[    6.766351] Internal error: Oops: 0000000096000006 [#1]  SMP
[    6.771167] qcom-pcie 1c00000.pcie: iATU: unroll F, 32 ob, 8 ib, align 4K, limit 4G
[    6.771424] qcom-pcie 1c00000.pcie: PCI host bridge to bus 0000:00
[    6.771441] pci_bus 0000:00: root bus resource [bus 00-ff]
[    6.771454] pci_bus 0000:00: root bus resource [io  0x100000-0x1fffff] (bus address [0x0000-0xfffff])
[    6.771462] pci_bus 0000:00: root bus resource [mem 0x60300000-0x60ffffff]
[    6.772067] pci 0000:00:00.0: [17cb:0106] type 01 class 0x060400 PCIe Root Port
[    6.772125] pci 0000:00:00.0: BAR 0 [mem 0x00000000-0x00000fff]
[    6.772141] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    6.772162] pci 0000:00:00.0:   bridge window [io  0x100000-0x100fff]
[    6.772175] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff]
[    6.772201] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[    6.772350] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[    6.773100] pci 0000:00:00.0: Adding to iommu group 17
[    6.778024] pci 0000:00:00.0: BAR 0 [mem 0x60300000-0x60300fff]: assigned
[    6.778042] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    6.778072] pci_bus 0000:00: resource 4 [io  0x100000-0x1fffff]
[    6.778081] pci_bus 0000:00: resource 5 [mem 0x60300000-0x60ffffff]
[    6.778731] xhci-hcd xhci-hcd.0.auto: irq 161, io mem 0x0a800000
[    6.781777] Modules linked in: i2c_qcom_geni videobuf2_v4l2 typec pwrseq_core drm_client_lib spi_geni_qcom camcc_sdm845
[    6.785288] pcieport 0000:00:00.0: PME: Signaling with IRQ 171
[    6.786284] pcieport 0000:00:00.0: AER: enabled with IRQ 171
[    6.788971] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    6.792264] pci 0000:01:00.0: [1912:0014] type 00 class 0x0c0330 PCIe Endpoint
[    6.792653] pci 0000:01:00.0: BAR 0 [mem 0x00000000-0x00001fff 64bit]
[    6.793256] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    6.794365] pci 0000:01:00.0: Adding to iommu group 17
[    6.794708] pcieport 0000:00:00.0: bridge window [mem 0x60400000-0x604fffff]: assigned
[    6.794723] pci 0000:01:00.0: BAR 0 [mem 0x60400000-0x60401fff 64bit]: assigned
[    6.794828] pci 0000:01:00.0: enabling device (0000 -> 0002)
[    6.796066]  gpi phy_qcom_qmp_usb videobuf2_common qcom_rng qcom_q6v5_mss stm_core ufs_qcom(+) phy_qcom_qmp_ufs qcrypto qrtr cfg80211 qcom_q6v5_pas(+) slim_qcom_ngd_ctrl(+) slimbus qcom_pil_info phy_qcom_qmp_pcie pdr_interface
[    6.803102] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[    6.811148]  rfkill icc_osm_l3 lmh qcom_pdr_msg icc_bwmon qcom_wdt qcom_q6v5
[    6.812829] pci 0000:01:00.0: quirk_usb_early_handoff+0x0/0xa58 took 17601 usecs
[    6.819224] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[    6.822385]  llcc_qcom qcom_sysmon qcom_common qcom_glink_smem mdt_loader display_connector
[    6.828052] hub 1-0:1.0: USB hub found
[    6.833360]  qmi_helpers drm_kms_helper drm rmtfs_mem backlight socinfo
[    6.833369] CPU: 5 UID: 0 PID: 377 Comm: (udev-worker) Not tainted 6.16.0-rc3-next-20250625 #1 PREEMPT 
[    6.833373] Hardware name: Thundercomm Dragonboard 845c (DT)
[    6.833375] pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.833378] pc : ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom]
[    6.838623] hub 1-0:1.0: 1 port detected
[    6.844602] lr : ufshcd_setup_clocks+0x68/0x4c8
[    6.844608] sp : ffff800081493640
[    6.844609] x29: ffff800081493640 x28: 0000000000000001 x27: ffff000086f3d270
[    6.844613] x26: ffff000086f3d2a0 x25: ffff000086f3c870 x24: 0000000000000000
[    6.844616] x23: ffff000086f3d280
[    6.847819] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    6.853406]  x22: ffff000086f3d2a0 x21: 0000000000000000
[    6.853409] x20: ffffcf1c91e6fa98 x19: ffff000086f3c870 x18: 0000000000000000
[    6.853412] x17: 20646e6966206f74 x16: 20656c62616e5520
[    6.859528] hub 2-0:1.0: USB hub found
[    6.864027]  x15: 0000000000000100
[    6.864029] x14: ffffffffffffffff x13: 0000000000000030 x12: 0101010101010101
[    6.864032] x11: ffff000085292c18 x10: 0000000000000000 x9 : ffffcf1c8ffdc858
[    6.864036] x8 : ffff8000814934b8 x7 : fefefefefefefefe
[    6.869421] hub 2-0:1.0: 1 port detected
[    6.875876]  x6 : 0000000000000001
[    6.875877] x5 : ffffffffffffffc8 x4 : 00000000c0000000 x3 : ffffcf1c524fb058
[    6.875881] x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff000086f3c870
[    7.314965] Call trace:
[    7.317441]  ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom] (P)
[    7.323149]  ufshcd_setup_clocks+0x68/0x4c8
[    7.327374]  ufshcd_init+0x278/0xff8
[    7.330989]  ufshcd_pltfrm_init+0x558/0x878
[    7.335216]  ufs_qcom_probe+0x28/0x68 [ufs_qcom]
[    7.339871]  platform_probe+0x70/0xd8
[    7.343574]  really_probe+0xc8/0x3a0
[    7.347188]  __driver_probe_device+0x84/0x170
[    7.351583]  driver_probe_device+0x44/0x120
[    7.355808]  __driver_attach+0xf8/0x208
[    7.359679]  bus_for_each_dev+0x90/0xf8
[    7.363550]  driver_attach+0x2c/0x40
[    7.367163]  bus_add_driver+0x118/0x248
[    7.371034]  driver_register+0x64/0x138
[    7.374905]  __platform_driver_register+0x2c/0x40
[    7.379655]  ufs_qcom_pltform_init+0x28/0xff8 [ufs_qcom]
[    7.385018]  do_one_initcall+0x60/0x290
[    7.388891]  do_init_module+0x60/0x268
[    7.392678]  load_module+0x1f30/0x2050
[    7.396463]  init_module_from_file+0x90/0xe0
[    7.400773]  __arm64_sys_finit_module+0x270/0x370
[    7.405513]  invoke_syscall+0x50/0x120
[    7.409298]  el0_svc_common.constprop.0+0x48/0xf0
[    7.414037]  do_el0_svc+0x24/0x38
[    7.417383]  el0_svc+0x3c/0x130
[    7.420559]  el0t_64_sync_handler+0x10c/0x138
[    7.424955]  el0t_64_sync+0x198/0x1a0
[    7.428656] Code: a90157f3 aa0003f3 f90013f6 f9405c15 (f94002b6) 
[    7.434801] ---[ end trace 0000000000000000 ]---

[    6.012586] Internal error: Oops: 0000000096000006 [#1]  SMP
[    6.012590] Modules linked in:
[    6.015062] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    6.015340] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[    6.015393] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    6.015400] cfg80211: failed to load regulatory.db
[    6.019523] xhci-hcd xhci-hcd.0.auto: irq 171, io mem 0x0a800000
[    6.024691]  soundcore qcom_stats videobuf2_memops drm_client_lib v4l2_mem2mem reset_qcom_pdc cfg80211 coresight_stm videobuf2_v4l2 bluetooth aux_bridge camcc_sdm845 pwrseq_core i2c_qcom_geni spi_geni_qcom videobuf2_common phy_qcom_qmp_usb
[    6.030729] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    6.036715]  typec qcom_rng gpi ufs_qcom(+) rfkill qcom_q6v5_mss stm_core phy_qcom_qmp_ufs icc_osm_l3 qcrypto lmh qrtr phy_qcom_qmp_pcie slim_qcom_ngd_ctrl qcom_wdt slimbus qcom_q6v5_pas
[    6.042622] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[    6.048301]  pdr_interface qcom_pil_info qcom_q6v5 qcom_pdr_msg qcom_sysmon llcc_qcom qcom_common icc_bwmon display_connector drm_kms_helper qcom_glink_smem mdt_loader qmi_helpers
[    6.053429] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[    6.056578]  drm backlight socinfo rmtfs_mem
[    6.056585] CPU: 5 UID: 0 PID: 374 Comm: (udev-worker) Not tainted 6.16.0-rc3-next-20250625 #1 PREEMPT 
[    6.056589] Hardware name: Thundercomm Dragonboard 845c (DT)
[    6.058141] qcom-pcie 1c00000.pcie: iATU: unroll F, 32 ob, 8 ib, align 4K, limit 4G
[    6.058300] qcom-pcie 1c00000.pcie: PCI host bridge to bus 0000:00
[    6.058308] pci_bus 0000:00: root bus resource [bus 00-ff]
[    6.058313] pci_bus 0000:00: root bus resource [io  0x100000-0x1fffff] (bus address [0x0000-0xfffff])
[    6.058317] pci_bus 0000:00: root bus resource [mem 0x60300000-0x60ffffff]
[    6.058548] pci 0000:00:00.0: [17cb:0106] type 01 class 0x060400 PCIe Root Port
[    6.058570] pci 0000:00:00.0: BAR 0 [mem 0x00000000-0x00000fff]
[    6.058576] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    6.058584] pci 0000:00:00.0:   bridge window [io  0x100000-0x100fff]
[    6.058589] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff]
[    6.058599] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[    6.058663] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[    6.058975] pci 0000:00:00.0: Adding to iommu group 17
[    6.061472] pci 0000:00:00.0: BAR 0 [mem 0x60300000-0x60300fff]: assigned
[    6.061480] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    6.061490] pci_bus 0000:00: resource 4 [io  0x100000-0x1fffff]
[    6.061494] pci_bus 0000:00: resource 5 [mem 0x60300000-0x60ffffff]
[    6.062744] pcieport 0000:00:00.0: PME: Signaling with IRQ 181
[    6.066763] hub 1-0:1.0: USB hub found
[    6.070873] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.070876] pc : ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom]
[    6.070885] lr : ufshcd_setup_clocks+0x68/0x4c8
[    6.070892] sp : ffff800080fc3640
[    6.070894] x29: ffff800080fc3640
[    6.078405] hub 1-0:1.0: 1 port detected
[    6.085361]  x28: 0000000000000001 x27: ffff00008036f270
[    6.085363] x26: ffff00008036f2a0 x25: ffff00008036e870 x24: 0000000000000000
[    6.085367] x23: ffff00008036f280 x22: ffff00008036f2a0 x21: 0000000000000000
[    6.085371] x20: ffffce55f2e6fa98 x19: ffff00008036e870 x18: 0000000000000000
[    6.093989] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    6.101499] 
[    6.101500] x17: 20646e6966206f74 x16: 20656c62616e5520 x15: 0000000000000100
[    6.101503] x14: ffffffffffffffff x13: 0000000000000030 x12: 0101010101010101
[    6.101507] x11: ffff00008177dd18 x10: 0000000000000000 x9 : ffffce55f0fdc858
[    6.101510] x8 : ffff800080fc34b8 x7 : fefefefefefefefe x6 : 0000000000000001
[    6.101513] x5 : ffffffffffffffc8 x4 : 00000000c0000000 x3 : ffffce557abaa058
[    6.101516] x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff00008036e870
[    6.101519] Call trace:
[    6.101521]  ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom] (P)
[    6.107889] hub 2-0:1.0: USB hub found
[    6.115898]  ufshcd_setup_clocks+0x68/0x4c8
[    6.115901]  ufshcd_init+0x278/0xff8
[    6.115904]  ufshcd_pltfrm_init+0x558/0x878
[    6.115909]  ufs_qcom_probe+0x28/0x68 [ufs_qcom]
[    6.115912]  platform_probe+0x70/0xd8
[    6.119082] hub 2-0:1.0: 1 port detected
[    6.124785]  really_probe+0xc8/0x3a0
[    6.124788]  __driver_probe_device+0x84/0x170
[    6.124791]  driver_probe_device+0x44/0x120
[    6.124793]  __driver_attach+0xf8/0x208
[    6.124796]  bus_for_each_dev+0x90/0xf8
[    6.124798]  driver_attach+0x2c/0x40
[    6.137991] remoteproc remoteproc3: 4080000.remoteproc is available
[    6.139034]  bus_add_driver+0x118/0x248
[    6.139036]  driver_register+0x64/0x138
[    6.734767]  __platform_driver_register+0x2c/0x40
[    6.739517]  ufs_qcom_pltform_init+0x28/0xff8 [ufs_qcom]
[    6.744879]  do_one_initcall+0x60/0x290
[    6.748752]  do_init_module+0x60/0x268
[    6.752537]  load_module+0x1f30/0x2050
[    6.756321]  init_module_from_file+0x90/0xe0
[    6.760630]  __arm64_sys_finit_module+0x270/0x370
[    6.765380]  invoke_syscall+0x50/0x120
[    6.769164]  el0_svc_common.constprop.0+0x48/0xf0
[    6.773914]  do_el0_svc+0x24/0x38
[    6.777258]  el0_svc+0x3c/0x130
[    6.780433]  el0t_64_sync_handler+0x10c/0x138
[    6.784828]  el0t_64_sync+0x198/0x1a0
[    6.788528] Code: a90157f3 aa0003f3 f90013f6 f9405c15 (f94002b6) 
[    6.794672] ---[ end trace 0000000000000000 ]---

[    6.710704] Internal error: Oops: 0000000096000006 [#1]  SMP
[    6.710708] Modules linked in: snd_timer(+) snd ath soundcore aux_bridge qcom_stats reset_qcom_pdc drm_client_lib bluetooth(+) venus_core(+) mac80211 typec v4l2_mem2mem pwrseq_core camcc_sdm845 qcom_q6v5_mss i2c_qcom_geni(+) spi_geni_qcom(+) videobuf2_v4l2 phy_qcom_qmp_usb coresight_stm videobuf2_common qcom_rng phy_qcom_qmp_ufs gpi ufs_qcom(+) slim_qcom_ngd_ctrl qcrypto stm_core slimbus cfg80211 pdr_interface rfkill lmh qcom_pdr_msg phy_qcom_qmp_pcie icc_osm_l3 qcom_wdt qrtr llcc_qcom icc_bwmon qcom_q6v5_pas qcom_pil_info qcom_q6v5 qcom_sysmon qcom_common display_connector qcom_glink_smem drm_kms_helper mdt_loader qmi_helpers drm socinfo backlight rmtfs_mem
[    6.710770] CPU: 5 UID: 0 PID: 389 Comm: (udev-worker) Not tainted 6.16.0-rc3-next-20250625 #1 PREEMPT 
[    6.710775] Hardware name: Thundercomm Dragonboard 845c (DT)
[    6.710777] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.710780] pc : ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom]
[    6.710789] lr : ufshcd_setup_clocks+0x68/0x4c8
[    6.710796] sp : ffff8000812ab640
[    6.710797] x29: ffff8000812ab640 x28: 0000000000000001 x27: ffff000086c67270
[    6.710801] x26: ffff000086c672a0 x25: ffff000086c66870 x24: 0000000000000000
[    6.710805] x23: ffff000086c67280 x22: ffff000086c672a0 x21: 0000000000000000
[    6.710809] x20: ffffbf396906fa98 x19: ffff000086c66870 x18: 0000000000000000
[    6.710813] x17: 3036633831626438 x16: 3432376336306666 x15: 0000000000000000
[    6.710816] x14: ffffffffffffffff x13: 0000000000000030 x12: 0101010101010101
[    6.710820] x11: ffff0000813c5a18 x10: 0000000000000000 x9 : ffffbf39671dc858
[    6.710823] x8 : ffff8000812ab4b8 x7 : fefefefefefefefe x6 : 0000000000000001
[    6.710827] x5 : ffffffffffffffc8 x4 : 00000000c0000000 x3 : ffffbf38fdcce058
[    6.710831] x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff000086c66870
[    6.710835] Call trace:
[    6.710837]  ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom] (P)
[    6.710842]  ufshcd_setup_clocks+0x68/0x4c8
[    6.710845]  ufshcd_init+0x278/0xff8
[    6.710849]  ufshcd_pltfrm_init+0x558/0x878
[    6.710853]  ufs_qcom_probe+0x28/0x68 [ufs_qcom]
[    6.710857]  platform_probe+0x70/0xd8
[    6.710863]  really_probe+0xc8/0x3a0
[    6.710865]  __driver_probe_device+0x84/0x170
[    6.710868]  driver_probe_device+0x44/0x120
[    6.710871]  __driver_attach+0xf8/0x208
[    6.710873]  bus_for_each_dev+0x90/0xf8
[    6.710875]  driver_attach+0x2c/0x40
[    6.710878]  bus_add_driver+0x118/0x248
[    6.710880]  driver_register+0x64/0x138
[    6.710883]  __platform_driver_register+0x2c/0x40
[    6.710886]  ufs_qcom_pltform_init+0x28/0xff8 [ufs_qcom]
[    6.710890]  do_one_initcall+0x60/0x290
[    6.710894]  do_init_module+0x60/0x268
[    6.710899]  load_module+0x1f30/0x2050
[    6.710901]  init_module_from_file+0x90/0xe0
[    6.710904]  __arm64_sys_finit_module+0x270/0x370
[    6.710907]  invoke_syscall+0x50/0x120
[    6.710910]  el0_svc_common.constprop.0+0x48/0xf0
[    6.710912]  do_el0_svc+0x24/0x38
[    6.710914]  el0_svc+0x3c/0x130
[    6.710919]  el0t_64_sync_handler+0x10c/0x138
[    6.710923]  el0t_64_sync+0x198/0x1a0
[    6.710927] Code: a90157f3 aa0003f3 f90013f6 f9405c15 (f94002b6) 
[    6.710930] ---[ end trace 0000000000000000 ]---

[    6.576611] Internal error: Oops: 0000000096000006 [#1]  SMP
[    6.582843] pci_bus 0000:00: root bus resource [mem 0x60300000-0x60ffffff]
[    6.587921] Modules linked in: i2c_qcom_geni typec pwrseq_core videobuf2_common phy_qcom_qmp_usb spi_geni_qcom gpi qcrypto qcom_rng qcom_q6v5_mss stm_core rfkill lmh ufs_qcom(+) phy_qcom_qmp_pcie slim_qcom_ngd_ctrl phy_qcom_qmp_ufs qrtr slimbus icc_osm_l3
[    6.593874] pci 0000:00:00.0: [17cb:0106] type 01 class 0x060400 PCIe Root Port
[    6.599785]  qcom_wdt pdr_interface qcom_pdr_msg display_connector icc_bwmon llcc_qcom drm_kms_helper qcom_q6v5_pas(+) qcom_pil_info qcom_q6v5 qcom_sysmon qcom_common drm qcom_glink_smem mdt_loader qmi_helpers backlight socinfo
[    6.611468] pci 0000:00:00.0: BAR 0 [mem 0x00000000-0x00000fff]
[    6.614245] qcom-pcie 1c08000.pcie: iATU: unroll F, 8 ob, 8 ib, align 4K, limit 1024G
[    6.616188]  rmtfs_mem
[    6.616193] CPU: 5 UID: 0 PID: 396 Comm: (udev-worker) Not tainted 6.16.0-rc3-next-20250625 #1 PREEMPT 
[    6.616197] Hardware name: Thundercomm Dragonboard 845c (DT)
[    6.621740] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    6.626127] pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.626129] pc : ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom]
[    6.632539] pci 0000:00:00.0:   bridge window [io  0x0000-0x0fff]
[    6.637450] lr : ufshcd_setup_clocks+0x68/0x4c8
[    6.642380] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff]
[    6.647288] sp : ffff80008126b640
[    6.647289] x29: ffff80008126b640 x28: 0000000000000001 x27: ffff00008d089270
[    6.647293] x26: ffff00008d0892a0
[    6.652224] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[    6.657563]  x25: ffff00008d088870 x24: 0000000000000000
[    6.657565] x23: ffff00008d089280 x22: ffff00008d0892a0 x21: 0000000000000000
[    6.663951] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[    6.676228] x20: ffffb3686a86fa98 x19: ffff00008d088870 x18: 0000000000000000
[    6.676232] x17: 20646e6966206f74 x16: 20656c62616e5520 x15: 0000000000000100
[    6.689075] pci 0000:00:00.0: Adding to iommu group 16
[    6.700923] 
[    6.700924] x14: fffffdffc215c480 x13: 0000000000000030 x12: 0101010101010101
[    6.700927] x11: ffff000085712018 x10: 0000000000000000 x9 : ffffb368689dc858
[    6.700930] x8 : ffff80008126b4b8 x7 : fefefefefefefefe x6 : 0000000000000001
[    6.715756] pci 0000:01:00.0: [1912:0014] type 00 class 0x0c0330 PCIe Endpoint
[    6.716698] x5 : ffffffffffffffc8 x4 : 00000000c0000000 x3 : ffffb3680dfc5058
[    6.716702] x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff00008d088870
[    6.716705] Call trace:
[    6.716707]  ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom] (P)
[    6.722753] pci 0000:01:00.0: BAR 0 [mem 0x00000000-0x00001fff 64bit]
[    6.729338]  ufshcd_setup_clocks+0x68/0x4c8
[    6.729341]  ufshcd_init+0x278/0xff8
[    6.729344]  ufshcd_pltfrm_init+0x558/0x878
[    6.752628] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    6.759435]  ufs_qcom_probe+0x28/0x68 [ufs_qcom]
[    6.759439]  platform_probe+0x70/0xd8
[    6.780384] pci 0000:01:00.0: Adding to iommu group 16
[    6.785687]  really_probe+0xc8/0x3a0
[    6.785690]  __driver_probe_device+0x84/0x170
[    6.785692]  driver_probe_device+0x44/0x120
[    6.785695]  __driver_attach+0xf8/0x208
[    6.800617] pci 0000:00:00.0: bridge window [mem 0x60300000-0x603fffff]: assigned
[    6.800831] qcom-pcie 1c08000.pcie: PCI host bridge to bus 0001:00
[    6.800840] pci_bus 0001:00: root bus resource [bus 00-ff]
[    6.800845] pci_bus 0001:00: root bus resource [io  0x100000-0x1fffff] (bus address [0x0000-0xfffff])
[    6.800848] pci_bus 0001:00: root bus resource [mem 0x40300000-0x5fffffff]
[    6.801045] pci 0001:00:00.0: [17cb:0107] type 01 class 0x060400 PCIe Root Port
[    6.801064] pci 0001:00:00.0: BAR 0 [mem 0x00000000-0x00000fff]
[    6.801071] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[    6.801079] pci 0001:00:00.0:   bridge window [io  0x100000-0x100fff]
[    6.801084] pci 0001:00:00.0:   bridge window [mem 0x00000000-0x000fffff]
[    6.801094] pci 0001:00:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[    6.801161] pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
[    6.801450] pci 0001:00:00.0: Adding to iommu group 17
[    6.803782] pci 0001:00:00.0: BAR 0 [mem 0x40300000-0x40300fff]: assigned
[    6.803791] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[    6.803800] pci_bus 0001:00: resource 4 [io  0x100000-0x1fffff]
[    6.803804] pci_bus 0001:00: resource 5 [mem 0x40300000-0x5fffffff]
[    6.805075] pcieport 0001:00:00.0: PME: Signaling with IRQ 168
[    6.805421]  bus_for_each_dev+0x90/0xf8
[    6.805424]  driver_attach+0x2c/0x40
[    6.805426]  bus_add_driver+0x118/0x248
[    6.805428]  driver_register+0x64/0x138
[    6.805875] pcieport 0001:00:00.0: AER: enabled with IRQ 168
[    6.811136] pci 0000:00:00.0: BAR 0 [mem 0x60400000-0x60400fff]: assigned
[    6.816392]  __platform_driver_register+0x2c/0x40
[    6.816395]  ufs_qcom_pltform_init+0x28/0xff8 [ufs_qcom]
[    6.816399]  do_one_initcall+0x60/0x290
[    6.823419] pci 0000:01:00.0: BAR 0 [mem 0x60300000-0x60301fff 64bit]: assigned
[    6.829110]  do_init_module+0x60/0x268
[    6.829115]  load_module+0x1f30/0x2050
[    6.835318] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    6.839820]  init_module_from_file+0x90/0xe0
[    6.839823]  __arm64_sys_finit_module+0x270/0x370
[    6.846670] pci 0000:00:00.0:   bridge window [mem 0x60300000-0x603fffff]
[    6.850002]  invoke_syscall+0x50/0x120
[    6.850005]  el0_svc_common.constprop.0+0x48/0xf0
[    6.857201] pci_bus 0000:00: resource 4 [io  0x0000-0xfffff]
[    6.860535]  do_el0_svc+0x24/0x38
[    6.860537]  el0_svc+0x3c/0x130
[    6.868346] pci_bus 0000:00: resource 5 [mem 0x60300000-0x60ffffff]
[    6.873694]  el0t_64_sync_handler+0x10c/0x138
[    6.873698]  el0t_64_sync+0x198/0x1a0
[    6.880896] pci_bus 0000:01: resource 1 [mem 0x60300000-0x603fffff]
[    6.887026] Code: a90157f3 aa0003f3 f90013f6 f9405c15 (f94002b6) 
[    6.887029] ---[ end trace 0000000000000000 ]---

