Date
June 17, 2025, 6:35 a.m.
Failure - lava - login-action
(no logs available)
Failure - boot - gcc-13-lkftconfig
(no logs available)
Failure - lava - job
(no logs available)
Failure - lava - fastboot-boot
(no logs available)
Failure - lava - auto-login-action
(no logs available)
Failure - log-parser-boot - internal-error-oops-oops-smp
KNOWN ISSUE - LKFT: Dragonboard 845c: Internal error: Oops: ufs_qcom_setup_clocks
[ 6.634657] Internal error: Oops: 0000000096000006 [#1] SMP [ 6.645321] pci 0000:01:00.0: quirk_usb_early_handoff+0x0/0xa58 took 23376 usecs [ 6.646048] qcom-pcie 1c08000.pcie: PCI host bridge to bus 0001:00 [ 6.646063] pci_bus 0001:00: root bus resource [bus 00-ff] [ 6.646074] pci_bus 0001:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x0000-0xfffff]) [ 6.646090] pci_bus 0001:00: root bus resource [mem 0x40300000-0x5fffffff] [ 6.646627] pci 0001:00:00.0: [17cb:0107] type 01 class 0x060400 PCIe Root Port [ 6.646681] pci 0001:00:00.0: BAR 0 [mem 0x00000000-0x00000fff] [ 6.646696] pci 0001:00:00.0: PCI bridge to [bus 01-ff] [ 6.646717] pci 0001:00:00.0: bridge window [io 0x100000-0x100fff] [ 6.646730] pci 0001:00:00.0: bridge window [mem 0x00000000-0x000fffff] [ 6.646758] pci 0001:00:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref] [ 6.646921] pci 0001:00:00.0: PME# supported from D0 D3hot D3cold [ 6.647035] xhci-hcd xhci-hcd.0.auto: irq 157, io mem 0x0a800000 [ 6.647636] pci 0001:00:00.0: Adding to iommu group 17 [ 6.652253] pci 0001:00:00.0: BAR 0 [mem 0x40300000-0x40300fff]: assigned [ 6.652270] pci 0001:00:00.0: PCI bridge to [bus 01-ff] [ 6.652298] pci_bus 0001:00: resource 4 [io 0x100000-0x1fffff] [ 6.652307] pci_bus 0001:00: resource 5 [mem 0x40300000-0x5fffffff] [ 6.656393] pcieport 0001:00:00.0: PME: Signaling with IRQ 177 [ 6.657004] pcieport 0001:00:00.0: AER: enabled with IRQ 177 [ 6.659338] Modules linked in: qcom_vadc_common qcom_stats i2c_qcom_geni pwrseq_core drm_client_lib reset_qcom_pdc camcc_sdm845 videobuf2_common typec spi_geni_qcom [ 6.665044] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 6.670224] phy_qcom_qmp_usb gpi qcom_rng stm_core qcom_q6v5_mss slim_qcom_ngd_ctrl cfg80211 slimbus qrtr phy_qcom_qmp_ufs qcrypto lmh rfkill icc_osm_l3 [ 6.676740] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 6.684443] phy_qcom_qmp_pcie ufs_qcom(+) pdr_interface qcom_q6v5_pas(+) qcom_pil_info qcom_pdr_msg [ 6.690684] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed [ 6.696201] qcom_q6v5 qcom_wdt display_connector drm_kms_helper icc_bwmon qcom_sysmon llcc_qcom qcom_common qcom_glink_smem drm mdt_loader qmi_helpers backlight socinfo rmtfs_mem [ 6.696218] CPU: 7 UID: 0 PID: 357 Comm: (udev-worker) Not tainted 6.16.0-rc2-next-20250617 #1 PREEMPT [ 6.696222] Hardware name: Thundercomm Dragonboard 845c (DT) [ 6.696224] pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 6.703158] hub 1-0:1.0: USB hub found [ 6.709463] pc : ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom] [ 6.709473] lr : ufshcd_setup_clocks+0x68/0x4c8 [ 6.716856] hub 1-0:1.0: 1 port detected [ 6.722804] sp : ffff8000813cb640 [ 6.722805] x29: ffff8000813cb640 x28: 0000000000000001 x27: ffff000085875270 [ 6.722809] x26: ffff0000858752a0 [ 6.728272] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 6.734207] x25: ffff000085874870 x24: 0000000000000000 [ 6.734210] x23: ffff000085875280 x22: ffff0000858752a0 x21: 0000000000000000 [ 6.734213] x20: ffffcc018204f630 x19: ffff000085874870 [ 6.741310] hub 2-0:1.0: USB hub found [ 6.748763] x18: 0000000000000000 [ 6.748765] x17: 20646e6966206f74 x16: 20656c62616e5520 x15: 0000000000000100 [ 6.748768] x14: ffffffffffffffff x13: 0000000000000030 x12: 0101010101010101 [ 6.756592] hub 2-0:1.0: 1 port detected [ 6.762711] x11: ffff000080245118 x10: 0000000000000000 x9 : ffffcc01801cd9e0 [ 6.762715] x8 : ffff8000813cb4b8 x7 : fefefefefefefefe x6 : 0000000000000001 [ 7.207154] x5 : ffffffffffffffc8 x4 : 00000000c0000000 x3 : ffffcc014fab6058 [ 7.214346] x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff000085874870 [ 7.221539] Call trace: [ 7.224016] ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom] (P) [ 7.229720] ufshcd_setup_clocks+0x68/0x4c8 [ 7.233943] ufshcd_init+0x278/0xff8 [ 7.237557] ufshcd_pltfrm_init+0x558/0x878 [ 7.241781] ufs_qcom_probe+0x28/0x68 [ufs_qcom] [ 7.246435] platform_probe+0x70/0xd8 [ 7.250136] really_probe+0xc8/0x3a0 [ 7.253749] __driver_probe_device+0x84/0x170 [ 7.258143] driver_probe_device+0x44/0x120 [ 7.262365] __driver_attach+0xf8/0x208 [ 7.266235] bus_for_each_dev+0x90/0xf8 [ 7.270106] driver_attach+0x2c/0x40 [ 7.273718] bus_add_driver+0x118/0x248 [ 7.277586] driver_register+0x64/0x138 [ 7.281455] __platform_driver_register+0x2c/0x40 [ 7.286204] ufs_qcom_pltform_init+0x28/0xff8 [ufs_qcom] [ 7.291565] do_one_initcall+0x60/0x290 [ 7.295436] do_init_module+0x60/0x268 [ 7.299221] load_module+0x1f30/0x2050 [ 7.303005] init_module_from_file+0x90/0xe0 [ 7.307314] __arm64_sys_finit_module+0x270/0x370 [ 7.312063] invoke_syscall+0x50/0x120 [ 7.315847] el0_svc_common.constprop.0+0x48/0xf0 [ 7.320595] do_el0_svc+0x24/0x38 [ 7.323938] el0_svc+0x3c/0x130 [ 7.327112] el0t_64_sync_handler+0x10c/0x138 [ 7.331505] el0t_64_sync+0x198/0x1a0 [ 7.335205] Code: a90157f3 aa0003f3 f90013f6 f9405c15 (f94002b6) [ 7.341345] ---[ end trace 0000000000000000 ]---