[    6.012586] Internal error: Oops: 0000000096000006 [#1]  SMP
[    6.012590] Modules linked in:
[    6.015062] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    6.015340] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[    6.015393] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    6.015400] cfg80211: failed to load regulatory.db
[    6.019523] xhci-hcd xhci-hcd.0.auto: irq 171, io mem 0x0a800000
[    6.024691]  soundcore qcom_stats videobuf2_memops drm_client_lib v4l2_mem2mem reset_qcom_pdc cfg80211 coresight_stm videobuf2_v4l2 bluetooth aux_bridge camcc_sdm845 pwrseq_core i2c_qcom_geni spi_geni_qcom videobuf2_common phy_qcom_qmp_usb
[    6.030729] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    6.036715]  typec qcom_rng gpi ufs_qcom(+) rfkill qcom_q6v5_mss stm_core phy_qcom_qmp_ufs icc_osm_l3 qcrypto lmh qrtr phy_qcom_qmp_pcie slim_qcom_ngd_ctrl qcom_wdt slimbus qcom_q6v5_pas
[    6.042622] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[    6.048301]  pdr_interface qcom_pil_info qcom_q6v5 qcom_pdr_msg qcom_sysmon llcc_qcom qcom_common icc_bwmon display_connector drm_kms_helper qcom_glink_smem mdt_loader qmi_helpers
[    6.053429] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[    6.056578]  drm backlight socinfo rmtfs_mem
[    6.056585] CPU: 5 UID: 0 PID: 374 Comm: (udev-worker) Not tainted 6.16.0-rc3-next-20250625 #1 PREEMPT 
[    6.056589] Hardware name: Thundercomm Dragonboard 845c (DT)
[    6.058141] qcom-pcie 1c00000.pcie: iATU: unroll F, 32 ob, 8 ib, align 4K, limit 4G
[    6.058300] qcom-pcie 1c00000.pcie: PCI host bridge to bus 0000:00
[    6.058308] pci_bus 0000:00: root bus resource [bus 00-ff]
[    6.058313] pci_bus 0000:00: root bus resource [io  0x100000-0x1fffff] (bus address [0x0000-0xfffff])
[    6.058317] pci_bus 0000:00: root bus resource [mem 0x60300000-0x60ffffff]
[    6.058548] pci 0000:00:00.0: [17cb:0106] type 01 class 0x060400 PCIe Root Port
[    6.058570] pci 0000:00:00.0: BAR 0 [mem 0x00000000-0x00000fff]
[    6.058576] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    6.058584] pci 0000:00:00.0:   bridge window [io  0x100000-0x100fff]
[    6.058589] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff]
[    6.058599] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[    6.058663] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[    6.058975] pci 0000:00:00.0: Adding to iommu group 17
[    6.061472] pci 0000:00:00.0: BAR 0 [mem 0x60300000-0x60300fff]: assigned
[    6.061480] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    6.061490] pci_bus 0000:00: resource 4 [io  0x100000-0x1fffff]
[    6.061494] pci_bus 0000:00: resource 5 [mem 0x60300000-0x60ffffff]
[    6.062744] pcieport 0000:00:00.0: PME: Signaling with IRQ 181
[    6.066763] hub 1-0:1.0: USB hub found
[    6.070873] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.070876] pc : ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom]
[    6.070885] lr : ufshcd_setup_clocks+0x68/0x4c8
[    6.070892] sp : ffff800080fc3640
[    6.070894] x29: ffff800080fc3640
[    6.078405] hub 1-0:1.0: 1 port detected
[    6.085361]  x28: 0000000000000001 x27: ffff00008036f270
[    6.085363] x26: ffff00008036f2a0 x25: ffff00008036e870 x24: 0000000000000000
[    6.085367] x23: ffff00008036f280 x22: ffff00008036f2a0 x21: 0000000000000000
[    6.085371] x20: ffffce55f2e6fa98 x19: ffff00008036e870 x18: 0000000000000000
[    6.093989] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    6.101499] 
[    6.101500] x17: 20646e6966206f74 x16: 20656c62616e5520 x15: 0000000000000100
[    6.101503] x14: ffffffffffffffff x13: 0000000000000030 x12: 0101010101010101
[    6.101507] x11: ffff00008177dd18 x10: 0000000000000000 x9 : ffffce55f0fdc858
[    6.101510] x8 : ffff800080fc34b8 x7 : fefefefefefefefe x6 : 0000000000000001
[    6.101513] x5 : ffffffffffffffc8 x4 : 00000000c0000000 x3 : ffffce557abaa058
[    6.101516] x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff00008036e870
[    6.101519] Call trace:
[    6.101521]  ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom] (P)
[    6.107889] hub 2-0:1.0: USB hub found
[    6.115898]  ufshcd_setup_clocks+0x68/0x4c8
[    6.115901]  ufshcd_init+0x278/0xff8
[    6.115904]  ufshcd_pltfrm_init+0x558/0x878
[    6.115909]  ufs_qcom_probe+0x28/0x68 [ufs_qcom]
[    6.115912]  platform_probe+0x70/0xd8
[    6.119082] hub 2-0:1.0: 1 port detected
[    6.124785]  really_probe+0xc8/0x3a0
[    6.124788]  __driver_probe_device+0x84/0x170
[    6.124791]  driver_probe_device+0x44/0x120
[    6.124793]  __driver_attach+0xf8/0x208
[    6.124796]  bus_for_each_dev+0x90/0xf8
[    6.124798]  driver_attach+0x2c/0x40
[    6.137991] remoteproc remoteproc3: 4080000.remoteproc is available
[    6.139034]  bus_add_driver+0x118/0x248
[    6.139036]  driver_register+0x64/0x138
[    6.734767]  __platform_driver_register+0x2c/0x40
[    6.739517]  ufs_qcom_pltform_init+0x28/0xff8 [ufs_qcom]
[    6.744879]  do_one_initcall+0x60/0x290
[    6.748752]  do_init_module+0x60/0x268
[    6.752537]  load_module+0x1f30/0x2050
[    6.756321]  init_module_from_file+0x90/0xe0
[    6.760630]  __arm64_sys_finit_module+0x270/0x370
[    6.765380]  invoke_syscall+0x50/0x120
[    6.769164]  el0_svc_common.constprop.0+0x48/0xf0
[    6.773914]  do_el0_svc+0x24/0x38
[    6.777258]  el0_svc+0x3c/0x130
[    6.780433]  el0t_64_sync_handler+0x10c/0x138
[    6.784828]  el0t_64_sync+0x198/0x1a0
[    6.788528] Code: a90157f3 aa0003f3 f90013f6 f9405c15 (f94002b6) 
[    6.794672] ---[ end trace 0000000000000000 ]---

(no logs available)

(no logs available)

(no logs available)

(no logs available)

(no logs available)