[    6.479726] Internal error: Oops: 0000000096000006 [#1]  SMP
[    6.479733] Modules linked in: stm_core qcom_q6v5_mss qcrypto cfg80211(+) ufs_qcom(+) pdr_interface lmh phy_qcom_qmp_pcie icc_osm_l3 phy_qcom_qmp_ufs rfkill qcom_wdt qrtr qcom_pdr_msg qcom_q6v5_pas(+) qcom_pil_info qcom_q6v5 llcc_qcom qcom_sysmon icc_bwmon display_connector drm_kms_helper qcom_common qcom_glink_smem mdt_loader qmi_helpers drm backlight socinfo rmtfs_mem
[    6.479815] CPU: 5 UID: 0 PID: 361 Comm: (udev-worker) Not tainted 6.16.0-rc3-next-20250625 #1 PREEMPT 
[    6.479825] Hardware name: Thundercomm Dragonboard 845c (DT)
[    6.479830] pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.479837] pc : ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom]
[    6.479856] lr : ufshcd_setup_clocks+0x68/0x4c8
[    6.479868] sp : ffff800081433640
[    6.479871] x29: ffff800081433640 x28: 0000000000000001 x27: ffff00008da19270
[    6.479884] x26: ffff00008da192a0 x25: ffff00008da18870 x24: 0000000000000000
[    6.479895] x23: ffff00008da19280 x22: ffff00008da192a0 x21: 0000000000000000
[    6.479906] x20: ffffda8423c6fa98 x19: ffff00008da18870 x18: ffff8000807dbb08
[    6.479917] x17: 000000040044ffff x16: 005000f4b5503510 x15: 0000000000000000
[    6.479928] x14: ffff00008037e040 x13: ffff257cda121000 x12: ffffda842221936c
[    6.479939] x11: ffff00008569b418 x10: 0000000000000000 x9 : ffffda8421ddc858
[    6.479950] x8 : ffff8000814334b8 x7 : fefefefefefefefe x6 : 0000000000000001
[    6.479960] x5 : ffffffffffffffc8 x4 : 00000000c0000000 x3 : ffffda83c814e058
[    6.479971] x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff00008da18870
[    6.479982] Call trace:
[    6.479986]  ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom] (P)
[    6.480002]  ufshcd_setup_clocks+0x68/0x4c8
[    6.480009]  ufshcd_init+0x278/0xff8
[    6.480018]  ufshcd_pltfrm_init+0x558/0x878
[    6.480029]  ufs_qcom_probe+0x28/0x68 [ufs_qcom]
[    6.480041]  platform_probe+0x70/0xd8
[    6.480052]  really_probe+0xc8/0x3a0
[    6.480060]  __driver_probe_device+0x84/0x170
[    6.480068]  driver_probe_device+0x44/0x120
[    6.480075]  __driver_attach+0xf8/0x208
[    6.480083]  bus_for_each_dev+0x90/0xf8
[    6.480090]  driver_attach+0x2c/0x40
[    6.480095] cpu cpu0: EM: OPP:652800 is inefficient
[    6.480097]  bus_add_driver+0x118/0x248
[    6.480105] cpu cpu0: EM: OPP:576000 is inefficient
[    6.480104]  driver_register+0x64/0x138
[    6.480113] cpu cpu0: EM: OPP:480000 is inefficient
[    6.480112]  __platform_driver_register+0x2c/0x40
[    6.480120] cpu cpu0: EM: OPP:403200 is inefficient
[    6.480121]  ufs_qcom_pltform_init+0x28/0xff8 [ufs_qcom]
[    6.480127] cpu cpu0: EM: OPP:300000 is inefficient
[    6.480134]  do_one_initcall+0x60/0x290
[    6.480145]  do_init_module+0x60/0x268
[    6.480155]  load_module+0x1f30/0x2050
[    6.480163]  init_module_from_file+0x90/0xe0
[    6.480172]  __arm64_sys_finit_module+0x270/0x370
[    6.480181]  invoke_syscall+0x50/0x120
[    6.480188]  el0_svc_common.constprop.0+0x48/0xf0
[    6.480195]  do_el0_svc+0x24/0x38
[    6.480201]  el0_svc+0x3c/0x130
[    6.480213]  el0t_64_sync_handler+0x10c/0x138
[    6.480224]  el0t_64_sync+0x198/0x1a0
[    6.480234] Code: a90157f3 aa0003f3 f90013f6 f9405c15 (f94002b6) 
[    6.480240] ---[ end trace 0000000000000000 ]---

[    6.662220] Internal error: Oops: 0000000096000007 [#1]  SMP
[    6.662224] Modules linked in:
[    6.674400] pci 0000:00:00.0: bridge window [mem 0x60300000-0x603fffff]: assigned
[    6.674613] qcom-pcie 1c08000.pcie: PCI host bridge to bus 0001:00
[    6.674621] pci_bus 0001:00: root bus resource [bus 00-ff]
[    6.674627] pci_bus 0001:00: root bus resource [io  0x100000-0x1fffff] (bus address [0x0000-0xfffff])
[    6.674630] pci_bus 0001:00: root bus resource [mem 0x40300000-0x5fffffff]
[    6.674800] pci 0001:00:00.0: [17cb:0107] type 01 class 0x060400 PCIe Root Port
[    6.674819] pci 0001:00:00.0: BAR 0 [mem 0x00000000-0x00000fff]
[    6.674826] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[    6.674833] pci 0001:00:00.0:   bridge window [io  0x100000-0x100fff]
[    6.674838] pci 0001:00:00.0:   bridge window [mem 0x00000000-0x000fffff]
[    6.674848] pci 0001:00:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[    6.674910] pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
[    6.675158] pci 0001:00:00.0: Adding to iommu group 17
[    6.677364] pci 0001:00:00.0: BAR 0 [mem 0x40300000-0x40300fff]: assigned
[    6.677373] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[    6.677382] pci_bus 0001:00: resource 4 [io  0x100000-0x1fffff]
[    6.677385] pci_bus 0001:00: resource 5 [mem 0x40300000-0x5fffffff]
[    6.678601] pcieport 0001:00:00.0: PME: Signaling with IRQ 168
[    6.679730] pcieport 0001:00:00.0: AER: enabled with IRQ 168
[    6.680032]  camcc_sdm845 i2c_qcom_geni videobuf2_common typec phy_qcom_qmp_usb pwrseq_core spi_geni_qcom
[    6.683474] pci 0000:00:00.0: BAR 0 [mem 0x60400000-0x60400fff]: assigned
[    6.689957]  gpi qcom_rng stm_core phy_qcom_qmp_ufs qcom_q6v5_mss ufs_qcom(+)
[    6.693407] pci 0000:01:00.0: BAR 0 [mem 0x60300000-0x60301fff 64bit]: assigned
[    6.699530]  qcrypto qrtr cfg80211 slim_qcom_ngd_ctrl(+) phy_qcom_qmp_pcie
[    6.701119] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    6.706224]  slimbus rfkill pdr_interface qcom_wdt lmh qcom_pdr_msg
[    6.711940] pci 0000:00:00.0:   bridge window [mem 0x60300000-0x603fffff]
[    6.715012]  icc_osm_l3 qcom_q6v5_pas(+) icc_bwmon qcom_pil_info qcom_q6v5
[    6.722557] pci_bus 0000:00: resource 4 [io  0x0000-0xfffff]
[    6.728769]  llcc_qcom display_connector qcom_sysmon qcom_common drm_kms_helper
[    6.734300] pci_bus 0000:00: resource 5 [mem 0x60300000-0x60ffffff]
[    6.743577]  qcom_glink_smem mdt_loader qmi_helpers drm backlight
[    6.750510] pci_bus 0000:01: resource 1 [mem 0x60300000-0x603fffff]
[    6.757863]  socinfo rmtfs_mem
[    6.757869] CPU: 6 UID: 0 PID: 370 Comm: (udev-worker) Not tainted 6.16.0-rc3-next-20250625 #1 PREEMPT 
[    6.764952] pcieport 0000:00:00.0: PME: Signaling with IRQ 170
[    6.769087] Hardware name: Thundercomm Dragonboard 845c (DT)
[    6.769089] pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.769092] pc : ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom]
[    6.776663] pcieport 0000:00:00.0: AER: enabled with IRQ 170
[    6.782412] lr : ufshcd_setup_clocks+0x68/0x4c8
[    6.782421] sp : ffff8000819cf660
[    6.790404] pci 0000:01:00.0: enabling device (0000 -> 0002)
[    6.796359] x29: ffff8000819cf660 x28: 0000000000000001 x27: ffff000091201270
[    6.796362] x26: ffff0000912012a0 x25: ffff000091200870 x24: 0000000000000000
[    6.796366] x23: ffff000091201280
[    6.801622] pci 0000:01:00.0: quirk_usb_early_handoff+0x0/0xa40 took 10973 usecs
[    6.808384]  x22: ffff0000912012a0 x21: 0000000000000000
[    6.808387] x20: ffffbcca738a3a88 x19: ffff000091200870 x18: 0000000000000000
[    6.815948] remoteproc remoteproc0: adsp is available
[    6.819615] x17: 632079636e65646e x16: 6570656420646578 x15: 0000000000000000
[    6.819619] x14: ffffffffffffffff x13: 0000000000000030 x12: 0101010101010101
[    6.819622] x11: ffff000081f6a818 x10: 0000000000000000 x9 : ffffbcca717c25a8
[    6.819625] x8 : ffff8000819cf4d8 x7 : fefefefefefefefe x6 : 0000000000000001
[    6.819629] x5 : ffffffffffffffc8 x4 : 00000000c0000000 x3 : ffffbcca3f011058
[    6.826580] remoteproc remoteproc0: Direct firmware load for qcom/sdm845/adsp.mbn failed with error -2
[    6.831824] x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff000091200870
[    6.831828] Call trace:
[    6.831830]  ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom] (P)
[    6.831836]  ufshcd_setup_clocks+0x68/0x4c8
[    6.833722] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    6.833735] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[    6.833903] xhci-hcd xhci-hcd.0.auto: hcc params 0x0230fe65 hci version 0x110 quirks 0x0000808002000010
[    6.833943] xhci-hcd xhci-hcd.0.auto: irq 171, io mem 0x0a800000
[    6.834054] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    6.834059] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[    6.834065] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[    6.834427] hub 1-0:1.0: USB hub found
[    6.834447] hub 1-0:1.0: 1 port detected
[    6.834649] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    6.834898] hub 2-0:1.0: USB hub found
[    6.834914] hub 2-0:1.0: 1 port detected
[    7.168856]  ufshcd_init+0x278/0xff8
[    7.172473]  ufshcd_pltfrm_init+0x558/0x878
[    7.176699]  ufs_qcom_probe+0x28/0x68 [ufs_qcom]
[    7.181355]  platform_probe+0x70/0xd8
[    7.185058]  really_probe+0xc8/0x3a0
[    7.188672]  __driver_probe_device+0x84/0x170
[    7.193068]  driver_probe_device+0x44/0x120
[    7.197292]  __driver_attach+0xf8/0x208
[    7.201164]  bus_for_each_dev+0x90/0xf8
[    7.205035]  driver_attach+0x2c/0x40
[    7.208648]  bus_add_driver+0x118/0x248
[    7.212518]  driver_register+0x64/0x138
[    7.216389]  __platform_driver_register+0x2c/0x40
[    7.221139]  ufs_qcom_pltform_init+0x28/0xfff8 [ufs_qcom]
[    7.226588]  do_one_initcall+0x60/0x290
[    7.230461]  do_init_module+0x60/0x268
[    7.234247]  load_module+0x1fa4/0x2098
[    7.238033]  init_module_from_file+0x90/0xe0
[    7.242344]  __arm64_sys_finit_module+0x270/0x370
[    7.247084]  invoke_syscall.constprop.0+0x58/0xf8
[    7.251826]  do_el0_svc+0x48/0xd8
[    7.255173]  el0_svc+0x44/0x190
[    7.258350]  el0t_64_sync_handler+0x10c/0x138
[    7.262745]  el0t_64_sync+0x198/0x1a0
[    7.266447] Code: a90157f3 aa0003f3 f90013f6 f9405c15 (f94002b6) 
[    7.272592] ---[ end trace 0000000000000000 ]---

[    5.677220] Internal error: Oops: 0000000096000007 [#1]  SMP
[    5.677228] Modules linked in: typec(+) icc_osm_l3(+) qcom_wdt(+) cfg80211(+) stm_core qcom_q6v5_mss qcrypto
[    5.684813] qcom-pcie 1c00000.pcie: iATU: unroll F, 32 ob, 8 ib, align 4K, limit 4G
[    5.685381] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    5.693908]  phy_qcom_qmp_ufs rfkill ufs_qcom(+) lmh phy_qcom_qmp_pcie qrtr slim_qcom_ngd_ctrl slimbus pdr_interface qcom_pdr_msg
[    5.700957] cfg80211: failed to load regulatory.db
[    5.703762]  llcc_qcom icc_bwmon display_connector qcom_q6v5_pas qcom_pil_info qcom_q6v5 drm_kms_helper qcom_sysmon qcom_common qcom_glink_smem mdt_loader drm qmi_helpers backlight socinfo rmtfs_mem
[    5.860905] CPU: 4 UID: 0 PID: 364 Comm: (udev-worker) Not tainted 6.16.0-rc3-next-20250625 #1 PREEMPT 
[    5.870385] Hardware name: Thundercomm Dragonboard 845c (DT)
[    5.876103] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    5.883132] pc : ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom]
[    5.888865] lr : ufshcd_setup_clocks+0x68/0x4c8
[    5.893460] sp : ffff800084aaf660
[    5.896809] x29: ffff800084aaf660 x28: 0000000000000001 x27: ffff000080b05270
[    5.904019] x26: ffff000080b052a0 x25: ffff000080b04870 x24: 0000000000000000
[    5.911228] x23: ffff000080b05280 x22: ffff000080b052a0 x21: 0000000000000000
[    5.918436] x20: ffffd138f2ca3a88 x19: ffff000080b04870 x18: 0000000000000000
[    5.925645] x17: 20646e6966206f74 x16: 20656c62616e5520 x15: 0000000000000000
[    5.932853] x14: ffffffffffffffff x13: 0000000000000030 x12: 0101010101010101
[    5.940062] x11: ffff000081537518 x10: 0000000000000000 x9 : ffffd138f0bc25a8
[    5.947270] x8 : ffff800084aaf4d8 x7 : fefefefefefefefe x6 : 0000000000000001
[    5.954477] x5 : ffffffffffffffc8 x4 : 00000000c0000000 x3 : ffffd138e5d11058
[    5.961686] x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff000080b04870
[    5.968893] Call trace:
[    5.971376]  ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom] (P)
[    5.977106]  ufshcd_setup_clocks+0x68/0x4c8
[    5.981337]  ufshcd_init+0x278/0xff8
[    5.984960]  ufshcd_pltfrm_init+0x558/0x878
[    5.989191]  ufs_qcom_probe+0x28/0x68 [ufs_qcom]
[    5.993868]  platform_probe+0x70/0xd8
[    5.997582]  really_probe+0xc8/0x3a0
[    6.001204]  __driver_probe_device+0x84/0x170
[    6.005605]  driver_probe_device+0x44/0x120
[    6.009833]  __driver_attach+0xf8/0x208
[    6.013716]  bus_for_each_dev+0x90/0xf8
[    6.017597]  driver_attach+0x2c/0x40
[    6.021218]  bus_add_driver+0x118/0x248
[    6.025100]  driver_register+0x64/0x138
[    6.028983]  __platform_driver_register+0x2c/0x40
[    6.033741]  ufs_qcom_pltform_init+0x28/0xfff8 [ufs_qcom]
[    6.039196]  do_one_initcall+0x60/0x290
[    6.043080]  do_init_module+0x60/0x268
[    6.046877]  load_module+0x1fa4/0x2098
[    6.050673]  init_module_from_file+0x90/0xe0
[    6.054988]  __arm64_sys_finit_module+0x270/0x370
[    6.059748]  invoke_syscall.constprop.0+0x58/0xf8
[    6.064510]  do_el0_svc+0x48/0xd8
[    6.067865]  el0_svc+0x44/0x190
[    6.071046]  el0t_64_sync_handler+0x10c/0x138
[    6.075448]  el0t_64_sync+0x198/0x1a0
[    6.079159] Code: a90157f3 aa0003f3 f90013f6 f9405c15 (f94002b6) 
[    6.085312] ---[ end trace 0000000000000000 ]---

[    6.339203] Internal error: Oops: 0000000096000007 [#1]  SMP
[    6.339209] Modules linked in: phy_qcom_qmp_ufs rfkill ufs_qcom(+) qcrypto phy_qcom_qmp_pcie lmh qrtr slim_qcom_ngd_ctrl slimbus pdr_interface qcom_pdr_msg qcom_wdt icc_osm_l3 icc_bwmon llcc_qcom qcom_q6v5_pas qcom_pil_info qcom_q6v5 display_connector qcom_sysmon qcom_common drm_kms_helper qcom_glink_smem mdt_loader drm qmi_helpers backlight socinfo rmtfs_mem
[    6.339279] CPU: 0 UID: 0 PID: 379 Comm: (udev-worker) Not tainted 6.16.0-rc3-next-20250625 #1 PREEMPT 
[    6.339286] Hardware name: Thundercomm Dragonboard 845c (DT)
[    6.339289] pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.339295] pc : ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom]
[    6.339310] lr : ufshcd_setup_clocks+0x68/0x4c8
[    6.339324] sp : ffff8000818ef660
[    6.339326] x29: ffff8000818ef660 x28: 0000000000000001 x27: ffff000080b05270
[    6.339335] x26: ffff000080b052a0 x25: ffff000080b04870 x24: 0000000000000000
[    6.339344] x23: ffff000080b05280 x22: ffff000080b052a0 x21: 0000000000000000
[    6.339353] x20: ffffb2a980ea3a88 x19: ffff000080b04870 x18: 0000000000000000
[    6.339362] x17: ffffb2a980b070e0 x16: 0000000056822b97 x15: 0000000000000000
[    6.339371] x14: ffffffffffffffff x13: 0000000000000030 x12: 0101010101010101
[    6.339379] x11: ffff000080205418 x10: 0000000000000000 x9 : ffffb2a97edc25a8
[    6.339387] x8 : ffff8000818ef4d8 x7 : fefefefefefefefe x6 : 0000000000000001
[    6.339396] x5 : ffffffffffffffc8 x4 : 00000000c0000000 x3 : ffffb2a967b71058
[    6.339404] x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff000080b04870
[    6.339412] Call trace:
[    6.339415]  ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom] (P)
[    6.339427]  ufshcd_setup_clocks+0x68/0x4c8
[    6.339434]  ufshcd_init+0x278/0xff8
[    6.339441]  ufshcd_pltfrm_init+0x558/0x878
[    6.339449]  ufs_qcom_probe+0x28/0x68 [ufs_qcom]
[    6.339459]  platform_probe+0x70/0xd8
[    6.339469]  really_probe+0xc8/0x3a0
[    6.339475]  __driver_probe_device+0x84/0x170
[    6.339482]  driver_probe_device+0x44/0x120
[    6.339487]  __driver_attach+0xf8/0x208
[    6.339493]  bus_for_each_dev+0x90/0xf8
[    6.339498]  driver_attach+0x2c/0x40
[    6.339504]  bus_add_driver+0x118/0x248
[    6.339509]  driver_register+0x64/0x138
[    6.339515]  __platform_driver_register+0x2c/0x40
[    6.339521]  ufs_qcom_pltform_init+0x28/0xfff8 [ufs_qcom]
[    6.339531]  do_one_initcall+0x60/0x290
[    6.339540]  do_init_module+0x60/0x268
[    6.339548]  load_module+0x1fa4/0x2098
[    6.339554]  init_module_from_file+0x90/0xe0
[    6.339560]  __arm64_sys_finit_module+0x270/0x370
[    6.339566]  invoke_syscall.constprop.0+0x58/0xf8
[    6.339575]  do_el0_svc+0x48/0xd8
[    6.339582]  el0_svc+0x44/0x190
[    6.339590]  el0t_64_sync_handler+0x10c/0x138
[    6.339597]  el0t_64_sync+0x198/0x1a0
[    6.339606] Code: a90157f3 aa0003f3 f90013f6 f9405c15 (f94002b6) 
[    6.339611] ---[ end trace 0000000000000000 ]---

[    6.456369] Internal error: Oops: 0000000096000007 [#1]  SMP
[    6.456376] Modules linked in: phy_qcom_qmp_usb(+)
[    6.456380] cpufreq: cpufreq_policy_online: CPU4: Running at unlisted initial frequency: 2995200 kHz, changing to: 2649600 kHz
[    6.456383]  reset_qcom_pdc i2c_qcom_geni(+) typec drm_client_lib videobuf2_common camcc_sdm845 gpi(+) qcom_rng qcrypto qcom_q6v5_mss ufs_qcom(+) phy_qcom_qmp_ufs qrtr stm_core cfg80211 slim_qcom_ngd_ctrl(+) slimbus pdr_interface rfkill qcom_q6v5_pas(+) qcom_wdt qcom_pdr_msg icc_osm_l3 qcom_pil_info qcom_q6v5 lmh phy_qcom_qmp_pcie qcom_sysmon qcom_common display_connector qcom_glink_smem icc_bwmon llcc_qcom mdt_loader drm_kms_helper qmi_helpers drm backlight socinfo rmtfs_mem
[    6.456470] CPU: 7 UID: 0 PID: 358 Comm: (udev-worker) Not tainted 6.16.0-rc3-next-20250625 #1 PREEMPT 
[    6.456474] Hardware name: Thundercomm Dragonboard 845c (DT)
[    6.456476] pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.456479] pc : ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom]
[    6.456487] lr : ufshcd_setup_clocks+0x68/0x4c8
[    6.456496] sp : ffff8000860cf660
[    6.456498] x29: ffff8000860cf660 x28: 0000000000000001 x27: ffff000091b01270
[    6.456502] x26: ffff000091b012a0 x25: ffff000091b00870 x24: 0000000000000000
[    6.456506] x23: ffff000091b01280 x22: ffff000091b012a0 x21: 0000000000000000
[    6.456510] x20: ffffd549c1aa3a88 x19: ffff000091b00870 x18: 0000000000000000
[    6.456513] x17: 20646e6966206f74 x16: 20656c62616e5520 x15: 0000000000000000
[    6.456517] x14: ffffffffffffffff x13: 0000000000000030 x12: 0101010101010101
[    6.456521] x11: ffff000082eb9018 x10: 0000000000000000 x9 : ffffd549bf9c25a8
[    6.456524] x8 : ffff8000860cf4d8 x7 : fefefefefefefefe x6 : 0000000000000001
[    6.456528] x5 : ffffffffffffffc8 x4 : 00000000c0000000 x3 : ffffd54945b61058
[    6.456531] x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff000091b00870
[    6.456535] Call trace:
[    6.456537]  ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom] (P)
[    6.456543]  ufshcd_setup_clocks+0x68/0x4c8
[    6.456546]  ufshcd_init+0x278/0xff8
[    6.456549]  ufshcd_pltfrm_init+0x558/0x878
[    6.456554]  ufs_qcom_probe+0x28/0x68 [ufs_qcom]
[    6.456558]  platform_probe+0x70/0xd8
[    6.456563]  really_probe+0xc8/0x3a0
[    6.456566]  __driver_probe_device+0x84/0x170
[    6.456569]  driver_probe_device+0x44/0x120
[    6.456571]  __driver_attach+0xf8/0x208
[    6.456574]  bus_for_each_dev+0x90/0xf8
[    6.456576]  driver_attach+0x2c/0x40
[    6.456578]  bus_add_driver+0x118/0x248
[    6.456581]  driver_register+0x64/0x138
[    6.456583]  __platform_driver_register+0x2c/0x40
[    6.456586]  ufs_qcom_pltform_init+0x28/0xfff8 [ufs_qcom]
[    6.456589]  do_one_initcall+0x60/0x290
[    6.456594]  do_init_module+0x60/0x268
[    6.456598]  load_module+0x1fa4/0x2098
[    6.456601]  init_module_from_file+0x90/0xe0
[    6.456604]  __arm64_sys_finit_module+0x270/0x370
[    6.456607]  invoke_syscall.constprop.0+0x58/0xf8
[    6.456612]  do_el0_svc+0x48/0xd8
[    6.456615]  el0_svc+0x44/0x190
[    6.456620]  el0t_64_sync_handler+0x10c/0x138
[    6.456623]  el0t_64_sync+0x198/0x1a0
[    6.456627] Code: a90157f3 aa0003f3 f90013f6 f9405c15 (f94002b6) 
[    6.456630] ---[ end trace 0000000000000000 ]---

