TEST_CASE_ID=rseq_syscall_errors_test RESULT=fail>
rseq_param_test_mm_cid_compare_twice fail

rseq_param_test_mm_cid fail
rseq_param_test_mm_cid_benchmark fail
rseq_param_test_mm_cid_compare_twice fail

param_test_benchmark: param_test.c:469: void rseq_percpu_unlock(struct percpu_lock *, int): Assertion `lock->c[cpu].v == 1' failed.
rseq_param_test_benchmark fail

[   28.486003] <LAVA_SIGNAL_TESTCASE TEST_CASE_ID=rseq_param_test RESULT=fail>
rseq_param_test fail
rseq_param_test_benchmark fail
rseq_param_test_compare_twice fail
rseq_param_test_mm_cid fail
rseq_param_test_mm_cid_benchmark fail
rseq_param_test_mm_cid_compare_twice fail

param_test: param_test.c:469: void rseq_percpu[   28.460092] <LAVA_SIGNAL_TESTCASE TEST_CASE_ID=rseq_basic_percpu_ops_mm_cid_test RESULT=fail>
rseq_basic_percpu_ops_mm_cid_test fail

basic_percpu_ops_mm_cid_test: basic_percpu_ops_test.c:107: void rseq_percpu_unlock(struct percpu_lock *, int): Assertion `lock->c[cpu].v == 1'[   28.440809] <LAVA_SIGNAL_TESTCASE TEST_CASE_ID=rseq_basic_percpu_ops_test RESULT=fail>
 failed.
Aborted
exit=134timeout set to 0
selftests: rseq: param_test
rseq_basic_percpu_ops_test fail

exit=134timeout set to 0
selftests: rseq: basic_percpu_ops_test
spinlock
Segmentation fault
rseq_basic_test fail

<LAVA_TEST_RUNNER EXIT>
shardfile-openat2 fail