Hay
Date
June 25, 2025, 8:08 a.m.
Failure - log-parser-boot - internal-error-oops-oops-smp
[    6.542061] Internal error: Oops: 0000000096000007 [#1]  SMP
[    6.542064] Modules linked in: i2c_qcom_geni pwrseq_core spi_geni_qcom videobuf2_common phy_qcom_qmp_usb
[    6.549444] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[    6.553217]  qcrypto typec gpi qcom_rng ufs_qcom(+)
[    6.559247] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[    6.564541]  stm_core qcom_q6v5_mss phy_qcom_qmp_ufs qrtr icc_osm_l3
[    6.572849] pci 0000:00:00.0: Adding to iommu group 16
[    6.577699]  cfg80211 pdr_interface qcom_pdr_msg qcom_wdt qcom_q6v5_pas(+) lmh phy_qcom_qmp_pcie rfkill qcom_pil_info
[    6.583288] pci 0000:01:00.0: [1912:0014] type 00 class 0x0c0330 PCIe Endpoint
[    6.586925]  display_connector drm_kms_helper icc_bwmon llcc_qcom qcom_q6v5 drm qcom_sysmon qcom_common
[    6.590418] pci 0000:01:00.0: BAR 0 [mem 0x00000000-0x00001fff 64bit]
[    6.595011]  backlight qcom_glink_smem mdt_loader qmi_helpers socinfo
[    6.598450] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    6.604757]  rmtfs_mem
[    6.604762] CPU: 6 UID: 0 PID: 355 Comm: (udev-worker) Not tainted 6.16.0-rc3-next-20250625 #1 PREEMPT 
[    6.610858] pci 0000:01:00.0: Adding to iommu group 16
[    6.615380] Hardware name: Thundercomm Dragonboard 845c (DT)
[    6.615382] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.615384] pc : ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom]
[    6.629837] pci 0000:00:00.0: bridge window [mem 0x60300000-0x603fffff]: assigned
[    6.630046] qcom-pcie 1c08000.pcie: PCI host bridge to bus 0001:00
[    6.630053] pci_bus 0001:00: root bus resource [bus 00-ff]
[    6.630058] pci_bus 0001:00: root bus resource [io  0x100000-0x1fffff] (bus address [0x0000-0xfffff])
[    6.630061] pci_bus 0001:00: root bus resource [mem 0x40300000-0x5fffffff]
[    6.630246] pci 0001:00:00.0: [17cb:0107] type 01 class 0x060400 PCIe Root Port
[    6.630265] pci 0001:00:00.0: BAR 0 [mem 0x00000000-0x00000fff]
[    6.630271] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[    6.630279] pci 0001:00:00.0:   bridge window [io  0x100000-0x100fff]
[    6.630283] pci 0001:00:00.0:   bridge window [mem 0x00000000-0x000fffff]
[    6.630292] pci 0001:00:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[    6.630355] pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
[    6.630612] pci 0001:00:00.0: Adding to iommu group 17
[    6.632814] pci 0001:00:00.0: BAR 0 [mem 0x40300000-0x40300fff]: assigned
[    6.632823] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[    6.632831] pci_bus 0001:00: resource 4 [io  0x100000-0x1fffff]
[    6.632835] pci_bus 0001:00: resource 5 [mem 0x40300000-0x5fffffff]
[    6.634126] pcieport 0001:00:00.0: PME: Signaling with IRQ 167
[    6.635080] pcieport 0001:00:00.0: AER: enabled with IRQ 167
[    6.639924] lr : ufshcd_setup_clocks+0x68/0x4c8
[    6.643587] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    6.643598] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[    6.643738] xhci-hcd xhci-hcd.0.auto: hcc params 0x0230fe65 hci version 0x110 quirks 0x0000808002000010
[    6.643771] xhci-hcd xhci-hcd.0.auto: irq 168, io mem 0x0a800000
[    6.643876] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    6.643881] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[    6.643887] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[    6.644423] hub 1-0:1.0: USB hub found
[    6.644439] hub 1-0:1.0: 1 port detected
[    6.644613] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    6.644992] hub 2-0:1.0: USB hub found