[    6.542061] Internal error: Oops: 0000000096000007 [#1]  SMP
[    6.542064] Modules linked in: i2c_qcom_geni pwrseq_core spi_geni_qcom videobuf2_common phy_qcom_qmp_usb
[    6.549444] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[    6.553217]  qcrypto typec gpi qcom_rng ufs_qcom(+)
[    6.559247] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[    6.564541]  stm_core qcom_q6v5_mss phy_qcom_qmp_ufs qrtr icc_osm_l3
[    6.572849] pci 0000:00:00.0: Adding to iommu group 16
[    6.577699]  cfg80211 pdr_interface qcom_pdr_msg qcom_wdt qcom_q6v5_pas(+) lmh phy_qcom_qmp_pcie rfkill qcom_pil_info
[    6.583288] pci 0000:01:00.0: [1912:0014] type 00 class 0x0c0330 PCIe Endpoint
[    6.586925]  display_connector drm_kms_helper icc_bwmon llcc_qcom qcom_q6v5 drm qcom_sysmon qcom_common
[    6.590418] pci 0000:01:00.0: BAR 0 [mem 0x00000000-0x00001fff 64bit]
[    6.595011]  backlight qcom_glink_smem mdt_loader qmi_helpers socinfo
[    6.598450] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    6.604757]  rmtfs_mem
[    6.604762] CPU: 6 UID: 0 PID: 355 Comm: (udev-worker) Not tainted 6.16.0-rc3-next-20250625 #1 PREEMPT 
[    6.610858] pci 0000:01:00.0: Adding to iommu group 16
[    6.615380] Hardware name: Thundercomm Dragonboard 845c (DT)
[    6.615382] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.615384] pc : ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom]
[    6.629837] pci 0000:00:00.0: bridge window [mem 0x60300000-0x603fffff]: assigned
[    6.630046] qcom-pcie 1c08000.pcie: PCI host bridge to bus 0001:00
[    6.630053] pci_bus 0001:00: root bus resource [bus 00-ff]
[    6.630058] pci_bus 0001:00: root bus resource [io  0x100000-0x1fffff] (bus address [0x0000-0xfffff])
[    6.630061] pci_bus 0001:00: root bus resource [mem 0x40300000-0x5fffffff]
[    6.630246] pci 0001:00:00.0: [17cb:0107] type 01 class 0x060400 PCIe Root Port
[    6.630265] pci 0001:00:00.0: BAR 0 [mem 0x00000000-0x00000fff]
[    6.630271] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[    6.630279] pci 0001:00:00.0:   bridge window [io  0x100000-0x100fff]
[    6.630283] pci 0001:00:00.0:   bridge window [mem 0x00000000-0x000fffff]
[    6.630292] pci 0001:00:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[    6.630355] pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
[    6.630612] pci 0001:00:00.0: Adding to iommu group 17
[    6.632814] pci 0001:00:00.0: BAR 0 [mem 0x40300000-0x40300fff]: assigned
[    6.632823] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[    6.632831] pci_bus 0001:00: resource 4 [io  0x100000-0x1fffff]
[    6.632835] pci_bus 0001:00: resource 5 [mem 0x40300000-0x5fffffff]
[    6.634126] pcieport 0001:00:00.0: PME: Signaling with IRQ 167
[    6.635080] pcieport 0001:00:00.0: AER: enabled with IRQ 167
[    6.639924] lr : ufshcd_setup_clocks+0x68/0x4c8
[    6.643587] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    6.643598] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[    6.643738] xhci-hcd xhci-hcd.0.auto: hcc params 0x0230fe65 hci version 0x110 quirks 0x0000808002000010
[    6.643771] xhci-hcd xhci-hcd.0.auto: irq 168, io mem 0x0a800000
[    6.643876] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    6.643881] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[    6.643887] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[    6.644423] hub 1-0:1.0: USB hub found
[    6.644439] hub 1-0:1.0: 1 port detected
[    6.644613] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    6.644992] hub 2-0:1.0: USB hub found
[    6.645006] hub 2-0:1.0: 1 port detected
[    6.645641] pci 0000:00:00.0: BAR 0 [mem 0x60400000-0x60400fff]: assigned
[    6.655176] sp : ffff80008606f660
[    6.655178] x29: ffff80008606f660 x28: 0000000000000001 x27: ffff000081f8f270
[    6.655182] x26: ffff000081f8f2a0
[    6.662993] pci 0000:01:00.0: BAR 0 [mem 0x60300000-0x60301fff 64bit]: assigned
[    6.667896]  x25: ffff000081f8e870 x24: 0000000000000000
[    6.667898] x23: ffff000081f8f280 x22: ffff000081f8f2a0 x21: 0000000000000000
[    6.674107] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    6.680445] 
[    6.680446] x20: ffffab1988aa3a88 x19: ffff000081f8e870 x18: 0000000000000000
[    6.680450] x17: 6c202c4b34206e67 x16: 696c61202c626920
[    6.685635] pci 0000:00:00.0:   bridge window [mem 0x60300000-0x603fffff]
[    6.696307]  x15: 0000000000000000
[    6.696309] x14: ffffffffffffffff x13: 0000000000000030 x12: 0101010101010101
[    6.696312] x11: ffff00008224a218
[    6.703595] pci_bus 0000:00: resource 4 [io  0x0000-0xfffff]
[    6.713039]  x10: 0000000000000000 x9 : ffffab19869c25a8
[    6.713042] x8 : ffff80008606f4d8 x7 : fefefefefefefefe x6 : 0000000000000001
[    6.719534] pci_bus 0000:00: resource 5 [mem 0x60300000-0x60ffffff]
[    6.726017] 
[    6.726018] x5 : ffffffffffffffc8 x4 : 00000000c0000000 x3 : ffffab197fb31058
[    6.726021] x2 : 0000000000000000
[    6.732162] pci_bus 0000:01: resource 1 [mem 0x60300000-0x603fffff]
[    6.734537]  x1 : 0000000000000001 x0 : ffff000081f8e870
[    6.734541] Call trace:
[    6.745320] pcieport 0000:00:00.0: PME: Signaling with IRQ 170
[    6.749176]  ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom] (P)
[    6.749182]  ufshcd_setup_clocks+0x68/0x4c8
[    6.755379] pcieport 0000:00:00.0: AER: enabled with IRQ 170
[    6.761903]  ufshcd_init+0x278/0xff8
[    6.761907]  ufshcd_pltfrm_init+0x558/0x878
[    6.761911]  ufs_qcom_probe+0x28/0x68 [ufs_qcom]
[    6.767798] pci 0000:01:00.0: enabling device (0000 -> 0002)
[    6.775155]  platform_probe+0x70/0xd8
[    6.775161]  really_probe+0xc8/0x3a0
[    6.781457] pci 0000:01:00.0: quirk_usb_early_handoff+0x0/0xa40 took 13360 usecs
[    6.786913]  __driver_probe_device+0x84/0x170
[    6.786916]  driver_probe_device+0x44/0x120
[    6.797744] remoteproc remoteproc0: adsp is available
[    6.803128]  __driver_attach+0xf8/0x208
[    6.803131]  bus_for_each_dev+0x90/0xf8
[    6.803133]  driver_attach+0x2c/0x40
[    6.803136]  bus_add_driver+0x118/0x248
[    6.803138]  driver_register+0x64/0x138
[    6.803140]  __platform_driver_register+0x2c/0x40
[    6.803143]  ufs_qcom_pltform_init+0x28/0xfff8 [ufs_qcom]
[    6.803148]  do_one_initcall+0x60/0x290
[    6.810675] remoteproc remoteproc0: Direct firmware load for qcom/sdm845/adsp.mbn failed with error -2
[    6.816472]  do_init_module+0x60/0x268
[    6.816477]  load_module+0x1fa4/0x2098
[    6.816479]  init_module_from_file+0x90/0xe0
[    6.816482]  __arm64_sys_finit_module+0x270/0x370
[    6.816485]  invoke_syscall.constprop.0+0x58/0xf8
[    6.816490]  do_el0_svc+0x48/0xd8
[    6.816494]  el0_svc+0x44/0x190
[    6.824078] remoteproc remoteproc1: cdsp is available
[    6.828247]  el0t_64_sync_handler+0x10c/0x138
[    6.828250]  el0t_64_sync+0x198/0x1a0
[    6.828254] Code: a90157f3 aa0003f3 f90013f6 f9405c15 (f94002b6) 
[    6.828257] ---[ end trace 0000000000000000 ]---

[    6.428894] Internal error: Oops: 0000000096000007 [#1]  SMP
[    6.434618] Modules linked in: videobuf2_dma_sg(+) ath10k_core(+) venus_core(+) phy_qcom_qmp_usb v4l2_mem2mem videobuf2_memops pwrseq_core i2c_qcom_geni(+) ath videobuf2_v4l2 spi_geni_qcom(+) typec qcom_q6v5_mss mac80211 qcom_q6v5_pas(+) videobuf2_common qcom_rng gpi qcom_pil_info qrtr ufs_qcom(+) coresight_stm phy_qcom_qmp_ufs stm_core qcrypto cfg80211 qcom_q6v5 phy_qcom_qmp_pcie qcom_sysmon rfkill icc_osm_l3 slim_qcom_ngd_ctrl qcom_common qcom_glink_smem lmh slimbus pdr_interface qcom_wdt qcom_pdr_msg mdt_loader icc_bwmon llcc_qcom display_connector qmi_helpers drm_kms_helper drm backlight socinfo rmtfs_mem
[    6.436909] qcom-venus aa00000.video-codec: non legacy binding
[    6.437969] remoteproc remoteproc0: adsp is available
[    6.438116] remoteproc remoteproc0: Direct firmware load for qcom/sdm845/adsp.mbn failed with error -2
[    6.438132] remoteproc remoteproc0: powering up adsp
[    6.438182] remoteproc remoteproc0: Direct firmware load for qcom/sdm845/adsp.mbn failed with error -2
[    6.438194] remoteproc remoteproc0: request_firmware failed: -2
[    6.441226] remoteproc remoteproc1: cdsp is available
[    6.441354] remoteproc remoteproc1: Direct firmware load for qcom/sdm845/cdsp.mbn failed with error -2
[    6.441370] remoteproc remoteproc1: powering up cdsp
[    6.441418] remoteproc remoteproc1: Direct firmware load for qcom/sdm845/cdsp.mbn failed with error -2
[    6.441432] remoteproc remoteproc1: request_firmware failed: -2
[    6.444754] remoteproc remoteproc2: slpi is available
[    6.444883] remoteproc remoteproc2: Direct firmware load for qcom/sdm845/Thundercomm/db845c/slpi.mbn failed with error -2
[    6.444898] remoteproc remoteproc2: powering up slpi
[    6.444949] remoteproc remoteproc2: Direct firmware load for qcom/sdm845/Thundercomm/db845c/slpi.mbn failed with error -2
[    6.444963] remoteproc remoteproc2: request_firmware failed: -2
[    6.489042] CPU: 3 UID: 0 PID: 383 Comm: (udev-worker) Not tainted 6.16.0-rc3-next-20250625 #1 PREEMPT 
[    6.489050] Hardware name: Thundercomm Dragonboard 845c (DT)
[    6.489054] pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.489060] pc : ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom]
[    6.489077] lr : ufshcd_setup_clocks+0x68/0x4c8
[    6.489092] sp : ffff800084c2f660
[    6.489095] x29: ffff800084c2f660 x28: 0000000000000001 x27: ffff000081f89270
[    6.645851] x26: ffff000081f892a0 x25: ffff000081f88870 x24: 0000000000000000
[    6.653052] x23: ffff000081f89280 x22: ffff000081f892a0 x21: 0000000000000000
[    6.660262] x20: ffffa39efe6a3a88 x19: ffff000081f88870 x18: 0000000000000000
[    6.667470] x17: 3036633831626438 x16: 3432376336306666 x15: 0000000000000000
[    6.674679] x14: ffffffffffffffff x13: 0000000000000030 x12: 0101010101010101
[    6.681882] x11: ffff000082a51718 x10: 0000000000000000 x9 : ffffa39efc5c25a8
[    6.689081] x8 : ffff800084c2f4d8 x7 : fefefefefefefefe x6 : 0000000000000001
[    6.696291] x5 : ffffffffffffffc8 x4 : 00000000c0000000 x3 : ffffa39e8f961058
[    6.703500] x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff000081f88870
[    6.710710] Call trace:
[    6.713189]  ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom] (P)
[    6.718908]  ufshcd_setup_clocks+0x68/0x4c8
[    6.723141]  ufshcd_init+0x278/0xff8
[    6.726759]  ufshcd_pltfrm_init+0x558/0x878
[    6.730993]  ufs_qcom_probe+0x28/0x68 [ufs_qcom]
[    6.735667]  platform_probe+0x70/0xd8
[    6.739375]  really_probe+0xc8/0x3a0
[    6.742993]  __driver_probe_device+0x84/0x170
[    6.747396]  driver_probe_device+0x44/0x120
[    6.751625]  __driver_attach+0xf8/0x208
[    6.755501]  bus_for_each_dev+0x90/0xf8
[    6.759375]  driver_attach+0x2c/0x40
[    6.762992]  bus_add_driver+0x118/0x248
[    6.766867]  driver_register+0x64/0x138
[    6.770742]  __platform_driver_register+0x2c/0x40
[    6.775500]  ufs_qcom_pltform_init+0x28/0xfff8 [ufs_qcom]
[    6.780959]  do_one_initcall+0x60/0x290
[    6.784838]  do_init_module+0x60/0x268
[    6.788630]  load_module+0x1fa4/0x2098
[    6.792419]  init_module_from_file+0x90/0xe0
[    6.796735]  __arm64_sys_finit_module+0x270/0x370
[    6.801491]  invoke_syscall.constprop.0+0x58/0xf8
[    6.806247]  do_el0_svc+0x48/0xd8
[    6.809604]  el0_svc+0x44/0x190
[    6.812785]  el0t_64_sync_handler+0x10c/0x138
[    6.817186]  el0t_64_sync+0x198/0x1a0
[    6.820893] Code: a90157f3 aa0003f3 f90013f6 f9405c15 (f94002b6) 
[    6.827044] ---[ end trace 0000000000000000 ]---

[    6.657742] Internal error: Oops: 0000000096000006 [#1]  SMP
[    6.659843] qcom-pcie 1c08000.pcie: iATU: unroll F, 8 ob, 8 ib, align 4K, limit 1024G
[    6.660187] qcom-pcie 1c08000.pcie: PCI host bridge to bus 0001:00
[    6.660195] pci_bus 0001:00: root bus resource [bus 00-ff]
[    6.660199] pci_bus 0001:00: root bus resource [io  0x0000-0xfffff]
[    6.660203] pci_bus 0001:00: root bus resource [mem 0x40300000-0x5fffffff]
[    6.660413] pci 0001:00:00.0: [17cb:0107] type 01 class 0x060400 PCIe Root Port
[    6.660434] pci 0001:00:00.0: BAR 0 [mem 0x00000000-0x00000fff]
[    6.660441] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[    6.660448] pci 0001:00:00.0:   bridge window [io  0x0000-0x0fff]
[    6.660453] pci 0001:00:00.0:   bridge window [mem 0x00000000-0x000fffff]
[    6.660463] pci 0001:00:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[    6.660530] pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
[    6.660847] pci 0001:00:00.0: Adding to iommu group 16
[    6.663057] pci 0001:00:00.0: BAR 0 [mem 0x40300000-0x40300fff]: assigned
[    6.663066] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[    6.663076] pci_bus 0001:00: resource 4 [io  0x0000-0xfffff]
[    6.663079] pci_bus 0001:00: resource 5 [mem 0x40300000-0x5fffffff]
[    6.664320] pcieport 0001:00:00.0: PME: Signaling with IRQ 180
[    6.664618] pcieport 0001:00:00.0: AER: enabled with IRQ 180
[    6.733825] qcom-pcie 1c00000.pcie: iATU: unroll F, 32 ob, 8 ib, align 4K, limit 4G
[    6.736471] Modules linked in: led_class_multicolor rtc_pm8xxx qcom_pon qcom_vadc_common qcom_spmi_temp_alarm soundcore pwrseq_core qcom_stats i2c_qcom_geni aux_bridge drm_client_lib
[    6.741660] qcom-pcie 1c00000.pcie: PCI host bridge to bus 0000:00
[    6.750855]  spi_geni_qcom phy_qcom_qmp_usb camcc_sdm845 reset_qcom_pdc videobuf2_common typec gpi
[    6.756831] pci_bus 0000:00: root bus resource [bus 00-ff]
[    6.762351]  qcom_rng cfg80211 qrtr rfkill qcom_q6v5_mss
[    6.770073] pci_bus 0000:00: root bus resource [io  0x100000-0x1fffff] (bus address [0x0000-0xfffff])
[    6.779528]  qcrypto phy_qcom_qmp_pcie phy_qcom_qmp_ufs coresight_stm
[    6.785583] pci_bus 0000:00: root bus resource [mem 0x60300000-0x60ffffff]
[    6.791101]  stm_core ufs_qcom(+) slim_qcom_ngd_ctrl display_connector
[    6.799057] pci 0000:00:00.0: [17cb:0106] type 01 class 0x060400 PCIe Root Port
[    6.805394]  drm_kms_helper slimbus qcom_q6v5_pas qcom_pil_info pdr_interface qcom_q6v5
[    6.809199] pci 0000:00:00.0: BAR 0 [mem 0x00000000-0x00000fff]
[    6.813129]  icc_osm_l3 qcom_pdr_msg lmh llcc_qcom qcom_wdt
[    6.821287] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    6.833623]  qcom_sysmon qcom_common qcom_glink_smem mdt_loader icc_bwmon
[    6.845981] pci 0000:00:00.0:   bridge window [io  0x100000-0x100fff]
[    6.858317]  qmi_helpers drm backlight socinfo rmtfs_mem
[    6.870664] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff]
[    6.875743] 
[    6.875747] CPU: 5 UID: 0 PID: 382 Comm: (udev-worker) Not tainted 6.16.0-rc3-next-20250625 #1 PREEMPT 
[    6.886785] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[    6.891781] Hardware name: Thundercomm Dragonboard 845c (DT)
[    6.891784] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.891787] pc : ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom]
[    6.902878] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[    6.908783] lr : ufshcd_setup_clocks+0x68/0x4c8
[    6.912564] pci 0000:00:00.0: Adding to iommu group 17
[    6.926655] sp : ffff800080fc3640
[    6.926656] x29: ffff800080fc3640 x28: 0000000000000001 x27: ffff000083f25270
[    6.926660] x26: ffff000083f252a0 x25: ffff000083f24870 x24: 0000000000000000
[    6.926663] x23: ffff000083f25280 x22: ffff000083f252a0 x21: 0000000000000000
[    6.926667] x20: ffffb5ddcec6fa98 x19: ffff000083f24870 x18: 0000000000000000
[    6.943443] pci 0000:01:00.0: [1912:0014] type 00 class 0x0c0330 PCIe Endpoint
[    6.944716] x17: 20646e6966206f74 x16: 20656c62616e5520 x15: 0000000000000000
[    6.944719] x14: ffffffffffffffff x13: 0000000000000030 x12: 0101010101010101
[    6.944722] x11: ffff00008166f018 x10: 0000000000000000 x9 : ffffb5ddccddc858
[    6.944726] x8 : ffff800080fc34b8
[    6.948481] pci 0000:01:00.0: BAR 0 [mem 0x00000000-0x00001fff 64bit]
[    6.954828]  x7 : fefefefefefefefe x6 : 0000000000000001
[    6.954830] x5 : ffffffffffffffc8 x4 : 00000000c0000000 x3 : ffffb5dd4f59a058
[    6.964998] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    6.968418] x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff000083f24870
[    6.968422] Call trace:
[    6.968424]  ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom] (P)
[    6.972428] pci 0000:01:00.0: Adding to iommu group 17
[    6.978170]  ufshcd_setup_clocks+0x68/0x4c8
[    6.978173]  ufshcd_init+0x278/0xff8
[    6.978176]  ufshcd_pltfrm_init+0x558/0x878
[    6.992227] pci 0000:00:00.0: bridge window [mem 0x60300000-0x603fffff]: assigned
[    6.997995]  ufs_qcom_probe+0x28/0x68 [ufs_qcom]
[    6.997999]  platform_probe+0x70/0xd8
[    7.003532] pci 0000:00:00.0: BAR 0 [mem 0x60400000-0x60400fff]: assigned
[    7.009837]  really_probe+0xc8/0x3a0
[    7.009840]  __driver_probe_device+0x84/0x170
[    7.009843]  driver_probe_device+0x44/0x120
[    7.016774] pci 0000:01:00.0: BAR 0 [mem 0x60300000-0x60301fff 64bit]: assigned
[    7.024127]  __driver_attach+0xf8/0x208
[    7.024130]  bus_for_each_dev+0x90/0xf8
[    7.024132]  driver_attach+0x2c/0x40
[    7.030159] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    7.035360]  bus_add_driver+0x118/0x248
[    7.035363]  driver_register+0x64/0x138
[    7.041511] pci 0000:00:00.0:   bridge window [mem 0x60300000-0x603fffff]
[    7.048341]  __platform_driver_register+0x2c/0x40
[    7.048344]  ufs_qcom_pltform_init+0x28/0xff8 [ufs_qcom]
[    7.056156] pci_bus 0000:00: resource 4 [io  0x100000-0x1fffff]
[    7.062282]  do_one_initcall+0x60/0x290
[    7.062288]  do_init_module+0x60/0x268
[    7.067472] pci_bus 0000:00: resource 5 [mem 0x60300000-0x60ffffff]
[    7.074304]  load_module+0x1f30/0x2050
[    7.074308]  init_module_from_file+0x90/0xe0
[    7.079580] pci_bus 0000:01: resource 1 [mem 0x60300000-0x603fffff]
[    7.085279]  __arm64_sys_finit_module+0x270/0x370
[    7.085282]  invoke_syscall+0x50/0x120
[    7.092874] pcieport 0000:00:00.0: PME: Signaling with IRQ 190
[    7.097474]  el0_svc_common.constprop.0+0x48/0xf0
[    7.097477]  do_el0_svc+0x24/0x38
[    7.097479]  el0_svc+0x3c/0x130
[    7.104409] pcieport 0000:00:00.0: AER: enabled with IRQ 190
[    7.110901]  el0t_64_sync_handler+0x10c/0x138
[    7.110906]  el0t_64_sync+0x198/0x1a0
[    7.110910] Code: a90157f3 aa0003f3 f90013f6 f9405c15 (f94002b6) 
[    7.110913] ---[ end trace 0000000000000000 ]---

[    6.589376] Internal error: Oops: 0000000096000006 [#1]  SMP
[    6.589384] Modules linked in: qcom_q6v5_mss typec(+) stm_core
[    6.594942] cpu cpu0: EM: OPP:576000 is inefficient
[    6.600019]  gpi(+) qcom_rng qrtr cfg80211 qcrypto phy_qcom_qmp_ufs slim_qcom_ngd_ctrl(+)
[    6.605399] cpu cpu0: EM: OPP:480000 is inefficient
[    6.613447]  qcom_q6v5_pas(+) ufs_qcom(+) slimbus rfkill lmh
[    6.619959] cpu cpu0: EM: OPP:403200 is inefficient
[    6.624865]  display_connector icc_osm_l3 qcom_pil_info qcom_wdt
[    6.632949] cpu cpu0: EM: OPP:300000 is inefficient
[    6.638646]  phy_qcom_qmp_pcie pdr_interface drm_kms_helper qcom_q6v5
[    6.646609] cpu cpu0: EM: created perf domain
[    6.654609]  qcom_pdr_msg qcom_sysmon llcc_qcom drm icc_bwmon
[    6.659463] energy_model: Accessing cpu4 policy failed
[    6.664799]  qcom_common qcom_glink_smem mdt_loader qmi_helpers
[    6.678535] qcom-pcie 1c08000.pcie: iATU: unroll F, 8 ob, 8 ib, align 4K, limit 1024G
[    6.679702]  backlight socinfo
[    6.688271] qcom-pcie 1c08000.pcie: PCI host bridge to bus 0001:00
[    6.691838]  rmtfs_mem
[    6.691846] CPU: 7 UID: 0 PID: 387 Comm: (udev-worker) Not tainted 6.16.0-rc3-next-20250625 #1 PREEMPT 
[    6.691856] Hardware name: Thundercomm Dragonboard 845c (DT)
[    6.691860] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.697789] pci_bus 0001:00: root bus resource [bus 00-ff]
[    6.702658] pc : ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom]
[    6.710910] pci_bus 0001:00: root bus resource [io  0x0000-0xfffff]
[    6.715818] lr : ufshcd_setup_clocks+0x68/0x4c8
[    6.721543] pci_bus 0001:00: root bus resource [mem 0x40300000-0x5fffffff]
[    6.726452] sp : ffff80008123b640
[    6.726456] x29: ffff80008123b640 x28: 0000000000000001 x27: ffff00008a7e1270
[    6.733057] pci 0001:00:00.0: [17cb:0107] type 01 class 0x060400 PCIe Root Port
[    6.737427] 
[    6.737430] x26: ffff00008a7e12a0 x25: ffff00008a7e0870 x24: 0000000000000000
[    6.743987] pci 0001:00:00.0: BAR 0 [mem 0x00000000-0x00000fff]
[    6.748325] x23: ffff00008a7e1280 x22: ffff00008a7e12a0 x21: 0000000000000000
[    6.754142] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[    6.759303] x20: ffffc0cea0c6fa98 x19: ffff00008a7e0870 x18: 0000000000000000
[    6.759314] x17: 000000040044ffff x16: 005000f4b5503510 x15: 0000000000000100
[    6.759325] x14: ffffffffffffffff
[    6.765318] pci 0001:00:00.0:   bridge window [io  0x0000-0x0fff]
[    6.773175]  x13: 0000000000000030 x12: 0101010101010101
[    6.773183] x11: ffff00008164d718 x10: 0000000000000000 x9 : ffffc0ce9eddc858
[    6.773194] x8 : ffff80008123b4b8 x7 : fefefefefefefefe x6 : 0000000000000001
[    6.776318] pci 0001:00:00.0:   bridge window [mem 0x00000000-0x000fffff]
[    6.782504] 
[    6.782507] x5 : ffffffffffffffc8 x4 : 00000000c0000000 x3 : ffffc0ce5a6b7058
[    6.784926] pci 0001:00:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[    6.794354] 
[    6.794356] x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff00008a7e0870
[    6.800253] pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
[    6.807081] 
[    6.807085] Call trace:
[    6.807089]  ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom] (P)
[    6.813446] pci 0001:00:00.0: Adding to iommu group 16
[    6.818318]  ufshcd_setup_clocks+0x68/0x4c8
[    6.818325]  ufshcd_init+0x278/0xff8
[    6.829292] pci 0001:00:00.0: BAR 0 [mem 0x40300000-0x40300fff]: assigned
[    6.836151]  ufshcd_pltfrm_init+0x558/0x878
[    6.836162]  ufs_qcom_probe+0x28/0x68 [ufs_qcom]
[    6.839516] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[    6.846692]  platform_probe+0x70/0xd8
[    6.854095] pci_bus 0001:00: resource 4 [io  0x0000-0xfffff]
[    6.855577]  really_probe+0xc8/0x3a0
[    6.862777] pci_bus 0001:00: resource 5 [mem 0x40300000-0x5fffffff]
[    6.868732]  __driver_probe_device+0x84/0x170
[    6.868741]  driver_probe_device+0x44/0x120
[    6.868748]  __driver_attach+0xf8/0x208
[    6.879412] pcieport 0001:00:00.0: PME: Signaling with IRQ 154
[    6.881202]  bus_for_each_dev+0x90/0xf8
[    6.881209]  driver_attach+0x2c/0x40
[    6.881216]  bus_add_driver+0x118/0x248
[    6.881224]  driver_register+0x64/0x138
[    6.892018] qcom-pcie 1c00000.pcie: iATU: unroll F, 32 ob, 8 ib, align 4K, limit 4G
[    6.895603]  __platform_driver_register+0x2c/0x40
[    6.919153] pcieport 0001:00:00.0: AER: enabled with IRQ 154
[    6.924842]  ufs_qcom_pltform_init+0x28/0xff8 [ufs_qcom]
[    6.924855]  do_one_initcall+0x60/0x290
[    6.924865]  do_init_module+0x60/0x268
[    6.934203] qcom-pcie 1c00000.pcie: PCI host bridge to bus 0000:00
[    6.940419]  load_module+0x1f30/0x2050
[    6.940428]  init_module_from_file+0x90/0xe0
[    6.940437]  __arm64_sys_finit_module+0x270/0x370
[    6.940446]  invoke_syscall+0x50/0x120
[    6.940454]  el0_svc_common.constprop.0+0x48/0xf0
[    6.948410] pci_bus 0000:00: root bus resource [bus 00-ff]
[    6.949770]  do_el0_svc+0x24/0x38
[    6.949777]  el0_svc+0x3c/0x130
[    6.957128] pci_bus 0000:00: root bus resource [io  0x100000-0x1fffff] (bus address [0x0000-0xfffff])
[    6.963110]  el0t_64_sync_handler+0x10c/0x138
[    6.963120]  el0t_64_sync+0x198/0x1a0
[    6.963131] Code: a90157f3 aa0003f3 f90013f6 f9405c15 (f94002b6) 
[    6.963136] ---[ end trace 0000000000000000 ]---

