Date
June 25, 2025, 8:08 a.m.
Failure - log-parser-boot - internal-error-oops-oops-smp
[ 6.662220] Internal error: Oops: 0000000096000007 [#1] SMP [ 6.662224] Modules linked in: [ 6.674400] pci 0000:00:00.0: bridge window [mem 0x60300000-0x603fffff]: assigned [ 6.674613] qcom-pcie 1c08000.pcie: PCI host bridge to bus 0001:00 [ 6.674621] pci_bus 0001:00: root bus resource [bus 00-ff] [ 6.674627] pci_bus 0001:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x0000-0xfffff]) [ 6.674630] pci_bus 0001:00: root bus resource [mem 0x40300000-0x5fffffff] [ 6.674800] pci 0001:00:00.0: [17cb:0107] type 01 class 0x060400 PCIe Root Port [ 6.674819] pci 0001:00:00.0: BAR 0 [mem 0x00000000-0x00000fff] [ 6.674826] pci 0001:00:00.0: PCI bridge to [bus 01-ff] [ 6.674833] pci 0001:00:00.0: bridge window [io 0x100000-0x100fff] [ 6.674838] pci 0001:00:00.0: bridge window [mem 0x00000000-0x000fffff] [ 6.674848] pci 0001:00:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref] [ 6.674910] pci 0001:00:00.0: PME# supported from D0 D3hot D3cold [ 6.675158] pci 0001:00:00.0: Adding to iommu group 17 [ 6.677364] pci 0001:00:00.0: BAR 0 [mem 0x40300000-0x40300fff]: assigned [ 6.677373] pci 0001:00:00.0: PCI bridge to [bus 01-ff] [ 6.677382] pci_bus 0001:00: resource 4 [io 0x100000-0x1fffff] [ 6.677385] pci_bus 0001:00: resource 5 [mem 0x40300000-0x5fffffff] [ 6.678601] pcieport 0001:00:00.0: PME: Signaling with IRQ 168 [ 6.679730] pcieport 0001:00:00.0: AER: enabled with IRQ 168 [ 6.680032] camcc_sdm845 i2c_qcom_geni videobuf2_common typec phy_qcom_qmp_usb pwrseq_core spi_geni_qcom [ 6.683474] pci 0000:00:00.0: BAR 0 [mem 0x60400000-0x60400fff]: assigned [ 6.689957] gpi qcom_rng stm_core phy_qcom_qmp_ufs qcom_q6v5_mss ufs_qcom(+) [ 6.693407] pci 0000:01:00.0: BAR 0 [mem 0x60300000-0x60301fff 64bit]: assigned [ 6.699530] qcrypto qrtr cfg80211 slim_qcom_ngd_ctrl(+) phy_qcom_qmp_pcie [ 6.701119] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 6.706224] slimbus rfkill pdr_interface qcom_wdt lmh qcom_pdr_msg [ 6.711940] pci 0000:00:00.0: bridge window [mem 0x60300000-0x603fffff] [ 6.715012] icc_osm_l3 qcom_q6v5_pas(+) icc_bwmon qcom_pil_info qcom_q6v5 [ 6.722557] pci_bus 0000:00: resource 4 [io 0x0000-0xfffff] [ 6.728769] llcc_qcom display_connector qcom_sysmon qcom_common drm_kms_helper [ 6.734300] pci_bus 0000:00: resource 5 [mem 0x60300000-0x60ffffff] [ 6.743577] qcom_glink_smem mdt_loader qmi_helpers drm backlight [ 6.750510] pci_bus 0000:01: resource 1 [mem 0x60300000-0x603fffff] [ 6.757863] socinfo rmtfs_mem [ 6.757869] CPU: 6 UID: 0 PID: 370 Comm: (udev-worker) Not tainted 6.16.0-rc3-next-20250625 #1 PREEMPT [ 6.764952] pcieport 0000:00:00.0: PME: Signaling with IRQ 170 [ 6.769087] Hardware name: Thundercomm Dragonboard 845c (DT) [ 6.769089] pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 6.769092] pc : ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom] [ 6.776663] pcieport 0000:00:00.0: AER: enabled with IRQ 170 [ 6.782412] lr : ufshcd_setup_clocks+0x68/0x4c8 [ 6.782421] sp : ffff8000819cf660 [ 6.790404] pci 0000:01:00.0: enabling device (0000 -> 0002) [ 6.796359] x29: ffff8000819cf660 x28: 0000000000000001 x27: ffff000091201270 [ 6.796362] x26: ffff0000912012a0 x25: ffff000091200870 x24: 0000000000000000 [ 6.796366] x23: ffff000091201280 [ 6.801622] pci 0000:01:00.0: quirk_usb_early_handoff+0x0/0xa40 took 10973 usecs [ 6.808384] x22: ffff0000912012a0 x21: 0000000000000000 [ 6.808387] x20: ffffbcca738a3a88 x19: ffff000091200870 x18: 0000000000000000 [ 6.815948] remoteproc remoteproc0: adsp is available [ 6.819615] x17: 632079636e65646e x16: 6570656420646578 x15: 0000000000000000 [ 6.819619] x14: ffffffffffffffff x13: 0000000000000030 x12: 0101010101010101 [ 6.819622] x11: ffff000081f6a818 x10: 0000000000000000 x9 : ffffbcca717c25a8 [ 6.819625] x8 : ffff8000819cf4d8 x7 : fefefefefefefefe x6 : 0000000000000001 [ 6.819629] x5 : ffffffffffffffc8 x4 : 00000000c0000000 x3 : ffffbcca3f011058 [ 6.826580] remoteproc remoteproc0: Direct firmware load for qcom/sdm845/adsp.mbn failed with error -2 [ 6.831824] x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff000091200870 [ 6.831828] Call trace: [ 6.831830] ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom] (P) [ 6.831836] ufshcd_setup_clocks+0x68/0x4c8 [ 6.833722] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 6.833735] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 6.833903] xhci-hcd xhci-hcd.0.auto: hcc params 0x0230fe65 hci version 0x110 quirks 0x0000808002000010 [ 6.833943] xhci-hcd xhci-hcd.0.auto: irq 171, io mem 0x0a800000 [ 6.834054] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 6.834059] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 6.834065] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed [ 6.834427] hub 1-0:1.0: USB hub found [ 6.834447] hub 1-0:1.0: 1 port detected [ 6.834649] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 6.834898] hub 2-0:1.0: USB hub found [ 6.834914] hub 2-0:1.0: 1 port detected [ 7.168856] ufshcd_init+0x278/0xff8 [ 7.172473] ufshcd_pltfrm_init+0x558/0x878 [ 7.176699] ufs_qcom_probe+0x28/0x68 [ufs_qcom] [ 7.181355] platform_probe+0x70/0xd8 [ 7.185058] really_probe+0xc8/0x3a0 [ 7.188672] __driver_probe_device+0x84/0x170 [ 7.193068] driver_probe_device+0x44/0x120 [ 7.197292] __driver_attach+0xf8/0x208 [ 7.201164] bus_for_each_dev+0x90/0xf8 [ 7.205035] driver_attach+0x2c/0x40 [ 7.208648] bus_add_driver+0x118/0x248 [ 7.212518] driver_register+0x64/0x138 [ 7.216389] __platform_driver_register+0x2c/0x40 [ 7.221139] ufs_qcom_pltform_init+0x28/0xfff8 [ufs_qcom] [ 7.226588] do_one_initcall+0x60/0x290 [ 7.230461] do_init_module+0x60/0x268 [ 7.234247] load_module+0x1fa4/0x2098 [ 7.238033] init_module_from_file+0x90/0xe0 [ 7.242344] __arm64_sys_finit_module+0x270/0x370 [ 7.247084] invoke_syscall.constprop.0+0x58/0xf8 [ 7.251826] do_el0_svc+0x48/0xd8 [ 7.255173] el0_svc+0x44/0x190 [ 7.258350] el0t_64_sync_handler+0x10c/0x138 [ 7.262745] el0t_64_sync+0x198/0x1a0 [ 7.266447] Code: a90157f3 aa0003f3 f90013f6 f9405c15 (f94002b6) [ 7.272592] ---[ end trace 0000000000000000 ]---
Failure - lava - job
(no logs available)
Failure - lava - fastboot-boot
(no logs available)
Failure - lava - auto-login-action
(no logs available)
Failure - lava - login-action
(no logs available)
Failure - boot - gcc-13-lkftconfig-64k_page_size
(no logs available)