[    6.645006] hub 2-0:1.0: 1 port detected
[    6.645641] pci 0000:00:00.0: BAR 0 [mem 0x60400000-0x60400fff]: assigned
[    6.655176] sp : ffff80008606f660
[    6.655178] x29: ffff80008606f660 x28: 0000000000000001 x27: ffff000081f8f270
[    6.655182] x26: ffff000081f8f2a0
[    6.662993] pci 0000:01:00.0: BAR 0 [mem 0x60300000-0x60301fff 64bit]: assigned
[    6.667896]  x25: ffff000081f8e870 x24: 0000000000000000
[    6.667898] x23: ffff000081f8f280 x22: ffff000081f8f2a0 x21: 0000000000000000
[    6.674107] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    6.680445] 
[    6.680446] x20: ffffab1988aa3a88 x19: ffff000081f8e870 x18: 0000000000000000
[    6.680450] x17: 6c202c4b34206e67 x16: 696c61202c626920
[    6.685635] pci 0000:00:00.0:   bridge window [mem 0x60300000-0x603fffff]
[    6.696307]  x15: 0000000000000000
[    6.696309] x14: ffffffffffffffff x13: 0000000000000030 x12: 0101010101010101
[    6.696312] x11: ffff00008224a218
[    6.703595] pci_bus 0000:00: resource 4 [io  0x0000-0xfffff]
[    6.713039]  x10: 0000000000000000 x9 : ffffab19869c25a8
[    6.713042] x8 : ffff80008606f4d8 x7 : fefefefefefefefe x6 : 0000000000000001
[    6.719534] pci_bus 0000:00: resource 5 [mem 0x60300000-0x60ffffff]
[    6.726017] 
[    6.726018] x5 : ffffffffffffffc8 x4 : 00000000c0000000 x3 : ffffab197fb31058
[    6.726021] x2 : 0000000000000000
[    6.732162] pci_bus 0000:01: resource 1 [mem 0x60300000-0x603fffff]
[    6.734537]  x1 : 0000000000000001 x0 : ffff000081f8e870
[    6.734541] Call trace:
[    6.745320] pcieport 0000:00:00.0: PME: Signaling with IRQ 170
[    6.749176]  ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom] (P)
[    6.749182]  ufshcd_setup_clocks+0x68/0x4c8
[    6.755379] pcieport 0000:00:00.0: AER: enabled with IRQ 170
[    6.761903]  ufshcd_init+0x278/0xff8
[    6.761907]  ufshcd_pltfrm_init+0x558/0x878
[    6.761911]  ufs_qcom_probe+0x28/0x68 [ufs_qcom]
[    6.767798] pci 0000:01:00.0: enabling device (0000 -> 0002)
[    6.775155]  platform_probe+0x70/0xd8
[    6.775161]  really_probe+0xc8/0x3a0
[    6.781457] pci 0000:01:00.0: quirk_usb_early_handoff+0x0/0xa40 took 13360 usecs
[    6.786913]  __driver_probe_device+0x84/0x170
[    6.786916]  driver_probe_device+0x44/0x120
[    6.797744] remoteproc remoteproc0: adsp is available
[    6.803128]  __driver_attach+0xf8/0x208
[    6.803131]  bus_for_each_dev+0x90/0xf8
[    6.803133]  driver_attach+0x2c/0x40
[    6.803136]  bus_add_driver+0x118/0x248
[    6.803138]  driver_register+0x64/0x138
[    6.803140]  __platform_driver_register+0x2c/0x40
[    6.803143]  ufs_qcom_pltform_init+0x28/0xfff8 [ufs_qcom]
[    6.803148]  do_one_initcall+0x60/0x290
[    6.810675] remoteproc remoteproc0: Direct firmware load for qcom/sdm845/adsp.mbn failed with error -2
[    6.816472]  do_init_module+0x60/0x268
[    6.816477]  load_module+0x1fa4/0x2098
[    6.816479]  init_module_from_file+0x90/0xe0
[    6.816482]  __arm64_sys_finit_module+0x270/0x370
[    6.816485]  invoke_syscall.constprop.0+0x58/0xf8
[    6.816490]  do_el0_svc+0x48/0xd8
[    6.816494]  el0_svc+0x44/0x190
[    6.824078] remoteproc remoteproc1: cdsp is available
[    6.828247]  el0t_64_sync_handler+0x10c/0x138
[    6.828250]  el0t_64_sync+0x198/0x1a0
[    6.828254] Code: a90157f3 aa0003f3 f90013f6 f9405c15 (f94002b6) 
[    6.828257] ---[ end trace 0000000000000000 ]---
Failure - lava - job
(no logs available)
Failure - lava - fastboot-boot
(no logs available)
Failure - lava - auto-login-action
(no logs available)
Failure - lava - login-action
(no logs available)
Failure - boot - gcc-13-lkftconfig-64k_page_size
(no logs available)