[    6.353216] Internal error: Oops: 0000000096000007 [#1]  SMP
[    6.353222] Modules linked in: qcom_rng(+) lmh(+) phy_qcom_qmp_ufs(+) ufs_qcom(+) phy_qcom_qmp_pcie rfkill coresight_stm stm_core qcrypto qrtr display_connector slim_qcom_ngd_ctrl slimbus pdr_interface icc_osm_l3 qcom_wdt qcom_pdr_msg qcom_q6v5_pas(+) qcom_pil_info qcom_q6v5 drm_kms_helper qcom_sysmon llcc_qcom qcom_common icc_bwmon qcom_glink_smem drm mdt_loader qmi_helpers backlight socinfo rmtfs_mem
[    6.353301] CPU: 1 UID: 0 PID: 348 Comm: (udev-worker) Not tainted 6.16.0-rc3-next-20250625 #1 PREEMPT 
[    6.353309] Hardware name: Thundercomm Dragonboard 845c (DT)
[    6.353313] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.353319] pc : ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom]
[    6.353335] lr : ufshcd_setup_clocks+0x68/0x4c8
[    6.353349] sp : ffff800085fcf660
[    6.353352] x29: ffff800085fcf660 x28: 0000000000000001 x27: ffff000080b05270
[    6.353362] x26: ffff000080b052a0 x25: ffff000080b04870 x24: 0000000000000000
[    6.353371] x23: ffff000080b05280 x22: ffff000080b052a0 x21: 0000000000000000
[    6.353381] x20: ffffb105f02a3a88 x19: ffff000080b04870 x18: 0000000000000000
[    6.353390] x17: 5453595342555300 x16: 305f666d745f6973 x15: 0000000000000000
[    6.353399] x14: ffffffffffffffff x13: 0000000000000030 x12: 0101010101010101
[    6.353408] x11: ffff000081910b18 x10: 0000000000000000 x9 : ffffb105ee1c25a8
[    6.353418] x8 : ffff800085fcf4d8 x7 : fefefefefefefefe x6 : 0000000000000001
[    6.353426] x5 : ffffffffffffffc8 x4 : 00000000c0000000 x3 : ffffb105c1af1058
[    6.353435] x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff000080b04870
[    6.353445] Call trace:
[    6.353448]  ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom] (P)
[    6.353462]  ufshcd_setup_clocks+0x68/0x4c8
[    6.353470]  ufshcd_init+0x278/0xff8
[    6.353477]  ufshcd_pltfrm_init+0x558/0x878
[    6.353487]  ufs_qcom_probe+0x28/0x68 [ufs_qcom]
[    6.353497]  platform_probe+0x70/0xd8
[    6.353508]  really_probe+0xc8/0x3a0
[    6.353514]  __driver_probe_device+0x84/0x170
[    6.353521]  driver_probe_device+0x44/0x120
[    6.353528]  __driver_attach+0xf8/0x208
[    6.353534]  bus_for_each_dev+0x90/0xf8
[    6.353540]  driver_attach+0x2c/0x40
[    6.353546]  bus_add_driver+0x118/0x248
[    6.353551]  driver_register+0x64/0x138
[    6.353558]  __platform_driver_register+0x2c/0x40
[    6.353564]  ufs_qcom_pltform_init+0x28/0xfff8 [ufs_qcom]
[    6.353575]  do_one_initcall+0x60/0x290
[    6.353584]  do_init_module+0x60/0x268
[    6.353593]  load_module+0x1fa4/0x2098
[    6.353599]  init_module_from_file+0x90/0xe0
[    6.353606]  __arm64_sys_finit_module+0x270/0x370
[    6.353613]  invoke_syscall.constprop.0+0x58/0xf8
[    6.353623]  do_el0_svc+0x48/0xd8
[    6.353630]  el0_svc+0x44/0x190
[    6.353640]  el0t_64_sync_handler+0x10c/0x138
[    6.353647]  el0t_64_sync+0x198/0x1a0
[    6.353656] Code: a90157f3 aa0003f3 f90013f6 f9405c15 (f94002b6) 
[    6.353661] ---[ end trace 0000000000000000 ]---

[    6.475280] Internal error: Oops: 0000000096000006 [#1]  SMP
[    6.475286] Modules linked in: qcrypto coresight_stm stm_core ufs_qcom(+) qrtr qcom_q6v5_pas(+) cfg80211(+) icc_osm_l3 llcc_qcom display_connector slim_qcom_ngd_ctrl qcom_pil_info qcom_q6v5 slimbus rfkill pdr_interface qcom_sysmon phy_qcom_qmp_pcie lmh drm_kms_helper qcom_pdr_msg icc_bwmon qcom_common qcom_wdt qcom_glink_smem mdt_loader qmi_helpers drm backlight socinfo rmtfs_mem
[    6.475359] CPU: 0 UID: 0 PID: 394 Comm: (udev-worker) Not tainted 6.16.0-rc3-next-20250625 #1 PREEMPT 
[    6.475366] Hardware name: Thundercomm Dragonboard 845c (DT)
[    6.475370] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.475376] pc : ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom]
[    6.475390] lr : ufshcd_setup_clocks+0x68/0x4c8
[    6.475402] sp : ffff8000812ab640
[    6.475404] x29: ffff8000812ab640 x28: 0000000000000001 x27: ffff00008036d270
[    6.475413] x26: ffff00008036d2a0 x25: ffff00008036c870 x24: 0000000000000000
[    6.475422] x23: ffff00008036d280 x22: ffff00008036d2a0 x21: 0000000000000000
[    6.475431] x20: ffffb5409b86fa98 x19: ffff00008036c870 x18: ffffffffffffffff
[    6.475439] x17: ffffb5409b646e30 x16: ffffb5409994b7a0 x15: ffff800081453820
[    6.475448] x14: ffffffffffffffff x13: 0000000000000030 x12: 0101010101010101
[    6.475456] x11: ffff000080245318 x10: 0000000000000000 x9 : ffffb540999dc858
[    6.475465] x8 : ffff8000812ab4b8 x7 : fefefefefefefefe x6 : 0000000000000001
[    6.475473] x5 : ffffffffffffffc8 x4 : 00000000c0000000 x3 : ffffb5402c21b058
[    6.475481] x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff00008036c870
[    6.475490] Call trace:
[    6.475495]  ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom] (P)
[    6.475506]  ufshcd_setup_clocks+0x68/0x4c8
[    6.475511]  ufshcd_init+0x278/0xff8
[    6.475519]  ufshcd_pltfrm_init+0x558/0x878
[    6.475528]  ufs_qcom_probe+0x28/0x68 [ufs_qcom]
[    6.475538]  platform_probe+0x70/0xd8
[    6.475548]  really_probe+0xc8/0x3a0
[    6.475554]  __driver_probe_device+0x84/0x170
[    6.475561]  driver_probe_device+0x44/0x120
[    6.475567]  __driver_attach+0xf8/0x208
[    6.475572]  bus_for_each_dev+0x90/0xf8
[    6.475578]  driver_attach+0x2c/0x40
[    6.475584]  bus_add_driver+0x118/0x248
[    6.475590]  driver_register+0x64/0x138
[    6.475596]  __platform_driver_register+0x2c/0x40
[    6.475603]  ufs_qcom_pltform_init+0x28/0xff8 [ufs_qcom]
[    6.475612]  do_one_initcall+0x60/0x290
[    6.475620]  do_init_module+0x60/0x268
[    6.475629]  load_module+0x1f30/0x2050
[    6.475635]  init_module_from_file+0x90/0xe0
[    6.475642]  __arm64_sys_finit_module+0x270/0x370
[    6.475649]  invoke_syscall+0x50/0x120
[    6.475655]  el0_svc_common.constprop.0+0x48/0xf0
[    6.475661]  do_el0_svc+0x24/0x38
[    6.475665]  el0_svc+0x3c/0x130
[    6.475675]  el0t_64_sync_handler+0x10c/0x138
[    6.475683]  el0t_64_sync+0x198/0x1a0
[    6.475692] Code: a90157f3 aa0003f3 f90013f6 f9405c15 (f94002b6) 
[    6.475697] ---[ end trace 0000000000000000 ]---

[    6.501907] Internal error: Oops: 0000000096000006 [#1]  SMP
[    6.501914] Modules linked in: phy_qcom_qmp_pcie ufs_qcom(+) phy_qcom_qmp_ufs rfkill qrtr slim_qcom_ngd_ctrl(+) icc_osm_l3 slimbus qcom_q6v5_pas(+) pdr_interface qcom_pil_info qcom_wdt qcom_q6v5 lmh qcom_pdr_msg qcom_sysmon llcc_qcom icc_bwmon display_connector qcom_common qcom_glink_smem drm_kms_helper mdt_loader qmi_helpers drm backlight socinfo rmtfs_mem
[    6.501996] CPU: 5 UID: 0 PID: 348 Comm: (udev-worker) Not tainted 6.16.0-rc3-next-20250625 #1 PREEMPT 
[    6.502006] Hardware name: Thundercomm Dragonboard 845c (DT)
[    6.502010] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.502018] pc : ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom]
[    6.502037] lr : ufshcd_setup_clocks+0x68/0x4c8
[    6.502049] sp : ffff8000813f3640
[    6.502052] x29: ffff8000813f3640 x28: 0000000000000001 x27: ffff00008039d270
[    6.502064] x26: ffff00008039d2a0 x25: ffff00008039c870 x24: 0000000000000000
[    6.502075] x23: ffff00008039d280 x22: ffff00008039d2a0 x21: 0000000000000000
[    6.502087] x20: ffffd630a12afb18 x19: ffff00008039c870 x18: 0000000000000000
[    6.502098] x17: 5453595342555300 x16: 305f666d745f6973 x15: 0000000000000100
[    6.502109] x14: ffffffffffffffff x13: 0000000000000030 x12: 0101010101010101
[    6.502120] x11: ffff0000816f3418 x10: 0000000000000000 x9 : ffffd6309f3dea58
[    6.502130] x8 : ffff8000813f34b8 x7 : fefefefefefefefe x6 : 0000000000000001
[    6.502141] x5 : ffffffffffffffc8 x4 : 00000000c0000000 x3 : ffffd63068f94058
[    6.502151] x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff00008039c870
[    6.502162] Call trace:
[    6.502166]  ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom] (P)
[    6.502181]  ufshcd_setup_clocks+0x68/0x4c8
[    6.502188]  ufshcd_init+0x278/0xff8
[    6.502198]  ufshcd_pltfrm_init+0x558/0x878
[    6.502208]  ufs_qcom_probe+0x28/0x68 [ufs_qcom]
[    6.502220]  platform_probe+0x70/0xd8
[    6.502231]  really_probe+0xc8/0x3a0
[    6.502240]  __driver_probe_device+0x84/0x170
[    6.502247]  driver_probe_device+0x44/0x120
[    6.502255]  __driver_attach+0xf8/0x208
[    6.502262]  bus_for_each_dev+0x90/0xf8
[    6.502269]  driver_attach+0x2c/0x40
[    6.502276]  bus_add_driver+0x118/0x248
[    6.502283]  driver_register+0x64/0x138
[    6.502291]  __platform_driver_register+0x2c/0x40
[    6.502300]  ufs_qcom_pltform_init+0x28/0xff8 [ufs_qcom]
[    6.502312]  do_one_initcall+0x60/0x290
[    6.502322]  do_init_module+0x60/0x268
[    6.502332]  load_module+0x1f30/0x2050
[    6.502341]  init_module_from_file+0x90/0xe0
[    6.502349]  __arm64_sys_finit_module+0x270/0x370
[    6.502358]  invoke_syscall+0x50/0x120
[    6.502365]  el0_svc_common.constprop.0+0x48/0xf0
[    6.502372]  do_el0_svc+0x24/0x38
[    6.502378]  el0_svc+0x3c/0x130
[    6.502390]  el0t_64_sync_handler+0x10c/0x138
[    6.502400]  el0t_64_sync+0x198/0x1a0
[    6.502411] Code: a90157f3 aa0003f3 f90013f6 f9405c15 (f94002b6) 
[    6.502416] ---[ end trace 0000000000000000 ]---

[    6.476177] Internal error: Oops: 0000000096000006 [#1]  SMP
[    6.476184] Modules linked in: ufs_qcom(+) phy_qcom_qmp_ufs(+) qrtr(+) qcom_q6v5_pas(+) cfg80211(+) qcom_pil_info icc_osm_l3 drm_kms_helper slim_qcom_ngd_ctrl(+) slimbus pdr_interface qcom_pdr_msg phy_qcom_qmp_pcie rfkill qcom_wdt lmh qcom_q6v5 qcom_sysmon icc_bwmon llcc_qcom qcom_common qcom_glink_smem mdt_loader qmi_helpers drm backlight socinfo rmtfs_mem
[    6.476260] CPU: 7 UID: 0 PID: 385 Comm: (udev-worker) Not tainted 6.16.0-rc3-next-20250625 #1 PREEMPT 
[    6.476271] Hardware name: Thundercomm Dragonboard 845c (DT)
[    6.476275] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.476283] pc : ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom]
[    6.476299] lr : ufshcd_setup_clocks+0x68/0x4c8
[    6.476311] sp : ffff80008123b640
[    6.476315] x29: ffff80008123b640 x28: 0000000000000001 x27: ffff00008b3e9270
[    6.476327] x26: ffff00008b3e92a0 x25: ffff00008b3e8870 x24: 0000000000000000
[    6.476338] x23: ffff00008b3e9280 x22: ffff00008b3e92a0 x21: 0000000000000000
[    6.476350] x20: ffffdb908486fa98 x19: ffff00008b3e8870 x18: 0000000000000000
[    6.476361] x17: 5453595342555300 x16: 305f666d745f6973 x15: 0000000000000100
[    6.476372] x14: ffffffffffffffff x13: 0000000000000030 x12: 0101010101010101
[    6.476383] x11: ffff00008163bc18 x10: 0000000000000000 x9 : ffffdb90829dc998
[    6.476394] x8 : ffff80008123b4b8 x7 : fefefefefefefefe x6 : 0000000000000001
[    6.476404] x5 : ffffffffffffffc8 x4 : 00000000c0000000 x3 : ffffdb90319b3058
[    6.476415] x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff00008b3e8870
[    6.476426] Call trace:
[    6.476430]  ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom] (P)
[    6.476445]  ufshcd_setup_clocks+0x68/0x4c8
[    6.476452]  ufshcd_init+0x278/0xff8
[    6.476462]  ufshcd_pltfrm_init+0x558/0x878
[    6.476474]  ufs_qcom_probe+0x28/0x68 [ufs_qcom]
[    6.476486]  platform_probe+0x70/0xd8
[    6.476498]  really_probe+0xc8/0x3a0
[    6.476506]  __driver_probe_device+0x84/0x170
[    6.476515]  driver_probe_device+0x44/0x120
[    6.476523]  __driver_attach+0xf8/0x208
[    6.476531]  bus_for_each_dev+0x90/0xf8
[    6.476538]  driver_attach+0x2c/0x40
[    6.476545]  bus_add_driver+0x118/0x248
[    6.476552]  driver_register+0x64/0x138
[    6.476561]  __platform_driver_register+0x2c/0x40
[    6.476570]  ufs_qcom_pltform_init+0x28/0xff8 [ufs_qcom]
[    6.476581]  do_one_initcall+0x60/0x290
[    6.476591]  do_init_module+0x60/0x268
[    6.476602]  load_module+0x1f30/0x2050
[    6.476611]  init_module_from_file+0x90/0xe0
[    6.476620]  __arm64_sys_finit_module+0x270/0x370
[    6.476629]  invoke_syscall+0x50/0x120
[    6.476636]  el0_svc_common.constprop.0+0x48/0xf0
[    6.476643]  do_el0_svc+0x24/0x38
[    6.476649]  el0_svc+0x3c/0x130
[    6.476661]  el0t_64_sync_handler+0x10c/0x138
[    6.476673]  el0t_64_sync+0x198/0x1a0
[    6.476683] Code: a90157f3 aa0003f3 f90013f6 f9405c15 (f94002b6) 
[    6.476689] ---[ end trace 0000000000000000 ]---

[    6.462832] Internal error: Oops: 0000000096000006 [#1]  SMP
[    6.462839] Modules linked in: qcrypto ufs_qcom(+) qcom_wdt phy_qcom_qmp_ufs qrtr cfg80211(+) phy_qcom_qmp_pcie slim_qcom_ngd_ctrl(+) slimbus rfkill pdr_interface qcom_pdr_msg icc_osm_l3 lmh icc_bwmon qcom_q6v5_pas(+) llcc_qcom qcom_pil_info display_connector qcom_q6v5 qcom_sysmon qcom_common drm_kms_helper qcom_glink_smem mdt_loader qmi_helpers drm backlight socinfo rmtfs_mem
[    6.462912] CPU: 0 UID: 0 PID: 378 Comm: (udev-worker) Not tainted 6.16.0-rc3-next-20250625 #1 PREEMPT 
[    6.462919] Hardware name: Thundercomm Dragonboard 845c (DT)
[    6.462923] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.462929] pc : ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom]
[    6.462949] lr : ufshcd_setup_clocks+0x68/0x4c8
[    6.462961] sp : ffff80008127b640
[    6.462963] x29: ffff80008127b640 x28: 0000000000000001 x27: ffff0000857bb270
[    6.462972] x26: ffff0000857bb2a0 x25: ffff0000857ba870 x24: 0000000000000000
[    6.462981] x23: ffff0000857bb280 x22: ffff0000857bb2a0 x21: 0000000000000000
[    6.462989] x20: ffffaa517bc6fa98 x19: ffff0000857ba870 x18: 0000000000000000
[    6.462998] x17: 7364612f3534386d x16: 64732f6d6f637120 x15: 0000000000000100
[    6.463007] x14: ffffffffffffffff x13: 0000000000000030 x12: 0101010101010101
[    6.463016] x11: ffff000080245018 x10: 0000000000000000 x9 : ffffaa5179ddc858
[    6.463024] x8 : ffff80008127b4b8 x7 : fefefefefefefefe x6 : 0000000000000001
[    6.463032] x5 : ffffffffffffffc8 x4 : 00000000c0000000 x3 : ffffaa511b78a058
[    6.463041] x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff0000857ba870
[    6.463049] Call trace:
[    6.463053]  ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom] (P)
[    6.463065]  ufshcd_setup_clocks+0x68/0x4c8
[    6.463071]  ufshcd_init+0x278/0xff8
[    6.463078]  ufshcd_pltfrm_init+0x558/0x878
[    6.463086]  ufs_qcom_probe+0x28/0x68 [ufs_qcom]
[    6.463096]  platform_probe+0x70/0xd8
[    6.463106]  really_probe+0xc8/0x3a0
[    6.463112]  __driver_probe_device+0x84/0x170
[    6.463119]  driver_probe_device+0x44/0x120
[    6.463124]  __driver_attach+0xf8/0x208
[    6.463130]  bus_for_each_dev+0x90/0xf8
[    6.463136]  driver_attach+0x2c/0x40
[    6.463141]  bus_add_driver+0x118/0x248
[    6.463147]  driver_register+0x64/0x138
[    6.463153]  __platform_driver_register+0x2c/0x40
[    6.463160]  ufs_qcom_pltform_init+0x28/0xff8 [ufs_qcom]
[    6.463169]  do_one_initcall+0x60/0x290
[    6.463178]  do_init_module+0x60/0x268
[    6.463187]  load_module+0x1f30/0x2050
[    6.463194]  init_module_from_file+0x90/0xe0
[    6.463201]  __arm64_sys_finit_module+0x270/0x370
[    6.463208]  invoke_syscall+0x50/0x120
[    6.463214]  el0_svc_common.constprop.0+0x48/0xf0
[    6.463220]  do_el0_svc+0x24/0x38
[    6.463225]  el0_svc+0x3c/0x130
[    6.463234]  el0t_64_sync_handler+0x10c/0x138
[    6.463242]  el0t_64_sync+0x198/0x1a0
[    6.463251] Code: a90157f3 aa0003f3 f90013f6 f9405c15 (f94002b6) 
[    6.463256] ---[ end trace 0000000000000000 ]---

[    6.556029] Internal error: Oops: 0000000096000006 [#1]  SMP
[    6.556032] Modules linked in: coresight_stm(+) gpi(+) ufs_qcom(+) qcrypto(+) phy_qcom_qmp_usb qcom_q6v5_mss qcom_rng(+) stm_core phy_qcom_qmp_ufs phy_qcom_qmp_pcie(+) cfg80211(+) slim_qcom_ngd_ctrl slimbus rfkill qcom_wdt pdr_interface lmh qcom_pdr_msg icc_osm_l3 qrtr llcc_qcom icc_bwmon qcom_q6v5_pas qcom_pil_info qcom_q6v5 qcom_sysmon display_connector qcom_common qcom_glink_smem drm_kms_helper mdt_loader qmi_helpers drm backlight socinfo rmtfs_mem
[    6.556069] CPU: 4 UID: 0 PID: 384 Comm: (udev-worker) Not tainted 6.16.0-rc3-next-20250625 #1 PREEMPT 
[    6.556072] Hardware name: Thundercomm Dragonboard 845c (DT)
[    6.556074] pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.556077] pc : ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom]
[    6.556084] lr : ufshcd_setup_clocks+0x68/0x4c8
[    6.556091] sp : ffff80008133b640
[    6.556092] x29: ffff80008133b640 x28: 0000000000000001 x27: ffff00008d731270
[    6.556096] x26: ffff00008d7312a0 x25: ffff00008d730870 x24: 0000000000000000
[    6.556100] x23: ffff00008d731280 x22: ffff00008d7312a0 x21: 0000000000000000
[    6.556103] x20: ffffb1db6ac6fa98 x19: ffff00008d730870 x18: 0000000000000000
[    6.556107] x17: 5453595342555300 x16: 305f666d745f6973 x15: 0000000000000100
[    6.556110] x14: ffffffffffffffff x13: 0000000000000030 x12: 0101010101010101
[    6.556114] x11: ffff000080dac818 x10: 0000000000000000 x9 : ffffb1db68ddc858
[    6.556117] x8 : ffff80008133b4b8 x7 : fefefefefefefefe x6 : 0000000000000001
[    6.556121] x5 : ffffffffffffffc8 x4 : 00000000c0000000 x3 : ffffb1db0185c058
[    6.556124] x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff00008d730870
[    6.556128] Call trace:
[    6.556130]  ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom] (P)
[    6.556136]  ufshcd_setup_clocks+0x68/0x4c8
[    6.556138]  ufshcd_init+0x278/0xff8
[    6.556142]  ufshcd_pltfrm_init+0x558/0x878
[    6.556146]  ufs_qcom_probe+0x28/0x68 [ufs_qcom]
[    6.556150]  platform_probe+0x70/0xd8
[    6.556155]  really_probe+0xc8/0x3a0
[    6.556158]  __driver_probe_device+0x84/0x170
[    6.556161]  driver_probe_device+0x44/0x120
[    6.556163]  __driver_attach+0xf8/0x208
[    6.556166]  bus_for_each_dev+0x90/0xf8
[    6.556168]  driver_attach+0x2c/0x40
[    6.556170]  bus_add_driver+0x118/0x248
[    6.556172]  driver_register+0x64/0x138
[    6.556175]  __platform_driver_register+0x2c/0x40
[    6.556177]  ufs_qcom_pltform_init+0x28/0xff8 [ufs_qcom]
[    6.556181]  do_one_initcall+0x60/0x290
[    6.556186]  do_init_module+0x60/0x268
[    6.556190]  load_module+0x1f30/0x2050
[    6.556193]  init_module_from_file+0x90/0xe0
[    6.556195]  __arm64_sys_finit_module+0x270/0x370
[    6.556198]  invoke_syscall+0x50/0x120
[    6.556201]  el0_svc_common.constprop.0+0x48/0xf0
[    6.556203]  do_el0_svc+0x24/0x38
[    6.556206]  el0_svc+0x3c/0x130
[    6.556211]  el0t_64_sync_handler+0x10c/0x138
[    6.556215]  el0t_64_sync+0x198/0x1a0
[    6.556219] Code: a90157f3 aa0003f3 f90013f6 f9405c15 (f94002b6) 
[    6.556221] ---[ end trace 0000000000000000 ]---

