[    6.766351] Internal error: Oops: 0000000096000006 [#1]  SMP
[    6.771167] qcom-pcie 1c00000.pcie: iATU: unroll F, 32 ob, 8 ib, align 4K, limit 4G
[    6.771424] qcom-pcie 1c00000.pcie: PCI host bridge to bus 0000:00
[    6.771441] pci_bus 0000:00: root bus resource [bus 00-ff]
[    6.771454] pci_bus 0000:00: root bus resource [io  0x100000-0x1fffff] (bus address [0x0000-0xfffff])
[    6.771462] pci_bus 0000:00: root bus resource [mem 0x60300000-0x60ffffff]
[    6.772067] pci 0000:00:00.0: [17cb:0106] type 01 class 0x060400 PCIe Root Port
[    6.772125] pci 0000:00:00.0: BAR 0 [mem 0x00000000-0x00000fff]
[    6.772141] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    6.772162] pci 0000:00:00.0:   bridge window [io  0x100000-0x100fff]
[    6.772175] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff]
[    6.772201] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[    6.772350] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[    6.773100] pci 0000:00:00.0: Adding to iommu group 17
[    6.778024] pci 0000:00:00.0: BAR 0 [mem 0x60300000-0x60300fff]: assigned
[    6.778042] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    6.778072] pci_bus 0000:00: resource 4 [io  0x100000-0x1fffff]
[    6.778081] pci_bus 0000:00: resource 5 [mem 0x60300000-0x60ffffff]
[    6.778731] xhci-hcd xhci-hcd.0.auto: irq 161, io mem 0x0a800000
[    6.781777] Modules linked in: i2c_qcom_geni videobuf2_v4l2 typec pwrseq_core drm_client_lib spi_geni_qcom camcc_sdm845
[    6.785288] pcieport 0000:00:00.0: PME: Signaling with IRQ 171
[    6.786284] pcieport 0000:00:00.0: AER: enabled with IRQ 171
[    6.788971] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    6.792264] pci 0000:01:00.0: [1912:0014] type 00 class 0x0c0330 PCIe Endpoint
[    6.792653] pci 0000:01:00.0: BAR 0 [mem 0x00000000-0x00001fff 64bit]
[    6.793256] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    6.794365] pci 0000:01:00.0: Adding to iommu group 17
[    6.794708] pcieport 0000:00:00.0: bridge window [mem 0x60400000-0x604fffff]: assigned
[    6.794723] pci 0000:01:00.0: BAR 0 [mem 0x60400000-0x60401fff 64bit]: assigned
[    6.794828] pci 0000:01:00.0: enabling device (0000 -> 0002)
[    6.796066]  gpi phy_qcom_qmp_usb videobuf2_common qcom_rng qcom_q6v5_mss stm_core ufs_qcom(+) phy_qcom_qmp_ufs qcrypto qrtr cfg80211 qcom_q6v5_pas(+) slim_qcom_ngd_ctrl(+) slimbus qcom_pil_info phy_qcom_qmp_pcie pdr_interface
[    6.803102] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[    6.811148]  rfkill icc_osm_l3 lmh qcom_pdr_msg icc_bwmon qcom_wdt qcom_q6v5
[    6.812829] pci 0000:01:00.0: quirk_usb_early_handoff+0x0/0xa58 took 17601 usecs
[    6.819224] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[    6.822385]  llcc_qcom qcom_sysmon qcom_common qcom_glink_smem mdt_loader display_connector
[    6.828052] hub 1-0:1.0: USB hub found
[    6.833360]  qmi_helpers drm_kms_helper drm rmtfs_mem backlight socinfo
[    6.833369] CPU: 5 UID: 0 PID: 377 Comm: (udev-worker) Not tainted 6.16.0-rc3-next-20250625 #1 PREEMPT 
[    6.833373] Hardware name: Thundercomm Dragonboard 845c (DT)
[    6.833375] pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.833378] pc : ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom]
[    6.838623] hub 1-0:1.0: 1 port detected
[    6.844602] lr : ufshcd_setup_clocks+0x68/0x4c8
[    6.844608] sp : ffff800081493640
[    6.844609] x29: ffff800081493640 x28: 0000000000000001 x27: ffff000086f3d270
[    6.844613] x26: ffff000086f3d2a0 x25: ffff000086f3c870 x24: 0000000000000000
[    6.844616] x23: ffff000086f3d280
[    6.847819] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    6.853406]  x22: ffff000086f3d2a0 x21: 0000000000000000
[    6.853409] x20: ffffcf1c91e6fa98 x19: ffff000086f3c870 x18: 0000000000000000
[    6.853412] x17: 20646e6966206f74 x16: 20656c62616e5520
[    6.859528] hub 2-0:1.0: USB hub found
[    6.864027]  x15: 0000000000000100
[    6.864029] x14: ffffffffffffffff x13: 0000000000000030 x12: 0101010101010101
[    6.864032] x11: ffff000085292c18 x10: 0000000000000000 x9 : ffffcf1c8ffdc858
[    6.864036] x8 : ffff8000814934b8 x7 : fefefefefefefefe
[    6.869421] hub 2-0:1.0: 1 port detected
[    6.875876]  x6 : 0000000000000001
[    6.875877] x5 : ffffffffffffffc8 x4 : 00000000c0000000 x3 : ffffcf1c524fb058
[    6.875881] x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff000086f3c870
[    7.314965] Call trace:
[    7.317441]  ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom] (P)
[    7.323149]  ufshcd_setup_clocks+0x68/0x4c8
[    7.327374]  ufshcd_init+0x278/0xff8
[    7.330989]  ufshcd_pltfrm_init+0x558/0x878
[    7.335216]  ufs_qcom_probe+0x28/0x68 [ufs_qcom]
[    7.339871]  platform_probe+0x70/0xd8
[    7.343574]  really_probe+0xc8/0x3a0
[    7.347188]  __driver_probe_device+0x84/0x170
[    7.351583]  driver_probe_device+0x44/0x120
[    7.355808]  __driver_attach+0xf8/0x208
[    7.359679]  bus_for_each_dev+0x90/0xf8
[    7.363550]  driver_attach+0x2c/0x40
[    7.367163]  bus_add_driver+0x118/0x248
[    7.371034]  driver_register+0x64/0x138
[    7.374905]  __platform_driver_register+0x2c/0x40
[    7.379655]  ufs_qcom_pltform_init+0x28/0xff8 [ufs_qcom]
[    7.385018]  do_one_initcall+0x60/0x290
[    7.388891]  do_init_module+0x60/0x268
[    7.392678]  load_module+0x1f30/0x2050
[    7.396463]  init_module_from_file+0x90/0xe0
[    7.400773]  __arm64_sys_finit_module+0x270/0x370
[    7.405513]  invoke_syscall+0x50/0x120
[    7.409298]  el0_svc_common.constprop.0+0x48/0xf0
[    7.414037]  do_el0_svc+0x24/0x38
[    7.417383]  el0_svc+0x3c/0x130
[    7.420559]  el0t_64_sync_handler+0x10c/0x138
[    7.424955]  el0t_64_sync+0x198/0x1a0
[    7.428656] Code: a90157f3 aa0003f3 f90013f6 f9405c15 (f94002b6) 
[    7.434801] ---[ end trace 0000000000000000 ]---

(no logs available)

(no logs available)

(no logs available)

(no logs available)

(no logs available)