------------[ cut here ]------------
[    0.014007] WARNING: CPU: 0 PID: 0 at init/main.c:1023 start_kernel+0x350/0x354
[    0.014007] Interrupts were enabled early
[    0.014007] Modules linked in:
[    0.014038] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.15.0-rc6-next-20250512 #1 NONE 
[    0.014038] Hardware name: Generic DRA74X (Flattened Device Tree)
[    0.014038] Call trace: 
[    0.014068]  unwind_backtrace from show_stack+0x10/0x14
[    0.014068]  show_stack from dump_stack_lvl+0x50/0x5c
[    0.014099]  dump_stack_lvl from __warn+0xd8/0x1e0
[    0.014099]  __warn from warn_slowpath_fmt+0x11c/0x168
[    0.014129]  warn_slowpath_fmt from start_kernel+0x350/0x354
[    0.014129]  start_kernel from 0x0
[    0.014160] ---[ end trace 0000000000000000 ]---

timers_set-timer-lat fail

[   67.475799] <LAVA_SIGNAL_ENDRUN 5_kselftest-size 8269221_1.1.4.21>
shardfile-size fail

+ set +x
shardfile-sigaltstack fail

FAIL  rtc.alarm_wkalm_set_minute
rtc_rtctest_rtc_alarm_wkalm_set_minute fail

RUN           rtc.alarm_wkalm_set_minute ...
rtc_rtctest_rtc_alarm_alm_set_minute fail

RUN           rtc.alarm_wkalm_set ...
rtctest.c:312:alarm_wkalm[   53.941711] <LAVA_SIGNAL_TESTCASE TEST_CASE_ID=rtc_rtctest_rtc_alarm_alm_set RESULT=fail>
_set:Expected -1 (-1) != rc (-1)
alarm_wkalm_set: Test terminated by assertion
FAIL  rtc.alarm_wkalm_set
rtc_rtctest_rtc_alarm_alm_set fail
rtc_rtctest_rtc_alarm_alm_set_minute fail

FAIL  r[   53.872131] <LAVA_SIGNAL_TESTCASE TEST_CASE_ID=rtc_rtctest_rtc_date_read_loop RESULT=fail>
rtc_rtctest_rtc_date_read_loop fail

RUN           rtc.date_read_loop ...
rtctest.c:125:date_read_[   53.850280] <LAVA_SIGNAL_TESTCASE TEST_CASE_ID=rtc_rtctest_rtc_date_read RESULT=fail>
loop:Continuously reading RTC time for 30s (with 11ms breaks after every read).
rtctest.c:128:date_read_loop:Expected -1 (-1) != rc (-1)
date_read_loop: Test terminated by assertion
rtc_rtctest_rtc_date_read fail
rtc_rtctest_rtc_date_read_loop fail

shardfile-rseq fail

[   39.831115] <LAVA_SIGNAL_TESTCASE TEST_CASE_ID=shardfile-openat2 RESULT=fail>
shardfile-openat2 fail

(no logs available)