[    6.655897] Internal error: Oops: 0000000096000006 [#1]  SMP
[    6.661604] Modules linked in: qcom_stats snd ath10k_core videobuf2_dma_sg v4l2_mem2mem(+) reset_qcom_pdc(+) soundcore phy_qcom_qmp_combo(+) videobuf2_memops ath pwrseq_core cec aux_bridge videobuf2_v4l2 drm_client_lib mac80211 i2c_qcom_geni(+) typec camcc_sdm845(+) coresight_stm(+) spi_geni_qcom(+) videobuf2_common phy_qcom_qmp_usb(+) gpi(+) qcom_rng qcom_q6v5_mss stm_core qrtr slim_qcom_ngd_ctrl cfg80211 ufs_qcom(+) slimbus pdr_interface phy_qcom_qmp_ufs rfkill qcom_q6v5_pas(+) qcom_pil_info qcrypto qcom_q6v5 icc_osm_l3 phy_qcom_qmp_pcie qcom_wdt lmh qcom_pdr_msg llcc_qcom icc_bwmon qcom_sysmon qcom_common display_connector qcom_glink_smem mdt_loader drm_kms_helper qmi_helpers drm backlight socinfo rmtfs_mem
[    6.724959] CPU: 7 UID: 0 PID: 392 Comm: (udev-worker) Not tainted 6.16.0-rc3-next-20250625 #1 PREEMPT 
[    6.734429] Hardware name: Thundercomm Dragonboard 845c (DT)
[    6.740134] pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.747146] pc : ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom]
[    6.752859] lr : ufshcd_setup_clocks+0x68/0x4c8
[    6.757431] sp : ffff800081303640
[    6.760776] x29: ffff800081303640 x28: 0000000000000001 x27: ffff00008cda1270
[    6.767973] x26: ffff00008cda12a0 x25: ffff00008cda0870 x24: 0000000000000000
[    6.775169] x23: ffff00008cda1280 x22: ffff00008cda12a0 x21: 0000000000000000
[    6.782365] x20: ffffd598eba6fa98 x19: ffff00008cda0870 x18: 0000000000000000
[    6.789561] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000100
[    6.796757] x14: ffffffffffffffff x13: 0000000000000030 x12: 0101010101010101
[    6.803953] x11: ffff000085192c18 x10: 0000000000000000 x9 : ffffd598e9bdc858
[    6.811149] x8 : ffff8000813034b8 x7 : fefefefefefefefe x6 : 0000000000000001
[    6.818345] x5 : ffffffffffffffc8 x4 : 00000000c0000000 x3 : ffffd59874012058
[    6.825540] x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff00008cda0870
[    6.832736] Call trace:
[    6.835213]  ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom] (P)
[    6.840922]  ufshcd_setup_clocks+0x68/0x4c8
[    6.845146]  ufshcd_init+0x278/0xff8
[    6.848761]  ufshcd_pltfrm_init+0x558/0x878
[    6.852987]  ufs_qcom_probe+0x28/0x68 [ufs_qcom]
[    6.857643]  platform_probe+0x70/0xd8
[    6.861345]  really_probe+0xc8/0x3a0
[    6.864959]  __driver_probe_device+0x84/0x170
[    6.869355]  driver_probe_device+0x44/0x120
[    6.873579]  __driver_attach+0xf8/0x208
[    6.877451]  bus_for_each_dev+0x90/0xf8
[    6.881321]  driver_attach+0x2c/0x40
[    6.884935]  bus_add_driver+0x118/0x248
[    6.888806]  driver_register+0x64/0x138
[    6.892677]  __platform_driver_register+0x2c/0x40
[    6.897417]  ufs_qcom_pltform_init+0x28/0xff8 [ufs_qcom]
[    6.902779]  do_one_initcall+0x60/0x290
[    6.906653]  do_init_module+0x60/0x268
[    6.910440]  load_module+0x1f30/0x2050
[    6.914225]  init_module_from_file+0x90/0xe0
[    6.918536]  __arm64_sys_finit_module+0x270/0x370
[    6.923287]  invoke_syscall+0x50/0x120
[    6.927072]  el0_svc_common.constprop.0+0x48/0xf0
[    6.931811]  do_el0_svc+0x24/0x38
[    6.935156]  el0_svc+0x3c/0x130
[    6.938332]  el0t_64_sync_handler+0x10c/0x138
[    6.942729]  el0t_64_sync+0x198/0x1a0
[    6.946430] Code: a90157f3 aa0003f3 f90013f6 f9405c15 (f94002b6) 
[    6.952574] ---[ end trace 0000000000000000 ]---

[    6.573386] Internal error: Oops: 0000000096000006 [#1]  SMP
[    6.573393] Modules linked in: videobuf2_v4l2(+) videobuf2_common typec phy_qcom_qmp_usb cfg80211(+) gpi coresight_stm(+) qcom_q6v5_mss stm_core phy_qcom_qmp_ufs(+) phy_qcom_qmp_pcie qcrypto ufs_qcom(+) rfkill qrtr icc_osm_l3 lmh slim_qcom_ngd_ctrl slimbus pdr_interface qcom_wdt qcom_pdr_msg qcom_q6v5_pas(+) qcom_pil_info llcc_qcom icc_bwmon qcom_q6v5 display_connector qcom_sysmon qcom_common qcom_glink_smem drm_kms_helper mdt_loader qmi_helpers drm backlight socinfo rmtfs_mem
[    6.573496] CPU: 5 UID: 0 PID: 380 Comm: (udev-worker) Not tainted 6.16.0-rc3-next-20250625 #1 PREEMPT 
[    6.573506] Hardware name: Thundercomm Dragonboard 845c (DT)
[    6.573510] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.573517] pc : ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom]
[    6.573535] lr : ufshcd_setup_clocks+0x68/0x4c8
[    6.573547] sp : ffff800081263640
[    6.573551] x29: ffff800081263640 x28: 0000000000000001 x27: ffff00008a701270
[    6.573562] x26: ffff00008a7012a0 x25: ffff00008a700870 x24: 0000000000000000
[    6.573574] x23: ffff00008a701280 x22: ffff00008a7012a0 x21: 0000000000000000
[    6.573585] x20: ffffd3a69346fa98 x19: ffff00008a700870 x18: 0000000000000000
[    6.573595] x17: 5453595342555300 x16: 305f666d745f6973 x15: 0000000000000100
[    6.573606] x14: ffffffffffffffff x13: 0000000000000030 x12: 0101010101010101
[    6.573617] x11: ffff0000818f3418 x10: 0000000000000000 x9 : ffffd3a6915dc858
[    6.573627] x8 : ffff8000812634b8 x7 : fefefefefefefefe x6 : 0000000000000001
[    6.573638] x5 : ffffffffffffffc8 x4 : 00000000c0000000 x3 : ffffd3a64d14b058
[    6.573648] x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff00008a700870
[    6.573659] Call trace:
[    6.573663]  ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom] (P)
[    6.573678]  ufshcd_setup_clocks+0x68/0x4c8
[    6.573685]  ufshcd_init+0x278/0xff8
[    6.573694]  ufshcd_pltfrm_init+0x558/0x878
[    6.573704]  ufs_qcom_probe+0x28/0x68 [ufs_qcom]
[    6.573716]  platform_probe+0x70/0xd8
[    6.573727]  really_probe+0xc8/0x3a0
[    6.573736]  __driver_probe_device+0x84/0x170
[    6.573743]  driver_probe_device+0x44/0x120
[    6.573751]  __driver_attach+0xf8/0x208
[    6.573758]  bus_for_each_dev+0x90/0xf8
[    6.573765]  driver_attach+0x2c/0x40
[    6.573771]  bus_add_driver+0x118/0x248
[    6.573778]  driver_register+0x64/0x138
[    6.573786]  __platform_driver_register+0x2c/0x40
[    6.573796]  ufs_qcom_pltform_init+0x28/0xff8 [ufs_qcom]
[    6.573807]  do_one_initcall+0x60/0x290
[    6.573817]  do_init_module+0x60/0x268
[    6.573827]  load_module+0x1f30/0x2050
[    6.573836]  init_module_from_file+0x90/0xe0
[    6.573845]  __arm64_sys_finit_module+0x270/0x370
[    6.573853]  invoke_syscall+0x50/0x120
[    6.573860]  el0_svc_common.constprop.0+0x48/0xf0
[    6.573867]  do_el0_svc+0x24/0x38
[    6.573873]  el0_svc+0x3c/0x130
[    6.573885]  el0t_64_sync_handler+0x10c/0x138
[    6.573895]  el0t_64_sync+0x198/0x1a0
[    6.573905] Code: a90157f3 aa0003f3 f90013f6 f9405c15 (f94002b6) 
[    6.573911] ---[ end trace 0000000000000000 ]---

[    6.456291] Internal error: Oops: 0000000096000006 [#1]  SMP
[    6.456298] Modules linked in: phy_qcom_qmp_ufs(+) ufs_qcom(+) qrtr rfkill lmh phy_qcom_qmp_pcie icc_osm_l3 qcom_q6v5_pas(+) slim_qcom_ngd_ctrl qcom_pil_info slimbus pdr_interface qcom_pdr_msg display_connector qcom_q6v5 qcom_sysmon icc_bwmon qcom_common drm_kms_helper qcom_wdt qcom_glink_smem mdt_loader llcc_qcom qmi_helpers drm backlight socinfo rmtfs_mem
[    6.456361] CPU: 2 UID: 0 PID: 395 Comm: (udev-worker) Not tainted 6.16.0-rc3-next-20250625 #1 PREEMPT 
[    6.456368] Hardware name: Thundercomm Dragonboard 845c (DT)
[    6.456372] pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.456377] pc : ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom]
[    6.456393] lr : ufshcd_setup_clocks+0x68/0x4c8
[    6.456405] sp : ffff800081363640
[    6.456408] x29: ffff800081363640 x28: 0000000000000001 x27: ffff00008b993270
[    6.456417] x26: ffff00008b9932a0 x25: ffff00008b992870 x24: 0000000000000000
[    6.456426] x23: ffff00008b993280 x22: ffff00008b9932a0 x21: 0000000000000000
[    6.456434] x20: ffffd5d7e8e6fa98 x19: ffff00008b992870 x18: 0000000000000000
[    6.456443] x17: 5453595342555300 x16: 305f666d745f6973 x15: 0000000000000100
[    6.456451] x14: ffffffffffffffff x13: 0000000000000030 x12: 0101010101010101
[    6.456460] x11: ffff000080ce0c18 x10: 0000000000000000 x9 : ffffd5d7e6fdc858
[    6.456468] x8 : ffff8000813634b8 x7 : fefefefefefefefe x6 : 0000000000000001
[    6.456476] x5 : ffffffffffffffc8 x4 : 00000000c0000000 x3 : ffffd5d7c6b4d058
[    6.456485] x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff00008b992870
[    6.456494] Call trace:
[    6.456498]  ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom] (P)
[    6.456509]  ufshcd_setup_clocks+0x68/0x4c8
[    6.456514]  ufshcd_init+0x278/0xff8
[    6.456522]  ufshcd_pltfrm_init+0x558/0x878
[    6.456531]  ufs_qcom_probe+0x28/0x68 [ufs_qcom]
[    6.456540]  platform_probe+0x70/0xd8
[    6.456550]  really_probe+0xc8/0x3a0
[    6.456557]  __driver_probe_device+0x84/0x170
[    6.456563]  driver_probe_device+0x44/0x120
[    6.456569]  __driver_attach+0xf8/0x208
[    6.456575]  bus_for_each_dev+0x90/0xf8
[    6.456581]  driver_attach+0x2c/0x40
[    6.456587]  bus_add_driver+0x118/0x248
[    6.456592]  driver_register+0x64/0x138
[    6.456599]  __platform_driver_register+0x2c/0x40
[    6.456605]  ufs_qcom_pltform_init+0x28/0xff8 [ufs_qcom]
[    6.456615]  do_one_initcall+0x60/0x290
[    6.456624]  do_init_module+0x60/0x268
[    6.456632]  load_module+0x1f30/0x2050
[    6.456639]  init_module_from_file+0x90/0xe0
[    6.456645]  __arm64_sys_finit_module+0x270/0x370
[    6.456652]  invoke_syscall+0x50/0x120
[    6.456658]  el0_svc_common.constprop.0+0x48/0xf0
[    6.456664]  do_el0_svc+0x24/0x38
[    6.456669]  el0_svc+0x3c/0x130
[    6.456679]  el0t_64_sync_handler+0x10c/0x138
[    6.456688]  el0t_64_sync+0x198/0x1a0
[    6.456697] Code: a90157f3 aa0003f3 f90013f6 f9405c15 (f94002b6) 
[    6.456702] ---[ end trace 0000000000000000 ]---

[    6.591789] Internal error: Oops: 0000000096000006 [#1]  SMP
[    6.591795] Modules linked in:
[    6.594382] remoteproc remoteproc3: 4080000.remoteproc is available
[    6.597797] pci_bus 0001:00: resource 4 [io  0x0000-0xfffff]
[    6.602850]  reset_qcom_pdc i2c_qcom_geni videobuf2_common pwrseq_core
[    6.608096] pci 0000:01:00.0: quirk_usb_early_handoff+0x0/0xa58 took 16492 usecs
[    6.613894] pci_bus 0001:00: resource 5 [mem 0x40300000-0x5fffffff]
[    6.618889]  drm_client_lib phy_qcom_qmp_usb camcc_sdm845
[    6.631229] pcieport 0001:00:00.0: PME: Signaling with IRQ 187
[    6.635892]  spi_geni_qcom qcom_rng typec gpi stm_core
[    6.639100] pcieport 0001:00:00.0: AER: enabled with IRQ 187
[    6.650184]  qcom_q6v5_mss icc_osm_l3 slim_qcom_ngd_ctrl qcrypto phy_qcom_qmp_ufs ufs_qcom(+) cfg80211 qcom_wdt qrtr slimbus phy_qcom_qmp_pcie lmh rfkill pdr_interface qcom_pdr_msg llcc_qcom icc_bwmon display_connector qcom_q6v5_pas qcom_pil_info qcom_q6v5 qcom_sysmon qcom_common drm_kms_helper qcom_glink_smem mdt_loader qmi_helpers drm backlight socinfo rmtfs_mem
[    7.310124] CPU: 3 UID: 0 PID: 347 Comm: (udev-worker) Not tainted 6.16.0-rc3-next-20250625 #1 PREEMPT 
[    7.319597] Hardware name: Thundercomm Dragonboard 845c (DT)
[    7.325312] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    7.332338] pc : ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom]
[    7.338071] lr : ufshcd_setup_clocks+0x68/0x4c8
[    7.342655] sp : ffff800081353640
[    7.346002] x29: ffff800081353640 x28: 0000000000000001 x27: ffff00008161b270
[    7.353208] x26: ffff00008161b2a0 x25: ffff00008161a870 x24: 0000000000000000
[    7.360413] x23: ffff00008161b280 x22: ffff00008161b2a0 x21: 0000000000000000
[    7.367618] x20: ffffdc676126fa98 x19: ffff00008161a870 x18: 0000000000000000
[    7.374821] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000100
[    7.382024] x14: ffffffffffffffff x13: 0000000000000030 x12: 0101010101010101
[    7.389229] x11: ffff000084db0e18 x10: 0000000000000000 x9 : ffffdc675f3dc858
[    7.396433] x8 : ffff8000813534b8 x7 : fefefefefefefefe x6 : 0000000000000001
[    7.403637] x5 : ffffffffffffffc8 x4 : 00000000c0000000 x3 : ffffdc66ece30058
[    7.410841] x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff00008161a870
[    7.418045] Call trace:
[    7.420523]  ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom] (P)
[    7.426246]  ufshcd_setup_clocks+0x68/0x4c8
[    7.430477]  ufshcd_init+0x278/0xff8
[    7.434098]  ufshcd_pltfrm_init+0x558/0x878
[    7.438334]  ufs_qcom_probe+0x28/0x68 [ufs_qcom]
[    7.443002]  platform_probe+0x70/0xd8
[    7.446713]  really_probe+0xc8/0x3a0
[    7.450334]  __driver_probe_device+0x84/0x170
[    7.454739]  driver_probe_device+0x44/0x120
[    7.458971]  __driver_attach+0xf8/0x208
[    7.462847]  bus_for_each_dev+0x90/0xf8
[    7.466726]  driver_attach+0x2c/0x40
[    7.470344]  bus_add_driver+0x118/0x248
[    7.474221]  driver_register+0x64/0x138
[    7.478100]  __platform_driver_register+0x2c/0x40
[    7.482850]  ufs_qcom_pltform_init+0x28/0xff8 [ufs_qcom]
[    7.488215]  do_one_initcall+0x60/0x290
[    7.492096]  do_init_module+0x60/0x268
[    7.495892]  load_module+0x1f30/0x2050
[    7.499685]  init_module_from_file+0x90/0xe0
[    7.504003]  __arm64_sys_finit_module+0x270/0x370
[    7.508753]  invoke_syscall+0x50/0x120
[    7.512545]  el0_svc_common.constprop.0+0x48/0xf0
[    7.517295]  do_el0_svc+0x24/0x38
[    7.520645]  el0_svc+0x3c/0x130
[    7.523828]  el0t_64_sync_handler+0x10c/0x138
[    7.528233]  el0t_64_sync+0x198/0x1a0
[    7.531943] Code: a90157f3 aa0003f3 f90013f6 f9405c15 (f94002b6) 
[    7.538099] ---[ end trace 0000000000000000 ]---

[    6.446472] Internal error: Oops: 0000000096000007 [#1]  SMP
[    6.446479] Modules linked in: spi_geni_qcom(+) videobuf2_common qcom_rng phy_qcom_qmp_usb(+) aux_bridge(+) gpi(+) typec qcrypto coresight_stm phy_qcom_qmp_ufs cfg80211(+) stm_core ufs_qcom(+) qrtr phy_qcom_qmp_pcie rfkill lmh slim_qcom_ngd_ctrl icc_osm_l3 qcom_q6v5_pas(+) slimbus qcom_pil_info qcom_q6v5 pdr_interface qcom_pdr_msg qcom_sysmon display_connector qcom_common drm_kms_helper qcom_wdt llcc_qcom qcom_glink_smem icc_bwmon mdt_loader qmi_helpers drm backlight socinfo rmtfs_mem
[    6.446581] CPU: 7 UID: 0 PID: 357 Comm: (udev-worker) Not tainted 6.16.0-rc3-next-20250625 #1 PREEMPT 
[    6.446591] Hardware name: Thundercomm Dragonboard 845c (DT)
[    6.446596] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.446603] pc : ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom]
[    6.446621] lr : ufshcd_setup_clocks+0x68/0x4c8
[    6.446637] sp : ffff8000860ef660
[    6.446640] x29: ffff8000860ef660 x28: 0000000000000001 x27: ffff000080b05270
[    6.446652] x26: ffff000080b052a0 x25: ffff000080b04870 x24: 0000000000000000
[    6.446663] x23: ffff000080b05280 x22: ffff000080b052a0 x21: 0000000000000000
[    6.446673] x20: ffffb2d6cd2a3a88 x19: ffff000080b04870 x18: ffffffdfc0244cc0
[    6.446684] x17: 000000040044ffff x16: 0000000000000100 x15: 0000000000000000
[    6.446695] x14: ffffffffffffffff x13: 0000000000000030 x12: 0101010101010101
[    6.446706] x11: ffff000082d85b18 x10: 0000000000000000 x9 : ffffb2d6cb1c25a8
[    6.446717] x8 : ffff8000860ef4d8 x7 : fefefefefefefefe x6 : 0000000000000001
[    6.446727] x5 : ffffffffffffffc8 x4 : 00000000c0000000 x3 : ffffb2d65aa81058
[    6.446737] x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff000080b04870
[    6.446748] Call trace:
[    6.446752]  ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom] (P)
[    6.446767]  ufshcd_setup_clocks+0x68/0x4c8
[    6.446778]  ufshcd_init+0x278/0xff8
[    6.446786]  ufshcd_pltfrm_init+0x558/0x878
[    6.446796]  ufs_qcom_probe+0x28/0x68 [ufs_qcom]
[    6.446808]  platform_probe+0x70/0xd8
[    6.446819]  really_probe+0xc8/0x3a0
[    6.446826]  __driver_probe_device+0x84/0x170
[    6.446834]  driver_probe_device+0x44/0x120
[    6.446841]  __driver_attach+0xf8/0x208
[    6.446848]  bus_for_each_dev+0x90/0xf8
[    6.446855]  driver_attach+0x2c/0x40
[    6.446861]  bus_add_driver+0x118/0x248
[    6.446868]  driver_register+0x64/0x138
[    6.446876]  __platform_driver_register+0x2c/0x40
[    6.446884]  ufs_qcom_pltform_init+0x28/0xfff8 [ufs_qcom]
[    6.446897]  do_one_initcall+0x60/0x290
[    6.446906]  do_init_module+0x60/0x268
[    6.446915]  load_module+0x1fa4/0x2098
[    6.446923]  init_module_from_file+0x90/0xe0
[    6.446931]  __arm64_sys_finit_module+0x270/0x370
[    6.446939]  invoke_syscall.constprop.0+0x58/0xf8
[    6.446951]  do_el0_svc+0x48/0xd8
[    6.446961]  el0_svc+0x44/0x190
[    6.446971]  el0t_64_sync_handler+0x10c/0x138
[    6.446979]  el0t_64_sync+0x198/0x1a0
[    6.446989] Code: a90157f3 aa0003f3 f90013f6 f9405c15 (f94002b6) 
[    6.446995] ---[ end trace 0000000000000000 ]---

[    5.588055] Internal error: Oops: 0000000096000007 [#1]  SMP
[    5.588061] Modules linked in: qrtr(+) slim_qcom_ngd_ctrl(+) cfg80211(+) slimbus phy_qcom_qmp_pcie pdr_interface qcom_q6v5_pas(+) phy_qcom_qmp_ufs ufs_qcom(+) icc_osm_l3 qcom_pdr_msg qcom_pil_info qcom_wdt qcom_q6v5 qcom_sysmon qcom_common rfkill lmh llcc_qcom icc_bwmon display_connector qcom_glink_smem mdt_loader drm_kms_helper qmi_helpers drm backlight socinfo rmtfs_mem
[    5.588134] CPU: 3 UID: 0 PID: 371 Comm: (udev-worker) Not tainted 6.16.0-rc3-next-20250625 #1 PREEMPT 
[    5.588142] Hardware name: Thundercomm Dragonboard 845c (DT)
[    5.588146] pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    5.588152] pc : ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom]
[    5.588167] lr : ufshcd_setup_clocks+0x68/0x4c8
[    5.588182] sp : ffff80008494f660
[    5.588185] x29: ffff80008494f660 x28: 0000000000000001 x27: ffff000088843270
[    5.588194] x26: ffff0000888432a0 x25: ffff000088842870 x24: 0000000000000000
[    5.588204] x23: ffff000088843280 x22: ffff0000888432a0 x21: 0000000000000000
[    5.588213] x20: ffffdf49806a3a88 x19: ffff000088842870 x18: 0000000000000000
[    5.588223] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[    5.588232] x14: ffffffffffffffff x13: 0000000000000030 x12: 0101010101010101
[    5.588241] x11: ffff000083500f18 x10: 0000000000000000 x9 : ffffdf497e5c25a8
[    5.588250] x8 : ffff80008494f4d8 x7 : fefefefefefefefe x6 : 0000000000000001
[    5.588260] x5 : ffffffffffffffc8 x4 : 00000000c0000000 x3 : ffffdf4963131058
[    5.588268] x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff000088842870
[    5.588277] Call trace:
[    5.588281]  ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom] (P)
[    5.588294]  ufshcd_setup_clocks+0x68/0x4c8
[    5.588302]  ufshcd_init+0x278/0xff8
[    5.588310]  ufshcd_pltfrm_init+0x558/0x878
[    5.588320]  ufs_qcom_probe+0x28/0x68 [ufs_qcom]
[    5.588330]  platform_probe+0x70/0xd8
[    5.588341]  really_probe+0xc8/0x3a0
[    5.588347]  __driver_probe_device+0x84/0x170
[    5.588355]  driver_probe_device+0x44/0x120
[    5.588361]  __driver_attach+0xf8/0x208
[    5.588367]  bus_for_each_dev+0x90/0xf8
[    5.588373]  driver_attach+0x2c/0x40
[    5.588379]  bus_add_driver+0x118/0x248
[    5.588384]  driver_register+0x64/0x138
[    5.588391]  __platform_driver_register+0x2c/0x40
[    5.588397]  ufs_qcom_pltform_init+0x28/0xfff8 [ufs_qcom]
[    5.588408]  do_one_initcall+0x60/0x290
[    5.588417]  do_init_module+0x60/0x268
[    5.588426]  load_module+0x1fa4/0x2098
[    5.588433]  init_module_from_file+0x90/0xe0
[    5.588439]  __arm64_sys_finit_module+0x270/0x370
[    5.588446]  invoke_syscall.constprop.0+0x58/0xf8
[    5.588456]  do_el0_svc+0x48/0xd8
[    5.588463]  el0_svc+0x44/0x190
[    5.588473]  el0t_64_sync_handler+0x10c/0x138
[    5.588480]  el0t_64_sync+0x198/0x1a0
[    5.588489] Code: a90157f3 aa0003f3 f90013f6 f9405c15 (f94002b6) 
[    5.588494] ---[ end trace 0000000000000000 ]---

