(no logs available)

(no logs available)

(no logs available)

(no logs available)

(no logs available)

[    5.951416] Internal error: Oops: 0000000096000006 [#1]  SMP
[    5.955519] pci 0000:01:00.0: Adding to iommu group 16
[    5.957671] Modules linked in:
[    5.964398] pcieport 0000:00:00.0: bridge window [mem 0x60400000-0x604fffff]: assigned
[    5.968988]  i2c_qcom_geni pwrseq_core camcc_sdm845 videobuf2_common spi_geni_qcom phy_qcom_qmp_usb typec gpi qcom_rng qcom_q6v5_mss qrtr stm_core
[    5.973927] pci 0000:01:00.0: BAR 0 [mem 0x60400000-0x60401fff 64bit]: assigned
[    5.978828]  cfg80211 slim_qcom_ngd_ctrl(+) rfkill ufs_qcom(+) qcrypto phy_qcom_qmp_pcie phy_qcom_qmp_ufs lmh slimbus
[    5.983857] pci 0000:01:00.0: enabling device (0000 -> 0002)
[    5.988660]  qcom_q6v5_pas(+) icc_osm_l3 pdr_interface qcom_pil_info qcom_q6v5 qcom_wdt qcom_pdr_msg qcom_sysmon display_connector qcom_common
[    5.994300] pci 0000:01:00.0: quirk_usb_early_handoff+0x0/0xa58 took 10221 usecs
[    5.997106]  qcom_glink_smem llcc_qcom icc_bwmon drm_kms_helper mdt_loader qmi_helpers drm backlight socinfo rmtfs_mem
[    6.006810] pcieport 0001:00:00.0: PME: Signaling with IRQ 163
[    6.010350] 
[    6.010354] CPU: 5 UID: 0 PID: 355 Comm: (udev-worker) Not tainted 6.16.0-rc3-next-20250626 #1 PREEMPT 
[    6.010358] Hardware name: Thundercomm Dragonboard 845c (DT)
[    6.010360] pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.020633] pcieport 0001:00:00.0: AER: enabled with IRQ 163
[    6.024911] pc : ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom]
[    6.024920] lr : ufshcd_setup_clocks+0x68/0x4c8
[    6.032321] remoteproc remoteproc0: adsp is available
[    6.042621] sp : ffff8000812fb640
[    6.042622] x29: ffff8000812fb640 x28: 0000000000000001 x27: ffff00008b761270
[    6.042626] x26: ffff00008b7612a0 x25: ffff00008b760870 x24: 0000000000000000
[    6.042630] x23: ffff00008b761280 x22: ffff00008b7612a0 x21: 0000000000000000
[    6.042633] x20: ffffd5a70026fa98 x19: ffff00008b760870 x18: 0000000000000000
[    6.042637] x17: 20646e6966206f74 x16: 20656c62616e5520 x15: 0000000000000100
[    6.042640] x14: ffffffffffffffff x13: 0000000000000030 x12: 0101010101010101
[    6.042644] x11: ffff000080ce0c18 x10: 0000000000000000 x9 : ffffd5a6fe3d8030
[    6.042647] x8 : ffff8000812fb4b8 x7 : fefefefefefefefe x6 : 0000000000000001
[    6.042651] x5 : ffffffffffffffc8 x4 : 00000000c0000000 x3 : ffffd5a69cd1e058
[    6.042654] x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff00008b760870
[    6.042658] Call trace:
[    6.042660]  ufs_qcom_setup_clocks+0x28/0x148 [ufs_qcom] (P)
[    6.042667]  ufshcd_setup_clocks+0x68/0x4c8
[    6.055803] remoteproc remoteproc0: Direct firmware load for qcom/sdm845/adsp.mbn failed with error -2
[    6.057062] remoteproc remoteproc1: cdsp is available
[    6.058236] remoteproc remoteproc1: Direct firmware load for qcom/sdm845/cdsp.mbn failed with error -2
[    6.058252] remoteproc remoteproc1: powering up cdsp
[    6.058301] remoteproc remoteproc1: Direct firmware load for qcom/sdm845/cdsp.mbn failed with error -2
[    6.058314] remoteproc remoteproc1: request_firmware failed: -2
[    6.060615] remoteproc remoteproc2: slpi is available
[    6.060760] remoteproc remoteproc2: Direct firmware load for qcom/sdm845/Thundercomm/db845c/slpi.mbn failed with error -2
[    6.060774] remoteproc remoteproc2: powering up slpi
[    6.060825] remoteproc remoteproc2: Direct firmware load for qcom/sdm845/Thundercomm/db845c/slpi.mbn failed with error -2
[    6.060838] remoteproc remoteproc2: request_firmware failed: -2
[    6.067342]  ufshcd_init+0x278/0xff8
[    6.067347]  ufshcd_pltfrm_init+0x558/0x878
[    6.067351]  ufs_qcom_probe+0x28/0x68 [ufs_qcom]
[    6.067355]  platform_probe+0x70/0xd8
[    6.067361]  really_probe+0xc8/0x3a0
[    6.067363]  __driver_probe_device+0x84/0x170
[    6.079911] remoteproc remoteproc0: powering up adsp
[    6.085763]  driver_probe_device+0x44/0x120
[    6.085766]  __driver_attach+0xf8/0x208
[    6.085768]  bus_for_each_dev+0x90/0xf8
[    6.085771]  driver_attach+0x2c/0x40
[    6.085773]  bus_add_driver+0x118/0x248
[    6.085775]  driver_register+0x64/0x138
[    6.091363] remoteproc remoteproc0: Direct firmware load for qcom/sdm845/adsp.mbn failed with error -2
[    6.097792]  __platform_driver_register+0x2c/0x40
[    6.097795]  ufs_qcom_pltform_init+0x28/0xff8 [ufs_qcom]
[    6.097799]  do_one_initcall+0x60/0x290
[    6.105536] remoteproc remoteproc0: request_firmware failed: -2
[    6.111742]  do_init_module+0x60/0x268
[    6.111747]  load_module+0x1f30/0x2050
[    6.798156]  init_module_from_file+0x90/0xe0
[    6.802469]  __arm64_sys_finit_module+0x270/0x370
[    6.807209]  invoke_syscall+0x50/0x120
[    6.810994]  el0_svc_common.constprop.0+0x48/0xf0
[    6.815733]  do_el0_svc+0x24/0x38
[    6.819078]  el0_svc+0x3c/0x130
[    6.822255]  el0t_64_sync_handler+0x10c/0x138
[    6.826651]  el0t_64_sync+0x198/0x1a0
[    6.830353] Code: a90157f3 aa0003f3 f90013f6 f9405c15 (f94002b6) 
[    6.836499] ---[ end trace 0000000000000000 ]---