Hay
Date
June 26, 2025, 9:10 a.m.
Failure - lava - job
(no logs available)
Failure - lava - fastboot-boot
(no logs available)
Failure - lava - auto-login-action
(no logs available)
Failure - lava - login-action
(no logs available)
Failure - boot - gcc-13-lkftconfig-libgpiod
(no logs available)
Failure - log-parser-boot - internal-error-oops-oops-smp KNOWN ISSUE - LKFT: Dragonboard 845c: Internal error: Oops: ufs_qcom_setup_clocks
[    6.581184] Internal error: Oops: 0000000096000006 [#1]  SMP
[    6.581187] Modules linked in: reset_qcom_pdc(+) camcc_sdm845 drm_client_lib i2c_qcom_geni(+) phy_qcom_qmp_usb pwrseq_core spi_geni_qcom videobuf2_common typec gpi qcom_rng qrtr stm_core
[    6.581578] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    6.582521] pci 0000:01:00.0: Adding to iommu group 16
[    6.582851] pci 0000:00:00.0: bridge window [mem 0x60300000-0x603fffff]: assigned
[    6.582863] pci 0000:00:00.0: BAR 0 [mem 0x60400000-0x60400fff]: assigned
[    6.582881] pci 0000:01:00.0: BAR 0 [mem 0x60300000-0x60301fff 64bit]: assigned
[    6.582957] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    6.582973] pci 0000:00:00.0:   bridge window [mem 0x60300000-0x603fffff]
[    6.582995] pci_bus 0000:00: resource 4 [io  0x0000-0xfffff]
[    6.583003] pci_bus 0000:00: resource 5 [mem 0x60300000-0x60ffffff]
[    6.583011] pci_bus 0000:01: resource 1 [mem 0x60300000-0x603fffff]
[    6.586510] pcieport 0000:00:00.0: PME: Signaling with IRQ 159
[    6.586927] pcieport 0000:00:00.0: AER: enabled with IRQ 159
[    6.587329] pci 0000:01:00.0: enabling device (0000 -> 0002)
[    6.590656] cpu cpu4: EM: created perf domain
[    6.594698]  qcom_q6v5_mss cfg80211 phy_qcom_qmp_ufs rfkill lmh qcrypto icc_osm_l3 ufs_qcom(+)
[    6.599630] energy_model: updating cpu0 cpu_cap=407 old capacity=611
[    6.604541]  phy_qcom_qmp_pcie slim_qcom_ngd_ctrl(+) slimbus qcom_q6v5_pas(+) pdr_interface qcom_pdr_msg
[    6.608941] cpu cpu0: EM: OPP:576000 is inefficient
[    6.609212] pci 0000:01:00.0: quirk_usb_early_handoff+0x0/0xa58 took 21392 usecs
[    6.612098]  qcom_wdt qcom_pil_info qcom_q6v5 qcom_sysmon qcom_common llcc_qcom display_connector drm_kms_helper
[    6.617289] cpu cpu0: EM: OPP:480000 is inefficient
[    6.624993]  icc_bwmon drm qcom_glink_smem mdt_loader qmi_helpers
[    6.629922] cpu cpu0: EM: OPP:403200 is inefficient
[    6.642257]  backlight socinfo rmtfs_mem
[    6.642264] CPU: 5 UID: 0 PID: 371 Comm: (udev-worker) Not tainted 6.16.0-rc3-next-20250626 #1 PREEMPT 
[    6.654608] cpu cpu0: EM: OPP:300000 is inefficient
[    6.666941] Hardware name: Thundercomm Dragonboard 845c (DT)
[    6.666943] pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.666946] pc : ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom]
[    6.687041] remoteproc remoteproc1: 4080000.remoteproc is available
[    6.690756] lr : ufshcd_setup_clocks+0x68/0x4c8
[    6.690764] sp : ffff80008121b640
[    6.690765] x29: ffff80008121b640 x28: 0000000000000001 x27: ffff00008c1d3270
[    6.703803] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    6.708844] x26: ffff00008c1d32a0 x25: ffff00008c1d2870 x24: 0000000000000000
[    6.708847] x23: ffff00008c1d3280 x22: ffff00008c1d32a0 x21: 0000000000000000
[    6.708851] x20: ffffaa3c9de6fa98 x19: ffff00008c1d2870 x18: 0000000000000000
[    6.708854] x17: 20796d6d75642067 x16: 6e697375202c646e
[    6.715790] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[    6.723138]  x15: 0000000000000100
[    6.723139] x14: ffffffffffffffff x13: 0000000000000030 x12: 0101010101010101
[    6.723143] x11: ffff000080245618 x10: 0000000000000000 x9 : ffffaa3c9bfda8b0
[    6.729257] xhci-hcd xhci-hcd.0.auto: hcc params 0x0230fe65 hci version 0x110 quirks 0x0000808002000010
[    6.734383] 
[    6.734384] x8 : ffff80008121b4b8 x7 : fefefefefefefefe x6 : 0000000000000001
[    6.734387] x5 : ffffffffffffffc8 x4 : 00000000c0000000 x3 : ffffaa3c5eaae058
[    6.740567] xhci-hcd xhci-hcd.0.auto: irq 167, io mem 0x0a800000
[    6.747360] x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff00008c1d2870
[    6.747365] Call trace:
[    6.747366]  ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom] (P)
[    6.755306] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    6.761298]  ufshcd_setup_clocks+0x68/0x4c8
[    6.761301]  ufshcd_init+0x278/0xff8
[    6.761305]  ufshcd_pltfrm_init+0x558/0x878
[    6.766494] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[    6.773757]  ufs_qcom_probe+0x28/0x68 [ufs_qcom]
[    6.773761]  platform_probe+0x70/0xd8
[    6.780257] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[    6.783148]  really_probe+0xc8/0x3a0
[    6.783152]  __driver_probe_device+0x84/0x170
[    6.783154]  driver_probe_device+0x44/0x120
[    6.783156]  __driver_attach+0xf8/0x208
[    6.789344] hub 1-0:1.0: USB hub found
[    6.793773]  bus_for_each_dev+0x90/0xf8
[    6.793775]  driver_attach+0x2c/0x40
[    6.793778]  bus_add_driver+0x118/0x248
[    6.793780]  driver_register+0x64/0x138
[    6.793783]  __platform_driver_register+0x2c/0x40
[    6.799151] hub 1-0:1.0: 1 port detected
[    6.805622]  ufs_qcom_pltform_init+0x28/0xff8 [ufs_qcom]
[    6.805627]  do_one_initcall+0x60/0x290
[    6.816508] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    6.822008]  do_init_module+0x60/0x268
[    6.822013]  load_module+0x1f30/0x2050
[    6.822016]  init_module_from_file+0x90/0xe0
[    6.839162] hub 2-0:1.0: USB hub found
[    6.844856]  __arm64_sys_finit_module+0x270/0x370
[    6.844860]  invoke_syscall+0x50/0x120
[    6.844862]  el0_svc_common.constprop.0+0x48/0xf0
[    6.844865]  do_el0_svc+0x24/0x38
[    6.850060] hub 2-0:1.0: 1 port detected
[    6.857581]  el0_svc+0x3c/0x130
[    6.857587]  el0t_64_sync_handler+0x10c/0x138
[    7.295060]  el0t_64_sync+0x198/0x1a0
[    7.298761] Code: a90157f3 aa0003f3 f90013f6 f9405c15 (f94002b6) 
[    7.304899] ---[ end trace 0000000000000000 ]---