[    6.346015] Internal error: Oops: 0000000096000007 [#1]  SMP
[    6.353591] qcom-pcie 1c08000.pcie: supply vddpe-3v3 not found, using dummy regulator
[    6.359000] Modules linked in: videobuf2_common drm_client_lib i2c_qcom_geni(+) camcc_sdm845(+) gpi qcom_rng spi_geni_qcom(+) phy_qcom_qmp_usb cfg80211(+) coresight_stm(+) qcom_q6v5_mss qrtr qcrypto stm_core icc_osm_l3 slim_qcom_ngd_ctrl rfkill ufs_qcom(+) qcom_wdt slimbus qcom_q6v5_pas(+) qcom_pil_info phy_qcom_qmp_ufs qcom_q6v5 pdr_interface phy_qcom_qmp_pcie qcom_pdr_msg qcom_sysmon llcc_qcom qcom_common qcom_glink_smem lmh mdt_loader display_connector icc_bwmon qmi_helpers drm_kms_helper drm backlight socinfo rmtfs_mem
[    6.367799] qcom-pcie 1c00000.pcie: host bridge /soc@0/pcie@1c00000 ranges:
[    6.372264] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    6.373079] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[    6.373217] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    6.373234] cfg80211: failed to load regulatory.db
[    6.413642] CPU: 0 UID: 0 PID: 376 Comm: (udev-worker) Not tainted 6.16.0-rc3-next-20250625 #1 PREEMPT 
[    6.413650] Hardware name: Thundercomm Dragonboard 845c (DT)
[    6.413654] pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.413660] pc : ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom]
[    6.421048] qcom-pcie 1c08000.pcie: host bridge /soc@0/pcie@1c08000 ranges:
[    6.426381] lr : ufshcd_setup_clocks+0x68/0x4c8
[    6.430376] coresight stm0: STM32 initialized
[    6.433775] qcom-pcie 1c08000.pcie:       IO 0x0040200000..0x00402fffff -> 0x0000000000
[    6.442343] sp : ffff800084acf660
[    6.442346] x29: ffff800084acf660 x28: 0000000000000001 x27: ffff000091681270
[    6.447235] qcom-pcie 1c08000.pcie:      MEM 0x0040300000..0x005fffffff -> 0x0040300000
[    6.456636] 
[    6.456639] x26: ffff0000916812a0 x25: ffff000091680870 x24: 0000000000000000
[    6.462611] qcom-pcie 1c00000.pcie:       IO 0x0060200000..0x00602fffff -> 0x0000000000
[    6.469363] 
[    6.469365] x23: ffff000091681280 x22: ffff0000916812a0 x21: 0000000000000000
[    6.469375] x20: ffffde3449aa3a88 x19: ffff000091680870
[    6.475136] qcom-pcie 1c00000.pcie:      MEM 0x0060300000..0x0060ffffff -> 0x0060300000
[    6.482100]  x18: 0000000000000000
[    6.482105] x17: 20646e6966206f74 x16: 20656c62616e5520 x15: 0000000000000000
[    6.567316] x14: ffffffffffffffff x13: 0000000000000030 x12: 0101010101010101
[    6.574519] x11: ffff000089611518 x10: 0000000000000000 x9 : ffffde34479c25a8
[    6.581725] x8 : ffff800084acf4d8 x7 : fefefefefefefefe x6 : 0000000000000001
[    6.588930] x5 : ffffffffffffffc8 x4 : 00000000c0000000 x3 : ffffde33d4041058
[    6.596134] x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff000091680870
[    6.603337] Call trace:
[    6.605813]  ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom] (P)
[    6.611536]  ufshcd_setup_clocks+0x68/0x4c8
[    6.615769]  ufshcd_init+0x278/0xff8
[    6.619390]  ufshcd_pltfrm_init+0x558/0x878
[    6.623624]  ufs_qcom_probe+0x28/0x68 [ufs_qcom]
[    6.628292]  platform_probe+0x70/0xd8
[    6.632001]  really_probe+0xc8/0x3a0
[    6.635620]  __driver_probe_device+0x84/0x170
[    6.640025]  driver_probe_device+0x44/0x120
[    6.644257]  __driver_attach+0xf8/0x208
[    6.648135]  bus_for_each_dev+0x90/0xf8
[    6.652012]  driver_attach+0x2c/0x40
[    6.655631]  bus_add_driver+0x118/0x248
[    6.659507]  driver_register+0x64/0x138
[    6.663385]  __platform_driver_register+0x2c/0x40
[    6.668134]  ufs_qcom_pltform_init+0x28/0xfff8 [ufs_qcom]
[    6.673596]  do_one_initcall+0x60/0x290
[    6.677481]  do_init_module+0x60/0x268
[    6.681274]  load_module+0x1fa4/0x2098
[    6.685066]  init_module_from_file+0x90/0xe0
[    6.689385]  __arm64_sys_finit_module+0x270/0x370
[    6.694141]  invoke_syscall.constprop.0+0x58/0xf8
[    6.698896]  do_el0_svc+0x48/0xd8
[    6.702249]  el0_svc+0x44/0x190
[    6.705435]  el0t_64_sync_handler+0x10c/0x138
[    6.709836]  el0t_64_sync+0x198/0x1a0
[    6.713546] Code: a90157f3 aa0003f3 f90013f6 f9405c15 (f94002b6) 
[    6.719701] ---[ end trace 0000000000000000 ]---

[    6.320414] Internal error: Oops: 0000000096000007 [#1]  SMP
[    6.320420] Modules linked in: pwrseq_core(+) venus_core(+) drm_client_lib(+) reset_qcom_pdc camcc_sdm845(+) i2c_qcom_geni(+) v4l2_mem2mem spi_geni_qcom cfg80211(+) qcom_rng gpi(+) videobuf2_v4l2 videobuf2_common typec phy_qcom_qmp_usb qcom_q6v5_mss ufs_qcom(+) phy_qcom_qmp_pcie phy_qcom_qmp_ufs coresight_stm stm_core qrtr qcrypto rfkill qcom_q6v5_pas(+) qcom_pil_info qcom_q6v5 qcom_wdt slim_qcom_ngd_ctrl lmh slimbus pdr_interface icc_osm_l3 qcom_pdr_msg qcom_sysmon llcc_qcom icc_bwmon display_connector qcom_common qcom_glink_smem mdt_loader qmi_helpers drm_kms_helper drm backlight socinfo rmtfs_mem
[    6.320520] CPU: 3 UID: 0 PID: 399 Comm: (udev-worker) Not tainted 6.16.0-rc3-next-20250625 #1 PREEMPT 
[    6.320527] Hardware name: Thundercomm Dragonboard 845c (DT)
[    6.320531] pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.320536] pc : ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom]
[    6.320551] lr : ufshcd_setup_clocks+0x68/0x4c8
[    6.320567] sp : ffffc000813fb660
[    6.320569] x29: ffffc000813fb660 x28: 0000000000000001 x27: ffff80008df21270
[    6.320578] x26: ffff80008df212a0 x25: ffff80008df20870 x24: 0000000000000000
[    6.320587] x23: ffff80008df21280 x22: ffff80008df212a0 x21: 0000000000000000
[    6.320595] x20: ffffd92c3dacfa90 x19: ffff80008df20870 x18: 0000000000000000
[    6.320603] x17: 5453595342555300 x16: 305f666d745f6973 x15: 0000000000000000
[    6.320612] x14: ffffffffffffffff x13: 0000000000000030 x12: 0101010101010101
[    6.320620] x11: ffff800081ff9218 x10: 0000000000000000 x9 : ffffd92c3bbc15c8
[    6.320628] x8 : ffffc000813fb4d8 x7 : fefefefefefefefe x6 : 0000000000000001
[    6.320636] x5 : ffffffffffffffc8 x4 : 00000000c0000000 x3 : ffffd92c2c565058
[    6.320644] x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff80008df20870
[    6.320653] Call trace:
[    6.320656]  ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom] (P)
[    6.320668]  ufshcd_setup_clocks+0x68/0x4c8
[    6.320676]  ufshcd_init+0x278/0xff8
[    6.320683]  ufshcd_pltfrm_init+0x558/0x878
[    6.320691]  ufs_qcom_probe+0x28/0x68 [ufs_qcom]
[    6.320701]  platform_probe+0x70/0xd8
[    6.320712]  really_probe+0xc8/0x3a0
[    6.320718]  __driver_probe_device+0x84/0x170
[    6.320725]  driver_probe_device+0x44/0x120
[    6.320730]  __driver_attach+0xf8/0x208
[    6.320736]  bus_for_each_dev+0x90/0xf8
[    6.320742]  driver_attach+0x2c/0x40
[    6.320748]  bus_add_driver+0x118/0x248
[    6.320753]  driver_register+0x64/0x138
[    6.320760]  __platform_driver_register+0x2c/0x40
[    6.320767]  ufs_qcom_pltform_init+0x28/0x3ff8 [ufs_qcom]
[    6.320777]  do_one_initcall+0x60/0x290
[    6.320786]  do_init_module+0x60/0x268
[    6.320795]  load_module+0x1fa4/0x2098
[    6.320801]  init_module_from_file+0x90/0xe0
[    6.320807]  __arm64_sys_finit_module+0x270/0x370
[    6.320813]  invoke_syscall.constprop.0+0x58/0xf8
[    6.320822]  do_el0_svc+0x48/0xd8
[    6.320829]  el0_svc+0x44/0x190
[    6.320838]  el0t_64_sync_handler+0x10c/0x138
[    6.320844]  el0t_64_sync+0x198/0x1a0
[    6.320853] Code: a90157f3 aa0003f3 f90013f6 f9405c15 (f94002b6) 
[    6.320858] ---[ end trace 0000000000000000 ]---

[    6.641667] Internal error: Oops: 0000000096000006 [#1]  SMP
[    6.643200] cpufreq: cpufreq_policy_online: CPU4: Running at unlisted initial frequency: 2995200 kHz, changing to: 2649600 kHz
[    6.643283] remoteproc remoteproc0: adsp is available
[    6.643349] remoteproc remoteproc0: Direct firmware load for qcom/sdm845/adsp.mbn failed with error -2
[    6.643356] remoteproc remoteproc0: powering up adsp
[    6.643373] remoteproc remoteproc0: Direct firmware load for qcom/sdm845/adsp.mbn failed with error -2
[    6.643378] remoteproc remoteproc0: request_firmware failed: -2
[    6.645303] remoteproc remoteproc1: cdsp is available
[    6.645361] remoteproc remoteproc1: Direct firmware load for qcom/sdm845/cdsp.mbn failed with error -2
[    6.645367] remoteproc remoteproc1: powering up cdsp
[    6.645383] remoteproc remoteproc1: Direct firmware load for qcom/sdm845/cdsp.mbn failed with error -2
[    6.645387] remoteproc remoteproc1: request_firmware failed: -2
[    6.646617] remoteproc remoteproc2: slpi is available
[    6.647378] Modules linked in: i2c_qcom_geni(+) gpi(+) camcc_sdm845(+) aux_bridge phy_qcom_qmp_usb coresight_stm venus_core(+) qcom_rng qcom_q6v5_mss typec
[    6.680822] remoteproc remoteproc2: Direct firmware load for qcom/sdm845/Thundercomm/db845c/slpi.mbn failed with error -2
[    6.687730]  v4l2_mem2mem qcom_q6v5_pas videobuf2_v4l2 qcrypto
[    6.693710] remoteproc remoteproc2: powering up slpi
[    6.698790]  qrtr videobuf2_common stm_core
[    6.708184] remoteproc remoteproc2: Direct firmware load for qcom/sdm845/Thundercomm/db845c/slpi.mbn failed with error -2
[    6.713167]  spi_geni_qcom slim_qcom_ngd_ctrl qcom_pil_info
[    6.722547] remoteproc remoteproc2: request_firmware failed: -2
[    6.728511]  cfg80211 phy_qcom_qmp_ufs phy_qcom_qmp_pcie ufs_qcom(+) slimbus icc_osm_l3 lmh qcom_q6v5 pdr_interface rfkill qcom_pdr_msg qcom_wdt display_connector qcom_sysmon drm_kms_helper qcom_common qcom_glink_smem mdt_loader icc_bwmon llcc_qcom qmi_helpers drm socinfo backlight rmtfs_mem
[    6.822540] CPU: 2 UID: 0 PID: 374 Comm: (udev-worker) Not tainted 6.16.0-rc3-next-20250625 #1 PREEMPT 
[    6.832015] Hardware name: Thundercomm Dragonboard 845c (DT)
[    6.837726] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.844747] pc : ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom]
[    6.850474] lr : ufshcd_setup_clocks+0x68/0x4c8
[    6.855055] sp : ffff80008149b640
[    6.858411] x29: ffff80008149b640 x28: 0000000000000001 x27: ffff00008a265270
[    6.865622] x26: ffff00008a2652a0 x25: ffff00008a264870 x24: 0000000000000000
[    6.872833] x23: ffff00008a265280 x22: ffff00008a2652a0 x21: 0000000000000000
[    6.880034] x20: ffffa004e786fa98 x19: ffff00008a264870 x18: 0000000000000000
[    6.887236] x17: 20646e6966206f74 x16: 20656c62616e5520 x15: 0000000000000100
[    6.894446] x14: ffffffffffffffff x13: 0000000000000030 x12: 0101010101010101
[    6.901656] x11: ffff000080ce1418 x10: 0000000000000000 x9 : ffffa004e59dc858
[    6.908865] x8 : ffff80008149b4b8 x7 : fefefefefefefefe x6 : 0000000000000001
[    6.916067] x5 : ffffffffffffffc8 x4 : 00000000c0000000 x3 : ffffa004c918a058
[    6.923266] x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff00008a264870
[    6.930476] Call trace:
[    6.932951]  ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom] (P)
[    6.938672]  ufshcd_setup_clocks+0x68/0x4c8
[    6.942902]  ufshcd_init+0x278/0xff8
[    6.946522]  ufshcd_pltfrm_init+0x558/0x878
[    6.950751]  ufs_qcom_probe+0x28/0x68 [ufs_qcom]
[    6.955415]  platform_probe+0x70/0xd8
[    6.959125]  really_probe+0xc8/0x3a0
[    6.962743]  __driver_probe_device+0x84/0x170
[    6.967144]  driver_probe_device+0x44/0x120
[    6.971374]  __driver_attach+0xf8/0x208
[    6.975249]  bus_for_each_dev+0x90/0xf8
[    6.979124]  driver_attach+0x2c/0x40
[    6.982742]  bus_add_driver+0x118/0x248
[    6.986617]  driver_register+0x64/0x138
[    6.990493]  __platform_driver_register+0x2c/0x40
[    6.995250]  ufs_qcom_pltform_init+0x28/0xff8 [ufs_qcom]
[    7.000618]  do_one_initcall+0x60/0x290
[    7.004496]  do_init_module+0x60/0x268
[    7.008289]  load_module+0x1f30/0x2050
[    7.012080]  init_module_from_file+0x90/0xe0
[    7.016393]  __arm64_sys_finit_module+0x270/0x370
[    7.021149]  invoke_syscall+0x50/0x120
[    7.024939]  el0_svc_common.constprop.0+0x48/0xf0
[    7.029696]  do_el0_svc+0x24/0x38
[    7.033044]  el0_svc+0x3c/0x130
[    7.036225]  el0t_64_sync_handler+0x10c/0x138
[    7.040628]  el0t_64_sync+0x198/0x1a0
[    7.044335] Code: a90157f3 aa0003f3 f90013f6 f9405c15 (f94002b6) 
[    7.050490] ---[ end trace 0000000000000000 ]---

[    6.594667] Internal error: Oops: 0000000096000006 [#1]  SMP
[    6.594671] Modules linked in: pwrseq_core gpi typec spi_geni_qcom phy_qcom_qmp_usb qrtr qcom_rng stm_core icc_osm_l3 phy_qcom_qmp_ufs qcrypto qcom_q6v5_mss qcom_q6v5_pas(+)
[    6.600051] cpu cpu0: EM: OPP:576000 is inefficient
[    6.603126]  slim_qcom_ngd_ctrl(+)
[    6.606295] cpu cpu0: EM: OPP:480000 is inefficient
[    6.611209]  ufs_qcom(+) lmh slimbus pdr_interface
[    6.614126] cpu cpu0: EM: OPP:403200 is inefficient
[    6.618510]  rfkill phy_qcom_qmp_pcie qcom_pdr_msg qcom_pil_info qcom_wdt
[    6.624048] cpu cpu0: EM: OPP:300000 is inefficient
[    6.629137]  llcc_qcom display_connector qcom_q6v5 qcom_sysmon drm_kms_helper
[    6.640810] qcom-pcie 1c00000.pcie: supply vdda not found, using dummy regulator
[    6.640975]  icc_bwmon drm
[    6.648149] qcom-pcie 1c00000.pcie: host bridge /soc@0/pcie@1c00000 ranges:
[    6.654215]  backlight qcom_common qcom_glink_smem mdt_loader qmi_helpers socinfo rmtfs_mem
[    6.654225] CPU: 4 UID: 0 PID: 367 Comm: (udev-worker) Not tainted 6.16.0-rc3-next-20250625 #1 PREEMPT 
[    6.659610] qcom-pcie 1c00000.pcie:       IO 0x0060200000..0x00602fffff -> 0x0000000000
[    6.665277] Hardware name: Thundercomm Dragonboard 845c (DT)
[    6.665279] pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.665282] pc : ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom]
[    6.680874] qcom-pcie 1c00000.pcie:      MEM 0x0060300000..0x0060ffffff -> 0x0060300000
[    6.681657] qcom-pcie 1c08000.pcie: iATU: unroll F, 8 ob, 8 ib, align 4K, limit 1024G
[    6.682035] qcom-pcie 1c08000.pcie: PCI host bridge to bus 0001:00
[    6.682042] pci_bus 0001:00: root bus resource [bus 00-ff]
[    6.682047] pci_bus 0001:00: root bus resource [io  0x0000-0xfffff]
[    6.682050] pci_bus 0001:00: root bus resource [mem 0x40300000-0x5fffffff]
[    6.682271] pci 0001:00:00.0: [17cb:0107] type 01 class 0x060400 PCIe Root Port
[    6.682292] pci 0001:00:00.0: BAR 0 [mem 0x00000000-0x00000fff]
[    6.682298] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[    6.682306] pci 0001:00:00.0:   bridge window [io  0x0000-0x0fff]
[    6.682311] pci 0001:00:00.0:   bridge window [mem 0x00000000-0x000fffff]
[    6.682320] pci 0001:00:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[    6.682387] pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
[    6.682718] pci 0001:00:00.0: Adding to iommu group 16
[    6.684990] pci 0001:00:00.0: BAR 0 [mem 0x40300000-0x40300fff]: assigned
[    6.684998] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[    6.685008] pci_bus 0001:00: resource 4 [io  0x0000-0xfffff]
[    6.685011] pci_bus 0001:00: resource 5 [mem 0x40300000-0x5fffffff]
[    6.685765] lr : ufshcd_setup_clocks+0x68/0x4c8
[    6.686349] pcieport 0001:00:00.0: PME: Signaling with IRQ 157
[    6.686707] pcieport 0001:00:00.0: AER: enabled with IRQ 157
[    6.801930] qcom-pcie 1c00000.pcie: iATU: unroll F, 32 ob, 8 ib, align 4K, limit 4G
[    6.806553] sp : ffff800080fe3640
[    6.806554] x29: ffff800080fe3640 x28: 0000000000000001 x27: ffff00008b399270
[    6.806559] x26: ffff00008b3992a0 x25: ffff00008b398870 x24: 0000000000000000
[    6.806562] x23: ffff00008b399280 x22: ffff00008b3992a0 x21: 0000000000000000
[    6.812250] qcom-pcie 1c00000.pcie: PCI host bridge to bus 0000:00
[    6.818400] 
[    6.818401] x20: ffffa249f4c6fa98 x19: ffff00008b398870 x18: 0000000000000000
[    6.818405] x17: 30203e2d20666666 x16: 6666323034303078
[    6.825342] pci_bus 0000:00: root bus resource [bus 00-ff]
[    6.832698]  x15: 0000000000000100
[    6.832700] x14: ffffffffffffffff x13: 0000000000000030 x12: 0101010101010101
[    6.832703] x11: ffff000080da5918
[    6.838673] pci_bus 0000:00: root bus resource [io  0x100000-0x1fffff] (bus address [0x0000-0xfffff])
[    6.843933]  x10: 0000000000000000 x9 : ffffa249f2ddc858
[    6.843936] x8 : ffff800080fe34b8 x7 : fefefefefefefefe x6 : 0000000000000001
[    6.850078] pci_bus 0000:00: root bus resource [mem 0x60300000-0x60ffffff]
[    6.856913] 
[    6.856914] x5 : ffffffffffffffc8 x4 : 00000000c0000000 x3 : ffffa24992f4e058
[    6.856918] x2 : 0000000000000000 x1 : 0000000000000001
[    6.864939] pci 0000:00:00.0: [17cb:0106] type 01 class 0x060400 PCIe Root Port
[    6.870848]  x0 : ffff00008b398870
[    6.870850] Call trace:
[    6.870852]  ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom] (P)
[    6.876048] pci 0000:00:00.0: BAR 0 [mem 0x00000000-0x00000fff]
[    6.882861]  ufshcd_setup_clocks+0x68/0x4c8
[    6.882863]  ufshcd_init+0x278/0xff8
[    6.888145] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    6.893827]  ufshcd_pltfrm_init+0x558/0x878
[    6.893832]  ufs_qcom_probe+0x28/0x68 [ufs_qcom]
[    6.900170] pci 0000:00:00.0:   bridge window [io  0x100000-0x100fff]
[    6.904708]  platform_probe+0x70/0xd8
[    6.910600] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff]
[    6.916297]  really_probe+0xc8/0x3a0
[    6.916301]  __driver_probe_device+0x84/0x170
[    6.924022] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[    6.927353]  driver_probe_device+0x44/0x120
[    6.934608] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[    6.941721]  __driver_attach+0xf8/0x208
[    6.941723]  bus_for_each_dev+0x90/0xf8
[    6.941725]  driver_attach+0x2c/0x40
[    6.949227] pci 0000:00:00.0: Adding to iommu group 17
[    6.955137]  bus_add_driver+0x118/0x248
[    6.955139]  driver_register+0x64/0x138
[    6.955142]  __platform_driver_register+0x2c/0x40
[    6.955145]  ufs_qcom_pltform_init+0x28/0xff8 [ufs_qcom]
[    6.959133] pci 0000:01:00.0: [1912:0014] type 00 class 0x0c0330 PCIe Endpoint
[    6.963833]  do_one_initcall+0x60/0x290
[    6.963840]  do_init_module+0x60/0x268
[    6.969430] pci 0000:01:00.0: BAR 0 [mem 0x00000000-0x00001fff 64bit]
[    6.974632]  load_module+0x1f30/0x2050
[    6.974635]  init_module_from_file+0x90/0xe0
[    6.978606] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    6.985262]  __arm64_sys_finit_module+0x270/0x370
[    6.985266]  invoke_syscall+0x50/0x120
[    6.989159] pci 0000:01:00.0: Adding to iommu group 17
[    6.997894]  el0_svc_common.constprop.0+0x48/0xf0
[    6.997897]  do_el0_svc+0x24/0x38
[    6.997899]  el0_svc+0x3c/0x130
[    7.007892] pci 0000:00:00.0: bridge window [mem 0x60300000-0x603fffff]: assigned
[    7.010437]  el0t_64_sync_handler+0x10c/0x138
[    7.017372] pci 0000:00:00.0: BAR 0 [mem 0x60400000-0x60400fff]: assigned
[    7.018874]  el0t_64_sync+0x198/0x1a0
[    7.026069] pci 0000:01:00.0: BAR 0 [mem 0x60300000-0x60301fff 64bit]: assigned
[    7.031329] Code: a90157f3 aa0003f3 f90013f6 f9405c15 (f94002b6) 
[    7.031332] ---[ end trace 0000000000000000 ]---

[    6.445534] Internal error: Oops: 0000000096000006 [#1]  SMP
[    6.445541] Modules linked in: qrtr cfg80211(+) qcom_q6v5_pas(+) slimbus rfkill ufs_qcom(+) qcom_wdt phy_qcom_qmp_ufs lmh qcom_pil_info pdr_interface qcom_q6v5 qcom_pdr_msg phy_qcom_qmp_pcie icc_osm_l3 display_connector drm_kms_helper qcom_sysmon icc_bwmon qcom_common qcom_glink_smem llcc_qcom mdt_loader qmi_helpers drm backlight socinfo rmtfs_mem
[    6.445610] CPU: 2 UID: 0 PID: 397 Comm: (udev-worker) Not tainted 6.16.0-rc3-next-20250625 #1 PREEMPT 
[    6.445619] Hardware name: Thundercomm Dragonboard 845c (DT)
[    6.445623] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.445630] pc : ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom]
[    6.445646] lr : ufshcd_setup_clocks+0x68/0x4c8
[    6.445659] sp : ffff800081283640
[    6.445662] x29: ffff800081283640 x28: 0000000000000001 x27: ffff000089ec9270
[    6.445672] x26: ffff000089ec92a0 x25: ffff000089ec8870 x24: 0000000000000000
[    6.445681] x23: ffff000089ec9280 x22: ffff000089ec92a0 x21: 0000000000000000
[    6.445690] x20: ffffc72c6ba6fa98 x19: ffff000089ec8870 x18: 0000000000000000
[    6.445699] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[    6.445707] x14: ffffffffffffffff x13: 0000000000000030 x12: 0101010101010101
[    6.445717] x11: ffff000080ca7118 x10: 0000000000000000 x9 : ffffc72c69bdc858
[    6.445726] x8 : ffff8000812834b8 x7 : fefefefefefefefe x6 : 0000000000000001
[    6.445734] x5 : ffffffffffffffc8 x4 : 00000000c0000000 x3 : ffffc72bfa26c058
[    6.445743] x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff000089ec8870
[    6.445753] Call trace:
[    6.445757]  ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom] (P)
[    6.445770]  ufshcd_setup_clocks+0x68/0x4c8
[    6.445776]  ufshcd_init+0x278/0xff8
[    6.445785]  ufshcd_pltfrm_init+0x558/0x878
[    6.445794]  ufs_qcom_probe+0x28/0x68 [ufs_qcom]
[    6.445804]  platform_probe+0x70/0xd8
[    6.445815]  really_probe+0xc8/0x3a0
[    6.445822]  __driver_probe_device+0x84/0x170
[    6.445829]  driver_probe_device+0x44/0x120
[    6.445835]  __driver_attach+0xf8/0x208
[    6.445841]  bus_for_each_dev+0x90/0xf8
[    6.445848]  driver_attach+0x2c/0x40
[    6.445854]  bus_add_driver+0x118/0x248
[    6.445860]  driver_register+0x64/0x138
[    6.445866]  __platform_driver_register+0x2c/0x40
[    6.445873]  ufs_qcom_pltform_init+0x28/0xff8 [ufs_qcom]
[    6.445884]  do_one_initcall+0x60/0x290
[    6.445893]  do_init_module+0x60/0x268
[    6.445902]  load_module+0x1f30/0x2050
[    6.445909]  init_module_from_file+0x90/0xe0
[    6.445916]  __arm64_sys_finit_module+0x270/0x370
[    6.445923]  invoke_syscall+0x50/0x120
[    6.445930]  el0_svc_common.constprop.0+0x48/0xf0
[    6.445936]  do_el0_svc+0x24/0x38
[    6.445941]  el0_svc+0x3c/0x130
[    6.445952]  el0t_64_sync_handler+0x10c/0x138
[    6.445960]  el0t_64_sync+0x198/0x1a0
[    6.445971] Code: a90157f3 aa0003f3 f90013f6 f9405c15 (f94002b6) 
[    6.445976] ---[ end trace 0000000000000000 ]---

[    6.492124] Internal error: Oops: 0000000096000006 [#1]  SMP
[    6.492131] Modules linked in: qcom_q6v5_mss pdr_interface phy_qcom_qmp_ufs icc_osm_l3 qcom_pdr_msg qcrypto ufs_qcom(+) lmh qcom_wdt cfg80211(+) phy_qcom_qmp_pcie rfkill display_connector drm_kms_helper qcom_q6v5_pas(+) icc_bwmon llcc_qcom qcom_pil_info qcom_q6v5 qcom_sysmon qcom_common qcom_glink_smem mdt_loader drm qmi_helpers backlight socinfo rmtfs_mem
[    6.492211] CPU: 5 UID: 0 PID: 377 Comm: (udev-worker) Not tainted 6.16.0-rc3-next-20250625 #1 PREEMPT 
[    6.492222] Hardware name: Thundercomm Dragonboard 845c (DT)
[    6.492226] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.492233] pc : ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom]
[    6.492251] lr : ufshcd_setup_clocks+0x68/0x4c8
[    6.492263] sp : ffff800080fcb640
[    6.492267] x29: ffff800080fcb640 x28: 0000000000000001 x27: ffff000085787270
[    6.492279] x26: ffff0000857872a0 x25: ffff000085786870 x24: 0000000000000000
[    6.492290] x23: ffff000085787280 x22: ffff0000857872a0 x21: 0000000000000000
[    6.492301] x20: ffffd8d75de6fa98 x19: ffff000085786870 x18: 0000000000000000
[    6.492312] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000100
[    6.492323] x14: ffffffffffffffff x13: 0000000000000030 x12: 0101010101010101
[    6.492334] x11: ffff0000813c5418 x10: 0000000000000000 x9 : ffffd8d75bfdc858
[    6.492345] x8 : ffff800080fcb4b8 x7 : fefefefefefefefe x6 : 0000000000000001
[    6.492355] x5 : ffffffffffffffc8 x4 : 00000000c0000000 x3 : ffffd8d6eb51d058
[    6.492366] x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff000085786870
[    6.492376] Call trace:
[    6.492381]  ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom] (P)
[    6.492396]  ufshcd_setup_clocks+0x68/0x4c8
[    6.492403]  ufshcd_init+0x278/0xff8
[    6.492413]  ufshcd_pltfrm_init+0x558/0x878
[    6.492424]  ufs_qcom_probe+0x28/0x68 [ufs_qcom]
[    6.492436]  platform_probe+0x70/0xd8
[    6.492448]  really_probe+0xc8/0x3a0
[    6.492456]  __driver_probe_device+0x84/0x170
[    6.492464]  driver_probe_device+0x44/0x120
[    6.492471]  __driver_attach+0xf8/0x208
[    6.492479]  bus_for_each_dev+0x90/0xf8
[    6.492485]  driver_attach+0x2c/0x40
[    6.492492]  bus_add_driver+0x118/0x248
[    6.492499]  driver_register+0x64/0x138
[    6.492506]  __platform_driver_register+0x2c/0x40
[    6.492515]  ufs_qcom_pltform_init+0x28/0xff8 [ufs_qcom]
[    6.492527]  do_one_initcall+0x60/0x290
[    6.492537]  do_init_module+0x60/0x268
[    6.492547]  load_module+0x1f30/0x2050
[    6.492556]  init_module_from_file+0x90/0xe0
[    6.492565]  __arm64_sys_finit_module+0x270/0x370
[    6.492574]  invoke_syscall+0x50/0x120
[    6.492581]  el0_svc_common.constprop.0+0x48/0xf0
[    6.492588]  do_el0_svc+0x24/0x38
[    6.492594]  el0_svc+0x3c/0x130
[    6.492606]  el0t_64_sync_handler+0x10c/0x138
[    6.492617]  el0t_64_sync+0x198/0x1a0
[    6.492627] Code: a90157f3 aa0003f3 f90013f6 f9405c15 (f94002b6) 
[    6.492633] ---[ end trace 0000000000000000 ]---
[    7.620178] Internal error: Oops: 0000000096000006 [#2]  SMP
[    7.620184] Modules linked in: can_dev snd_timer(+) ath10k_snoc(+) drm_dp_aux_bus(+) leds_qcom_lpg(+) drm_display_helper hci_uart(+) ath10k_core btqca qcom_pbs qcom_pon(+) qcom_camss qcom_spmi_adc5 videobuf2_dma_sg qcom_spmi_temp_alarm rtc_pm8xxx btbcm ath qcom_vadc_common led_class_multicolor qcom_stats cec camcc_sdm845 snd videobuf2_memops venus_core(+) soundcore drm_client_lib reset_qcom_pdc mac80211 v4l2_mem2mem phy_qcom_qmp_combo aux_bridge slim_qcom_ngd_ctrl videobuf2_v4l2 bluetooth coresight_stm slimbus i2c_qcom_geni videobuf2_common pwrseq_core spi_geni_qcom phy_qcom_qmp_usb gpi typec qcom_rng stm_core qrtr qcom_q6v5_mss pdr_interface phy_qcom_qmp_ufs icc_osm_l3 qcom_pdr_msg qcrypto ufs_qcom(+) lmh qcom_wdt cfg80211 phy_qcom_qmp_pcie rfkill display_connector drm_kms_helper qcom_q6v5_pas icc_bwmon llcc_qcom qcom_pil_info qcom_q6v5 qcom_sysmon qcom_common qcom_glink_smem mdt_loader drm qmi_helpers backlight socinfo rmtfs_mem
[    7.620339] CPU: 1 UID: 0 PID: 431 Comm: v4l_id Tainted: G      D             6.16.0-rc3-next-20250625 #1 PREEMPT 
[    7.620347] Tainted: [D]=DIE
[    7.620350] Hardware name: Thundercomm Dragonboard 845c (DT)
[    7.620353] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    7.620359] pc : camss_find_sensor_pad+0x2c/0x88 [qcom_camss]
[    7.620399] lr : camss_get_pixel_clock+0x20/0x78 [qcom_camss]
[    7.620428] sp : ffff80008400b8c0
[    7.620431] x29: ffff80008400b8c0 x28: 0000000000000000 x27: ffff80008400bc30
[    7.620440] x26: 0000000000000000 x25: 0000000000000000 x24: ffff80008400b918
[    7.620449] x23: ffff00008df431e0 x22: ffff00008df44e30 x21: ffff80008400b930
[    7.620458] x20: 0000000000000003 x19: 0000000000020001 x18: 0000000000000000
[    7.620466] x17: 3030336263613a31 x16: ffffd8d75bed7c80 x15: 706e65672f6b6e69
[    7.620474] x14: 0000000000000000 x13: 73736d61632e3030 x12: 30336263613a313a
[    7.620483] x11: 64706e65673a6470 x10: 6e65673a7265696c x9 : ffffd8d6eb962c28
[    7.620491] x8 : ffff80008400b938 x7 : fefefefefefefefe x6 : 0000000000000001
[    7.620499] x5 : ffff00008df444f0 x4 : 000000000fffffff x3 : ffff00008df443c0
[    7.620507] x2 : ffff00008df43900 x1 : ffff00008df44e30 x0 : 0000000000000000
[    7.620515] Call trace:
[    7.620520]  camss_find_sensor_pad+0x2c/0x88 [qcom_camss] (P)
[    7.620550]  camss_get_pixel_clock+0x20/0x78 [qcom_camss]
[    7.620578]  vfe_get+0xd4/0x540 [qcom_camss]
[    7.620607]  vfe_set_power+0x38/0x68 [qcom_camss]
[    7.620635]  pipeline_pm_power_one+0x14c/0x168
[    7.620649]  pipeline_pm_power+0x7c/0x110
[    7.620656]  v4l2_pipeline_pm_use+0x5c/0xa0
[    7.620664]  v4l2_pipeline_pm_get+0x1c/0x30
[    7.620671]  video_open+0x7c/0x100 [qcom_camss]
[    7.620699]  v4l2_open+0x84/0x130
[    7.620706]  chrdev_open+0xb8/0x220
[    7.620715]  do_dentry_open+0x15c/0x600
[    7.620724]  vfs_open+0x34/0xf8
[    7.620731]  path_openat+0x79c/0x1018
[    7.620738]  do_filp_open+0xc0/0x188
[    7.620744]  do_sys_openat2+0xa0/0x118
[    7.620752]  __arm64_sys_openat+0x6c/0xc0
[    7.620759]  invoke_syscall+0x50/0x120
[    7.620766]  el0_svc_common.constprop.0+0x48/0xf0
[    7.620772]  do_el0_svc+0x24/0x38
[    7.620776]  el0_svc+0x3c/0x130
[    7.620788]  el0t_64_sync_handler+0x10c/0x138
[    7.620796]  el0t_64_sync+0x198/0x1a0
[    7.620807] Code: 52800033 72a00053 d503201f f9402420 (f9401801) 
[    7.620812] ---[ end trace 0000000000000000 ]---

[    6.431458] Internal error: Oops: 0000000096000006 [#1]  SMP
[    6.431465] Modules linked in: ufs_qcom(+) icc_osm_l3(+) phy_qcom_qmp_ufs(+) qrtr slim_qcom_ngd_ctrl(+) slimbus pdr_interface qcom_pdr_msg phy_qcom_qmp_pcie(+) icc_bwmon llcc_qcom qcom_q6v5_pas(+) qcom_pil_info display_connector qcom_q6v5 qcom_sysmon drm_kms_helper qcom_common qcom_glink_smem mdt_loader drm qmi_helpers backlight rmtfs_mem socinfo
[    6.431536] CPU: 4 UID: 0 PID: 399 Comm: (udev-worker) Not tainted 6.16.0-rc3-next-20250625 #1 PREEMPT 
[    6.431546] Hardware name: Thundercomm Dragonboard 845c (DT)
[    6.431550] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.431558] pc : ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom]
[    6.431575] lr : ufshcd_setup_clocks+0x68/0x4c8
[    6.431587] sp : ffff8000812ab640
[    6.431591] x29: ffff8000812ab640 x28: 0000000000000001 x27: ffff000080df7270
[    6.431603] x26: ffff000080df72a0 x25: ffff000080df6870 x24: 0000000000000000
[    6.431614] x23: ffff000080df7280 x22: ffff000080df72a0 x21: 0000000000000000
[    6.431625] x20: ffffd3dbafa6fa98 x19: ffff000080df6870 x18: 0000000000000000
[    6.431636] x17: 5453595342555300 x16: 305f666d745f6973 x15: 0000000000000100
[    6.431647] x14: ffffffffffffffff x13: 0000000000000030 x12: 0101010101010101
[    6.431658] x11: ffff000080da9e18 x10: 0000000000000000 x9 : ffffd3dbadbdc858
[    6.431669] x8 : ffff8000812ab4b8 x7 : fefefefefefefefe x6 : 0000000000000001
[    6.431680] x5 : ffffffffffffffc8 x4 : 00000000c0000000 x3 : ffffd3db84a60058
[    6.431690] x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff000080df6870
[    6.431701] Call trace:
[    6.431706]  ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom] (P)
[    6.431722]  ufshcd_setup_clocks+0x68/0x4c8
[    6.431729]  ufshcd_init+0x278/0xff8
[    6.431738]  ufshcd_pltfrm_init+0x558/0x878
[    6.431749]  ufs_qcom_probe+0x28/0x68 [ufs_qcom]
[    6.431762]  platform_probe+0x70/0xd8
[    6.431774]  really_probe+0xc8/0x3a0
[    6.431782]  __driver_probe_device+0x84/0x170
[    6.431790]  driver_probe_device+0x44/0x120
[    6.431797]  __driver_attach+0xf8/0x208
[    6.431804]  bus_for_each_dev+0x90/0xf8
[    6.431811]  driver_attach+0x2c/0x40
[    6.431818]  bus_add_driver+0x118/0x248
[    6.431825]  driver_register+0x64/0x138
[    6.431833]  __platform_driver_register+0x2c/0x40
[    6.431841]  ufs_qcom_pltform_init+0x28/0xff8 [ufs_qcom]
[    6.431853]  do_one_initcall+0x60/0x290
[    6.431863]  do_init_module+0x60/0x268
[    6.431873]  load_module+0x1f30/0x2050
[    6.431882]  init_module_from_file+0x90/0xe0
[    6.431891]  __arm64_sys_finit_module+0x270/0x370
[    6.431900]  invoke_syscall+0x50/0x120
[    6.431908]  el0_svc_common.constprop.0+0x48/0xf0
[    6.431914]  do_el0_svc+0x24/0x38
[    6.431921]  el0_svc+0x3c/0x130
[    6.431932]  el0t_64_sync_handler+0x10c/0x138
[    6.431942]  el0t_64_sync+0x198/0x1a0
[    6.431953] Code: a90157f3 aa0003f3 f90013f6 f9405c15 (f94002b6) 
[    6.431959] ---[ end trace 0000000000000000 ]---

[    6.471912] Internal error: Oops: 0000000096000007 [#1]  SMP
[    6.471916] Modules linked in: videobuf2_v4l2 qcom_spmi_temp_alarm(+)
[    6.475372] qcom-pcie 1c08000.pcie: host bridge /soc@0/pcie@1c08000 ranges:
[    6.475478] qcom-pcie 1c08000.pcie:       IO 0x0040200000..0x00402fffff -> 0x0000000000
[    6.475529] qcom-pcie 1c08000.pcie:      MEM 0x0040300000..0x005fffffff -> 0x0040300000
[    6.476853] remoteproc remoteproc3: 4080000.remoteproc is available
[    6.479214] /soc@0/display-subsystem@ae00000/dsi@ae96000: Fixed dependency cycle(s) with /soc@0/geniqup@ac0000/i2c@a88000/hdmi-bridge@3b
[    6.479425] /soc@0/display-subsystem@ae00000/dsi@ae94000: Fixed dependency cycle(s) with /soc@0/geniqup@ac0000/i2c@a88000/hdmi-bridge@3b
[    6.479581] /soc@0/geniqup@ac0000/i2c@a88000/hdmi-bridge@3b: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/dsi@ae96000
[    6.479674] /soc@0/geniqup@ac0000/i2c@a88000/hdmi-bridge@3b: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/dsi@ae94000
[    6.485486] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    6.492881]  camcc_sdm845 soundcore qcom_pon drm_client_lib qcom_stats reset_qcom_pdc spi_geni_qcom pwrseq_core phy_qcom_qmp_usb videobuf2_common typec qcom_rng
[    6.495733] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[    6.503166]  qcom_q6v5_mss gpi coresight_stm ufs_qcom(+) phy_qcom_qmp_ufs qcrypto
[    6.507101] xhci-hcd xhci-hcd.0.auto: hcc params 0x0230fe65 hci version 0x110 quirks 0x0000808002000010
[    6.512302]  stm_core cfg80211 qrtr phy_qcom_qmp_pcie slim_qcom_ngd_ctrl rfkill slimbus
[    6.515426] xhci-hcd xhci-hcd.0.auto: irq 169, io mem 0x0a800000
[    6.518554]  display_connector lmh icc_osm_l3 pdr_interface qcom_pdr_msg qcom_wdt qcom_q6v5_pas
[    6.533131] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    6.540884]  qcom_pil_info qcom_q6v5 drm_kms_helper llcc_qcom qcom_sysmon icc_bwmon qcom_common
[    6.545814] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[    6.548716]  drm
[    6.554250] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[    6.559328]  qcom_glink_smem mdt_loader qmi_helpers backlight
[    6.565271] hub 1-0:1.0: USB hub found
[    6.571263]  socinfo rmtfs_mem
[    6.571268] CPU: 6 UID: 0 PID: 386 Comm: (udev-worker) Not tainted 6.16.0-rc3-next-20250625 #1 PREEMPT 
[    6.576348] qcom-pcie 1c08000.pcie: iATU: unroll F, 8 ob, 8 ib, align 4K, limit 1024G
[    6.576401] qcom-pcie 1c00000.pcie: iATU: unroll F, 32 ob, 8 ib, align 4K, limit 4G
[    6.576908] qcom-pcie 1c08000.pcie: PCI host bridge to bus 0001:00
[    6.576925] pci_bus 0001:00: root bus resource [bus 00-ff]
[    6.576937] pci_bus 0001:00: root bus resource [io  0x100000-0x1fffff] (bus address [0x0000-0xfffff])
[    6.576946] pci_bus 0001:00: root bus resource [mem 0x40300000-0x5fffffff]
[    6.577582] pci 0001:00:00.0: [17cb:0107] type 01 class 0x060400 PCIe Root Port
[    6.577638] pci 0001:00:00.0: BAR 0 [mem 0x00000000-0x00000fff]
[    6.577654] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[    6.577676] pci 0001:00:00.0:   bridge window [io  0x100000-0x100fff]
[    6.577688] pci 0001:00:00.0:   bridge window [mem 0x00000000-0x000fffff]
[    6.577728] pci 0001:00:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[    6.577889] pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
[    6.578680] pci 0001:00:00.0: Adding to iommu group 16
[    6.583353] pci 0001:00:00.0: BAR 0 [mem 0x40300000-0x40300fff]: assigned
[    6.583372] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[    6.583400] pci_bus 0001:00: resource 4 [io  0x100000-0x1fffff]
[    6.583409] pci_bus 0001:00: resource 5 [mem 0x40300000-0x5fffffff]
[    6.583462] qcom-pcie 1c00000.pcie: PCI host bridge to bus 0000:00
[    6.583477] pci_bus 0000:00: root bus resource [bus 00-ff]
[    6.583486] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff]
[    6.583494] pci_bus 0000:00: root bus resource [mem 0x60300000-0x60ffffff]
[    6.584014] pci 0000:00:00.0: [17cb:0106] type 01 class 0x060400 PCIe Root Port
[    6.584067] pci 0000:00:00.0: BAR 0 [mem 0x00000000-0x00000fff]
[    6.584082] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    6.584102] pci 0000:00:00.0:   bridge window [io  0x0000-0x0fff]
[    6.584115] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff]
[    6.584140] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[    6.584279] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[    6.584932] pci 0000:00:00.0: Adding to iommu group 17
[    6.585557] hub 1-0:1.0: 1 port detected
[    6.589380] pci 0000:01:00.0: [1912:0014] type 00 class 0x0c0330 PCIe Endpoint
[    6.589751] pci 0000:01:00.0: BAR 0 [mem 0x00000000-0x00001fff 64bit]
[    6.590340] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    6.591275] pci 0000:01:00.0: Adding to iommu group 17
[    6.591570] pci 0000:00:00.0: bridge window [mem 0x60300000-0x603fffff]: assigned
[    6.591581] pci 0000:00:00.0: BAR 0 [mem 0x60400000-0x60400fff]: assigned
[    6.591597] pci 0000:01:00.0: BAR 0 [mem 0x60300000-0x60301fff 64bit]: assigned
[    6.591673] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    6.591687] pci 0000:00:00.0:   bridge window [mem 0x60300000-0x603fffff]
[    6.591707] pci_bus 0000:00: resource 4 [io  0x0000-0xfffff]
[    6.591715] pci_bus 0000:00: resource 5 [mem 0x60300000-0x60ffffff]
[    6.591724] pci_bus 0000:01: resource 1 [mem 0x60300000-0x603fffff]
[    6.592544] Hardware name: Thundercomm Dragonboard 845c (DT)
[    6.592546] pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.592549] pc : ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom]
[    6.595025] pcieport 0001:00:00.0: PME: Signaling with IRQ 187
[    6.595423] pcieport 0001:00:00.0: AER: enabled with IRQ 187
[    6.599159] pcieport 0000:00:00.0: PME: Signaling with IRQ 189
[    6.599507] pcieport 0000:00:00.0: AER: enabled with IRQ 189
[    6.599911] pci 0000:01:00.0: enabling device (0000 -> 0002)
[    6.600836] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    6.608666] lr : ufshcd_setup_clocks+0x68/0x4c8
[    6.618161] pci 0000:01:00.0: quirk_usb_early_handoff+0x0/0xa40 took 17844 usecs
[    6.622003] hub 2-0:1.0: USB hub found
[    6.626971] sp : ffff800081aaf660
[    6.626973] x29: ffff800081aaf660 x28: 0000000000000001 x27: ffff00008270f270
[    6.626977] x26: ffff00008270f2a0 x25: ffff00008270e870 x24: 0000000000000000
[    6.626980] x23: ffff00008270f280 x22: ffff00008270f2a0 x21: 0000000000000000
[    6.633485] hub 2-0:1.0: 1 port detected
[    6.640475] 
[    6.640476] x20: ffffca3ffa8a3a88 x19: ffff00008270e870 x18: ffffffdfc0255300
[    6.640479] x17: 7364612f3534386d x16: 0000000000000100 x15: 0000000000000000
[    6.640482] x14: ffffffffffffffff x13: 0000000000000030 x12: 0101010101010101
[    6.640486] x11: ffff00008266a118 x10: 0000000000000000 x9 : ffffca3ff87c25a8
[    7.238697] x8 : ffff800081aaf4d8 x7 : fefefefefefefefe x6 : 0000000000000001
[    7.245888] x5 : ffffffffffffffc8 x4 : 00000000c0000000 x3 : ffffca3fd5441058
[    7.253081] x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff00008270e870
[    7.260271] Call trace:
[    7.262745]  ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom] (P)
[    7.268452]  ufshcd_setup_clocks+0x68/0x4c8
[    7.272675]  ufshcd_init+0x278/0xff8
[    7.276287]  ufshcd_pltfrm_init+0x558/0x878
[    7.280511]  ufs_qcom_probe+0x28/0x68 [ufs_qcom]
[    7.285175]  platform_probe+0x70/0xd8
[    7.288875]  really_probe+0xc8/0x3a0
[    7.292486]  __driver_probe_device+0x84/0x170
[    7.296879]  driver_probe_device+0x44/0x120
[    7.301102]  __driver_attach+0xf8/0x208
[    7.304971]  bus_for_each_dev+0x90/0xf8
[    7.308839]  driver_attach+0x2c/0x40
[    7.312450]  bus_add_driver+0x118/0x248
[    7.316318]  driver_register+0x64/0x138
[    7.320186]  __platform_driver_register+0x2c/0x40
[    7.324934]  ufs_qcom_pltform_init+0x28/0xfff8 [ufs_qcom]
[    7.330376]  do_one_initcall+0x60/0x290
[    7.334247]  do_init_module+0x60/0x268
[    7.338031]  load_module+0x1fa4/0x2098
[    7.341814]  init_module_from_file+0x90/0xe0
[    7.346121]  __arm64_sys_finit_module+0x270/0x370
[    7.350869]  invoke_syscall.constprop.0+0x58/0xf8
[    7.355618]  do_el0_svc+0x48/0xd8
[    7.358963]  el0_svc+0x44/0x190
[    7.362137]  el0t_64_sync_handler+0x10c/0x138
[    7.366530]  el0t_64_sync+0x198/0x1a0
[    7.370230] Code: a90157f3 aa0003f3 f90013f6 f9405c15 (f94002b6) 
[    7.376372] ---[ end trace 0000000000000000 ]---

[    6.357042] Internal error: Oops: 0000000096000007 [#1]  SMP
[    6.357046] Modules linked in: cfg80211(+) qcom_q6v5_mss qcom_wdt qcom_pdr_msg icc_osm_l3 ufs_qcom(+) phy_qcom_qmp_ufs qcrypto rfkill lmh phy_qcom_qmp_pcie qrtr icc_bwmon llcc_qcom qcom_q6v5_pas(+) qcom_pil_info display_connector qcom_q6v5 qcom_sysmon drm_kms_helper qcom_common qcom_glink_smem mdt_loader qmi_helpers drm backlight socinfo rmtfs_mem
[    6.357078] CPU: 7 UID: 0 PID: 364 Comm: (udev-worker) Not tainted 6.16.0-rc3-next-20250625 #1 PREEMPT 
[    6.357082] Hardware name: Thundercomm Dragonboard 845c (DT)
[    6.357084] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.357086] pc : ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom]
[    6.357096] lr : ufshcd_setup_clocks+0x68/0x4c8
[    6.357105] sp : ffff80008622f660
[    6.357106] x29: ffff80008622f660 x28: 0000000000000001 x27: ffff000081d09270
[    6.357111] x26: ffff000081d092a0 x25: ffff000081d08870 x24: 0000000000000000
[    6.357114] x23: ffff000081d09280 x22: ffff000081d092a0 x21: 0000000000000000
[    6.357118] x20: ffffc6e990ea3a88 x19: ffff000081d08870 x18: 0000000000000000
[    6.357122] x17: 30203e2d20666666 x16: 0000000000000100 x15: 0000000000000000
[    6.357126] x14: ffffffffffffffff x13: 0000000000000030 x12: 0101010101010101
[    6.357129] x11: ffff000082eeff18 x10: 0000000000000000 x9 : ffffc6e98edc25a8
[    6.357133] x8 : ffff80008622f4d8 x7 : fefefefefefefefe x6 : 0000000000000001
[    6.357136] x5 : ffffffffffffffc8 x4 : 00000000c0000000 x3 : ffffc6e9427a1058
[    6.357140] x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff000081d08870
[    6.357143] Call trace:
[    6.357146]  ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom] (P)
[    6.357151]  ufshcd_setup_clocks+0x68/0x4c8
[    6.357155]  ufshcd_init+0x278/0xff8
[    6.357158]  ufshcd_pltfrm_init+0x558/0x878
[    6.357163]  ufs_qcom_probe+0x28/0x68 [ufs_qcom]
[    6.357167]  platform_probe+0x70/0xd8
[    6.357172]  really_probe+0xc8/0x3a0
[    6.357175]  __driver_probe_device+0x84/0x170
[    6.357178]  driver_probe_device+0x44/0x120
[    6.357180]  __driver_attach+0xf8/0x208
[    6.357183]  bus_for_each_dev+0x90/0xf8
[    6.357185]  driver_attach+0x2c/0x40
[    6.357187]  bus_add_driver+0x118/0x248
[    6.357189]  driver_register+0x64/0x138
[    6.357191]  __platform_driver_register+0x2c/0x40
[    6.357194]  ufs_qcom_pltform_init+0x28/0xfff8 [ufs_qcom]
[    6.357198]  do_one_initcall+0x60/0x290
[    6.357203]  do_init_module+0x60/0x268
[    6.357207]  load_module+0x1fa4/0x2098
[    6.357210]  init_module_from_file+0x90/0xe0
[    6.357213]  __arm64_sys_finit_module+0x270/0x370
[    6.357215]  invoke_syscall.constprop.0+0x58/0xf8
[    6.357220]  do_el0_svc+0x48/0xd8
[    6.357223]  el0_svc+0x44/0x190
[    6.357228]  el0t_64_sync_handler+0x10c/0x138
[    6.357231]  el0t_64_sync+0x198/0x1a0
[    6.357235] Code: a90157f3 aa0003f3 f90013f6 f9405c15 (f94002b6) 
[    6.357238] ---[ end trace 0000000000000000 ]---

[    6.485169] Internal error: Oops: 0000000096000007 [#1]  SMP
[    6.485173] Modules linked in: i2c_qcom_geni
[    6.494564] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    6.497630]  videobuf2_common pwrseq_core spi_geni_qcom typec phy_qcom_qmp_usb gpi qcom_rng stm_core qcom_q6v5_mss qrtr
[    6.509127] pci 0000:00:00.0:   bridge window [io  0x100000-0x100fff]
[    6.513500]  rfkill ufs_qcom(+) lmh icc_osm_l3 phy_qcom_qmp_pcie phy_qcom_qmp_ufs qcom_q6v5_pas qcom_pil_info slim_qcom_ngd_ctrl(+) qcom_q6v5
[    6.520104] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff]
[    6.524831]  qcrypto qcom_sysmon qcom_wdt slimbus pdr_interface qcom_pdr_msg llcc_qcom display_connector icc_bwmon qcom_common qcom_glink_smem
[    6.529774] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[    6.534679]  drm_kms_helper mdt_loader qmi_helpers drm backlight socinfo
[    6.539669] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[    6.544603]  rmtfs_mem
[    6.544608] CPU: 6 UID: 0 PID: 356 Comm: (udev-worker) Not tainted 6.16.0-rc3-next-20250625 #1 PREEMPT 
[    6.550058] pci 0000:00:00.0: Adding to iommu group 17
[    6.560727] Hardware name: Thundercomm Dragonboard 845c (DT)
[    6.560729] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.560732] pc : ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom]
[    6.568238] pci 0000:01:00.0: [1912:0014] type 00 class 0x0c0330 PCIe Endpoint
[    6.576770] lr : ufshcd_setup_clocks+0x68/0x4c8
[    6.576780] sp : ffff80008618f660
[    6.576781] x29: ffff80008618f660 x28: 0000000000000001
[    6.583068] pci 0000:01:00.0: BAR 0 [mem 0x00000000-0x00001fff 64bit]
[    6.585918]  x27: ffff000083d07270
[    6.585920] x26: ffff000083d072a0 x25: ffff000083d06870 x24: 0000000000000000
[    6.585923] x23: ffff000083d07280
[    6.591379] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    6.600208]  x22: ffff000083d072a0 x21: 0000000000000000
[    6.600211] x20: ffffd20fec2a3a88 x19: ffff000083d06870 x18: ffffffdfc0256740
[    6.600215] x17: 0000000000000000
[    6.613190] pci 0000:01:00.0: Adding to iommu group 17
[    6.624891]  x16: 0000000000000100 x15: 0000000000000000
[    6.624894] x14: ffffffffffffffff x13: 0000000000000030 x12: 0101010101010101
[    6.624897] x11: ffff000081f60718 x10: 0000000000000000 x9 : ffffd20fea1c25a8
[    6.624901] x8 : ffff80008618f4d8
[    6.641974] pci 0000:00:00.0: bridge window [mem 0x60300000-0x603fffff]: assigned
[    6.643417] pcieport 0001:00:00.0: PME: Signaling with IRQ 178
[    6.644142] pcieport 0001:00:00.0: AER: enabled with IRQ 178
[    6.649576]  x7 : fefefefefefefefe x6 : 0000000000000001
[    6.649579] x5 : ffffffffffffffc8 x4 : 00000000c0000000 x3 : ffffd20f731e1058
[    6.649582] x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff000083d06870
[    6.652493] pci 0000:00:00.0: BAR 0 [mem 0x60400000-0x60400fff]: assigned
[    6.658018] Call trace:
[    6.658020]  ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom] (P)
[    6.663996] pci 0000:01:00.0: BAR 0 [mem 0x60300000-0x60301fff 64bit]: assigned
[    6.669074]  ufshcd_setup_clocks+0x68/0x4c8
[    6.669078]  ufshcd_init+0x278/0xff8
[    6.677024] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    6.683190]  ufshcd_pltfrm_init+0x558/0x878
[    6.683196]  ufs_qcom_probe+0x28/0x68 [ufs_qcom]
[    6.688727] pci 0000:00:00.0:   bridge window [mem 0x60300000-0x603fffff]
[    6.695032]  platform_probe+0x70/0xd8
[    6.701969] pci_bus 0000:00: resource 4 [io  0x100000-0x1fffff]
[    6.709326]  really_probe+0xc8/0x3a0
[    6.709329]  __driver_probe_device+0x84/0x170
[    6.715299] pci_bus 0000:00: resource 5 [mem 0x60300000-0x60ffffff]
[    6.720557]  driver_probe_device+0x44/0x120
[    6.720560]  __driver_attach+0xf8/0x208
[    6.720562]  bus_for_each_dev+0x90/0xf8
[    6.726703] pci_bus 0000:01: resource 1 [mem 0x60300000-0x603fffff]
[    6.733532]  driver_attach+0x2c/0x40
[    6.733535]  bus_add_driver+0x118/0x248
[    6.733537]  driver_register+0x64/0x138
[    6.733539]  __platform_driver_register+0x2c/0x40
[    6.733542]  ufs_qcom_pltform_init+0x28/0xfff8 [ufs_qcom]
[    6.742797] pcieport 0000:00:00.0: PME: Signaling with IRQ 180
[    6.749053]  do_one_initcall+0x60/0x290
[    6.749058]  do_init_module+0x60/0x268
[    6.749063]  load_module+0x1fa4/0x2098
[    6.756001] pcieport 0000:00:00.0: AER: enabled with IRQ 180
[    6.760375]  init_module_from_file+0x90/0xe0
[    6.760379]  __arm64_sys_finit_module+0x270/0x370
[    6.760381]  invoke_syscall.constprop.0+0x58/0xf8
[    6.760386]  do_el0_svc+0x48/0xd8
[    6.767401] pci 0000:01:00.0: enabling device (0000 -> 0002)
[    6.772486]  el0_svc+0x44/0x190
[    6.772491]  el0t_64_sync_handler+0x10c/0x138
[    6.772493]  el0t_64_sync+0x198/0x1a0
[    6.772498] Code: a90157f3 aa0003f3 f90013f6 f9405c15 (f94002b6) 
[    6.772501] ---[ end trace 0000000000000000 ]---

[    6.375055] Internal error: Oops: 0000000096000007 [#1]  SMP
[    6.375063] Modules linked in: stm_core qcrypto rfkill phy_qcom_qmp_ufs phy_qcom_qmp_pcie lmh qcom_pil_info qcom_pdr_msg ufs_qcom(+) icc_osm_l3 qcom_wdt qcom_q6v5 display_connector llcc_qcom qcom_sysmon drm_kms_helper qcom_common icc_bwmon qcom_glink_smem mdt_loader qmi_helpers drm backlight rmtfs_mem socinfo
[    6.375134] CPU: 4 UID: 0 PID: 353 Comm: (udev-worker) Not tainted 6.16.0-rc3-next-20250625 #1 PREEMPT 
[    6.375144] Hardware name: Thundercomm Dragonboard 845c (DT)
[    6.375149] pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.375156] pc : ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom]
[    6.375173] lr : ufshcd_setup_clocks+0x68/0x4c8
[    6.375190] sp : ffff80008602f660
[    6.375193] x29: ffff80008602f660 x28: 0000000000000001 x27: ffff000090c81270
[    6.375205] x26: ffff000090c812a0 x25: ffff000090c80870 x24: 0000000000000000
[    6.375216] x23: ffff000090c81280 x22: ffff000090c812a0 x21: 0000000000000000
[    6.375227] x20: ffffa40d3aca3a88 x19: ffff000090c80870 x18: 0000000000000000
[    6.375237] x17: 0000000000000000 x16: 0000000000000100 x15: 0000000000000000
[    6.375248] x14: ffffffffffffffff x13: 0000000000000030 x12: 0101010101010101
[    6.375259] x11: ffff000081539b18 x10: 0000000000000000 x9 : ffffa40d38bc25a8
[    6.375269] x8 : ffff80008602f4d8 x7 : fefefefefefefefe x6 : 0000000000000001
[    6.375279] x5 : ffffffffffffffc8 x4 : 00000000c0000000 x3 : ffffa40ce8901058
[    6.375290] x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff000090c80870
[    6.375301] Call trace:
[    6.375305]  ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom] (P)
[    6.375320]  ufshcd_setup_clocks+0x68/0x4c8
[    6.375330]  ufshcd_init+0x278/0xff8
[    6.375339]  ufshcd_pltfrm_init+0x558/0x878
[    6.375349]  ufs_qcom_probe+0x28/0x68 [ufs_qcom]
[    6.375361]  platform_probe+0x70/0xd8
[    6.375372]  really_probe+0xc8/0x3a0
[    6.375380]  __driver_probe_device+0x84/0x170
[    6.375387]  driver_probe_device+0x44/0x120
[    6.375395]  __driver_attach+0xf8/0x208
[    6.375402]  bus_for_each_dev+0x90/0xf8
[    6.375409]  driver_attach+0x2c/0x40
[    6.375416]  bus_add_driver+0x118/0x248
[    6.375422]  driver_register+0x64/0x138
[    6.375430]  __platform_driver_register+0x2c/0x40
[    6.375438]  ufs_qcom_pltform_init+0x28/0xfff8 [ufs_qcom]
[    6.375450]  do_one_initcall+0x60/0x290
[    6.375460]  do_init_module+0x60/0x268
[    6.375469]  load_module+0x1fa4/0x2098
[    6.375477]  init_module_from_file+0x90/0xe0
[    6.375486]  __arm64_sys_finit_module+0x270/0x370
[    6.375494]  invoke_syscall.constprop.0+0x58/0xf8
[    6.375506]  do_el0_svc+0x48/0xd8
[    6.375516]  el0_svc+0x44/0x190
[    6.375527]  el0t_64_sync_handler+0x10c/0x138
[    6.375535]  el0t_64_sync+0x198/0x1a0
[    6.375546] Code: a90157f3 aa0003f3 f90013f6 f9405c15 (f94002b6) 
[    6.375552] ---[ end trace 0000000000000000 ]---

[    6.484058] Internal error: Oops: 0000000096000007 [#1]  SMP
[    6.487003] energy_model: Accessing cpu4 policy failed
[    6.492501] Modules linked in: aux_bridge coresight_stm(+) videobuf2_v4l2(+) cfg80211(+) phy_qcom_qmp_usb(+) stm_core typec qcom_q6v5_mss videobuf2_common slim_qcom_ngd_ctrl(+) gpi qcom_rng phy_qcom_qmp_pcie icc_osm_l3 rfkill qcrypto ufs_qcom(+) slimbus pdr_interface qcom_pdr_msg lmh phy_qcom_qmp_ufs qcom_wdt qrtr display_connector icc_bwmon llcc_qcom drm_kms_helper qcom_q6v5_pas qcom_pil_info drm qcom_q6v5 qcom_sysmon qcom_common qcom_glink_smem mdt_loader qmi_helpers backlight socinfo rmtfs_mem
[    6.604726] CPU: 7 UID: 0 PID: 382 Comm: (udev-worker) Not tainted 6.16.0-rc3-next-20250625 #1 PREEMPT 
[    6.614213] Hardware name: Thundercomm Dragonboard 845c (DT)
[    6.619929] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.626954] pc : ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom]
[    6.632684] lr : ufshcd_setup_clocks+0x68/0x4c8
[    6.637275] sp : ffff800084ccf660
[    6.640632] x29: ffff800084ccf660 x28: 0000000000000001 x27: ffff00008234b270
[    6.647838] x26: ffff00008234b2a0 x25: ffff00008234a870 x24: 0000000000000000
[    6.655042] x23: ffff00008234b280 x22: ffff00008234b2a0 x21: 0000000000000000
[    6.662247] x20: ffffa8a352ea3a88 x19: ffff00008234a870 x18: 0000000000000000
[    6.669453] x17: 7364632f3534386d x16: 0000000000000100 x15: 0000000000000000
[    6.676656] x14: ffffffffffffffff x13: 0000000000000030 x12: 0101010101010101
[    6.683861] x11: ffff000082d8ac18 x10: 0000000000000000 x9 : ffffa8a350dc25a8
[    6.691065] x8 : ffff800084ccf4d8 x7 : fefefefefefefefe x6 : 0000000000000001
[    6.698268] x5 : ffffffffffffffc8 x4 : 00000000c0000000 x3 : ffffa8a2e7601058
[    6.705474] x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff00008234a870
[    6.712677] Call trace:
[    6.715158]  ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom] (P)
[    6.720887]  ufshcd_setup_clocks+0x68/0x4c8
[    6.725126]  ufshcd_init+0x278/0xff8
[    6.728747]  ufshcd_pltfrm_init+0x558/0x878
[    6.732986]  ufs_qcom_probe+0x28/0x68 [ufs_qcom]
[    6.737660]  platform_probe+0x70/0xd8
[    6.741370]  really_probe+0xc8/0x3a0
[    6.744991]  __driver_probe_device+0x84/0x170
[    6.749400]  driver_probe_device+0x44/0x120
[    6.753636]  __driver_attach+0xf8/0x208
[    6.757518]  bus_for_each_dev+0x90/0xf8
[    6.761398]  driver_attach+0x2c/0x40
[    6.765017]  bus_add_driver+0x118/0x248
[    6.768896]  driver_register+0x64/0x138
[    6.772777]  __platform_driver_register+0x2c/0x40
[    6.777533]  ufs_qcom_pltform_init+0x28/0xfff8 [ufs_qcom]
[    6.782995]  do_one_initcall+0x60/0x290
[    6.786877]  do_init_module+0x60/0x268
[    6.790671]  load_module+0x1fa4/0x2098
[    6.794464]  init_module_from_file+0x90/0xe0
[    6.798789]  __arm64_sys_finit_module+0x270/0x370
[    6.803545]  invoke_syscall.constprop.0+0x58/0xf8
[    6.808306]  do_el0_svc+0x48/0xd8
[    6.811670]  el0_svc+0x44/0x190
[    6.814861]  el0t_64_sync_handler+0x10c/0x138
[    6.819271]  el0t_64_sync+0x198/0x1a0
[    6.822981] Code: a90157f3 aa0003f3 f90013f6 f9405c15 (f94002b6) 
[    6.829131] ---[ end trace 0000000000000000 ]---

[   36.887650] Internal error: Oops: 0000000096000005 [#1]  SMP
[   36.895213] Modules linked in:
[   36.897565] CPU: 0 UID: 0 PID: 321 Comm: kunit_try_catch Tainted: G                 N  6.16.0-rc3-next-20250625 #1 PREEMPT 
[   36.898206] Tainted: [N]=TEST
[   36.898398] Hardware name: linux,dummy-virt (DT)
[   36.898961] pstate: 81400009 (Nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[   36.899250] pc : kunit_test_null_dereference+0x2c/0x114
[   36.900181] lr : kunit_generic_run_threadfn_adapter+0x84/0x104
[   36.900458] sp : ffff800080f17db0
[   36.900602] x29: ffff800080f17dc0 x28: dfff800000000000 x27: 1ffe000018ede945
[   36.901333] x26: fff00000c765e0a0 x25: ffff800080f07b48 x24: fff00000c7686790
[   36.901788] x23: 1ffe000018ecbc01 x22: dfff800000000000 x21: dfff800000000000
[   36.902406] x20: ffff9e27fe3b2378 x19: fff00000c765e008 x18: 0000000000000002
[   36.902919] x17: 0000000000000075 x16: 0000000000001931 x15: 0000000000000001
[   36.903346] x14: 1ffe000018edea33 x13: 0000000000000000 x12: 0000000000000000
[   36.903742] x11: fffd800018edea34 x10: dfff800000000000 x9 : 1ffe000018ecbc02
[   36.904223] x8 : 0cf069a1289b1800 x7 : 00000000188ef0a1 x6 : 00000000d8dfda23
[   36.904571] x5 : 0000000000000000 x4 : 0000000000000001 x3 : ffff9e28001d9758
[   36.905066] x2 : 0000000000000001 x1 : 0000000000000001 x0 : ffff800080087b00
[   36.905614] Call trace:
[   36.905948]  kunit_test_null_dereference+0x2c/0x114 (P)
[   36.906698]  kunit_generic_run_threadfn_adapter+0x84/0x104
[   36.906978]  kthread+0x3f4/0x51c
[   36.907132]  ret_from_fork+0x10/0x20
[   36.907709] Code: d2d00015 f9426d08 f2fbfff5 f90007e8 (39c002a8) 
[   36.908320] ---[ end trace 0000000000000000 ]---

[  104.403295] Internal error: Oops: 0000000096000005 [#1]  SMP
[  104.409191] Modules linked in:
[  104.409674] CPU: 0 UID: 0 PID: 544 Comm: kunit_try_catch Tainted: G    B            N  6.16.0-rc3-next-20250625 #1 PREEMPT 
[  104.410214] Tainted: [B]=BAD_PAGE, [N]=TEST
[  104.410478] Hardware name: linux,dummy-virt (DT)
[  104.410820] pstate: 12402009 (nzcV daif +PAN -UAO +TCO -DIT -SSBS BTYPE=--)
[  104.411247] pc : kunit_test_null_dereference+0x70/0x170
[  104.411615] lr : kunit_generic_run_threadfn_adapter+0x88/0x100
[  104.412070] sp : ffff800080ed7d30
[  104.412619] x29: ffff800080ed7d90 x28: 0000000000000000 x27: 0000000000000000
[  104.413164] x26: 1ffe0000187eeec1 x25: 0000000000000000 x24: 0000000000000004
[  104.413612] x23: fff00000c3f7760c x22: ffff9ec8ad02ab20 x21: fff00000c139d288
[  104.414062] x20: 1ffff000101dafa6 x19: ffff800080087990 x18: 0000000018174c71
[  104.414516] x17: 0000000000000001 x16: fff00000da462d28 x15: fff00000ff616b08
[  104.414926] x14: 00000000f1f1f1f1 x13: 1ffe00001b48c589 x12: fffd800019798b3c
[  104.415341] x11: 1ffe000019798b3b x10: fffd800019798b3b x9 : ffff9ec8ad0222b0
[  104.415803] x8 : ffff800080ed7c18 x7 : 0000000000000001 x6 : 0000000041b58ab3
[  104.416234] x5 : ffff7000101dafa6 x4 : 00000000f1f1f1f1 x3 : 0000000000000003
[  104.416643] x2 : dfff800000000000 x1 : fff00000cbcc5100 x0 : ffff800080087990
[  104.417070] Call trace:
[  104.417261]  kunit_test_null_dereference+0x70/0x170 (P)
[  104.417708]  kunit_generic_run_threadfn_adapter+0x88/0x100
[  104.418031]  kthread+0x328/0x630
[  104.418253]  ret_from_fork+0x10/0x20
[  104.418724] Code: b90004a3 d5384101 52800063 aa0003f3 (39c00042) 
[  104.419283] ---[ end trace 0000000000000000 ]---

[   40.890004] Internal error: Oops: 0000000096000005 [#1]  SMP
[   40.895578] Modules linked in:
[   40.898802] CPU: 1 UID: 0 PID: 321 Comm: kunit_try_catch Tainted: G                 N  6.16.0-rc3-next-20250625 #1 PREEMPT 
[   40.899796] Tainted: [N]=TEST
[   40.900170] Hardware name: linux,dummy-virt (DT)
[   40.901349] pstate: 12402009 (nzcV daif +PAN -UAO +TCO -DIT -SSBS BTYPE=--)
[   40.901952] pc : kunit_test_null_dereference+0x68/0x160
[   40.903663] lr : kunit_generic_run_threadfn_adapter+0x80/0xec
[   40.904106] sp : ffff800080ed7d30
[   40.904546] x29: ffff800080ed7d90 x28: 0000000000000000 x27: 0000000000000000
[   40.905555] x26: 1ffe000018ea3061 x25: fff00000c76b4a00 x24: 0000000000000004
[   40.906233] x23: fff00000c760d600 x22: ffffaa6358c291b8 x21: fff00000c760d608
[   40.906830] x20: 1ffff000101dafa6 x19: ffff8000800879a0 x18: 1ffff00010012ece
[   40.907352] x17: fff00000c0369288 x16: fff00000c574443c x15: 0000000000007eb0
[   40.908059] x14: 1ffe00001b5200dd x13: 1ffe000018ed6942 x12: fffd800018ed6a34
[   40.908781] x11: 1ffe000018ed6a33 x10: fffd800018ed6a33 x9 : dfff800000000000
[   40.909523] x8 : fff00000c76b519c x7 : 0000000000000001 x6 : 0000000041b58ab3
[   40.910175] x5 : ffff7000101dafa6 x4 : 00000000f1f1f1f1 x3 : 0000000000000003
[   40.910896] x2 : dfff800000000000 x1 : fff00000c76b4a00 x0 : ffff8000800879a0
[   40.911710] Call trace:
[   40.912243]  kunit_test_null_dereference+0x68/0x160 (P)
[   40.913044]  kunit_generic_run_threadfn_adapter+0x80/0xec
[   40.913428]  kthread+0x37c/0x67c
[   40.913839]  ret_from_fork+0x10/0x20
[   40.914896] Code: b90004a3 d5384101 52800063 aa0003f3 (39c00042) 
[   40.915801] ---[ end trace 0000000000000000 ]---

[   34.245822] Internal error: Oops: 0000000096000005 [#1]  SMP
[   34.253374] Modules linked in:
[   34.257543] CPU: 0 UID: 0 PID: 321 Comm: kunit_try_catch Tainted: G                 N  6.16.0-rc3-next-20250625 #1 PREEMPT 
[   34.258423] Tainted: [N]=TEST
[   34.258692] Hardware name: linux,dummy-virt (DT)
[   34.259299] pstate: 81400009 (Nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[   34.259949] pc : kunit_test_null_dereference+0x2c/0x114
[   34.261207] lr : kunit_generic_run_threadfn_adapter+0x84/0x104
[   34.261836] sp : ffff800080f27db0
[   34.262283] x29: ffff800080f27dc0 x28: dfff800000000000 x27: 1ffe000018ed0945
[   34.263150] x26: fff00000c745ffa0 x25: ffff800080f17b48 x24: fff00000c7431a90
[   34.263989] x23: 1ffe000018e8bfe1 x22: dfff800000000000 x21: dfff800000000000
[   34.264694] x20: ffffa5559d5a5308 x19: fff00000c745ff08 x18: ffff800080097940
[   34.265351] x17: ffff80008009793c x16: 0000000000000000 x15: 0000000000000001
[   34.266045] x14: 1ffe000018ed0a33 x13: 0000000000000000 x12: 0000000000000000
[   34.266659] x11: fffd800018ed0a34 x10: dfff800000000000 x9 : 1ffe000018e8bfe2
[   34.267342] x8 : de27a893b39d1900 x7 : ffff80008009794c x6 : 0000000000000014
[   34.268144] x5 : 000000002809f568 x4 : 0000000000000000 x3 : ffffa5559f3cb3f0
[   34.268665] x2 : 0000000000000001 x1 : 0000000000000001 x0 : ffff800080087b00
[   34.269359] Call trace:
[   34.269812]  kunit_test_null_dereference+0x2c/0x114 (P)
[   34.270713]  kunit_generic_run_threadfn_adapter+0x84/0x104
[   34.271096]  kthread+0x3f4/0x51c
[   34.271736]  ret_from_fork+0x10/0x20
[   34.272793] Code: d2d00015 f9426d08 f2fbfff5 f90007e8 (39c002a8) 
[   34.273676] ---[ end trace 0000000000000000 ]---

[   45.357151] Internal error: Oops: 0000000096000004 [#1]  SMP
[   45.362940] Modules linked in:
[   45.366486] CPU: 1 UID: 0 PID: 321 Comm: kunit_try_catch Tainted: G                 N  6.16.0-rc3-next-20250625 #1 PREEMPT 
[   45.367429] Tainted: [N]=TEST
[   45.367778] Hardware name: linux,dummy-virt (DT)
[   45.369164] pstate: 12402009 (nzcV daif +PAN -UAO +TCO -DIT -SSBS BTYPE=--)
[   45.369838] pc : kunit_test_null_dereference+0x6c/0x15c
[   45.371124] lr : kunit_generic_run_threadfn_adapter+0x80/0xec
[   45.371597] sp : ffff800080b57d30
[   45.372097] x29: ffff800080b57d30 x28: 0000000000000000 x27: 0000000000000000
[   45.373253] x26: 0000000000000000 x25: fff00000c7575c80 x24: fff00000c3d0a900
[   45.373873] x23: fff00000c3d0a90c x22: ffff956fdbe47a44 x21: ffff956fdf76f458
[   45.374574] x20: ffff800080087a00 x19: 1ffff0001016afac x18: 00000000000010d8
[   45.375359] x17: 00000000000010e0 x16: 00000000000010e8 x15: 00000000000010f0
[   45.376151] x14: 00000000000010f8 x13: fffd800018eaec84 x12: 1ffe000018eaec83
[   45.376933] x11: 1ffe000018eaec83 x10: fffd800018eaec83 x9 : dfff800000000000
[   45.377771] x8 : 0000000000000001 x7 : fffd800018eaec84 x6 : fff00000c757641c
[   45.378502] x5 : 0000000041b58ab3 x4 : ffff70001016afac x3 : 00000000f1f1f1f1
[   45.379277] x2 : 0000000000000003 x1 : dfff800000000000 x0 : ffff800080087a00
[   45.380349] Call trace:
[   45.380942]  kunit_test_null_dereference+0x6c/0x15c (P)
[   45.381647]  kunit_generic_run_threadfn_adapter+0x80/0xec
[   45.382197]  kthread+0x3f0/0x744
[   45.382631]  ret_from_fork+0x10/0x20
[   45.384018] Code: 72be5e42 b9000482 aa0003f4 52800062 (39c00020) 
[   45.385105] ---[ end trace 0000000000000000 ]---