Date
May 8, 2025, 11:40 a.m.
Failure - kselftest-net - net_fib_rule_tests_sh
exit=2<LAVA_SIGNAL_ENDTC net_fib_rule_tests_sh> net_fib_rule_tests_sh fail
Failure - kselftest-net - net_ip_defrag_sh
exit=1timeout set to 3600 selftests: net: udpgso_bench.sh ipv4 tcp tcp tx: 444 MB/s 7532 calls/s 7532 msg/s tcp rx: 445 MB/s 7291 calls/s tcp tx: 323 MB/s 5487 calls/s 5487 msg/s tcp rx: 322 MB/s 5260 calls/s tcp tx: 414 MB/s 7027 calls/s 7027 msg/s tcp zerocopy tcp tx: 304 MB/s 5161 calls/s 5161 msg/s tcp rx: 305 MB/s 4255 calls/s tcp tx: 252 MB/s 4275 calls/s 4275 msg/s tcp rx: 254 MB/s 3292 calls/s tcp tx: 355 MB/s 6022 calls/s 6022 msg/s udp udp rx: 17 MB/s 12687 calls/s udp tx: 21 MB/s 15120 calls/s 360 msg/s udp rx: 12 MB/s 8736 calls/s udp tx: 11 MB/s 7938 calls/s 189 msg/s udp rx: 11 MB/s 8505 calls/s udp sendmmsg udp rx: 54 MB/s 38912 calls/s udp tx: 95 MB/s 68208 calls/s 1624 msg/s udp rx: 69 MB/s 49152 calls/s udp tx: 98 MB/s 70350 calls/s 1675 msg/s udp rx: 69 MB/s 49664 calls/s udp tx: 95 MB/s 67872 calls/s 1616 msg/s udp gso udp rx: 24 MB/s 17408 calls/s udp tx: 136 MB/s 2307 calls/s 2307 msg/s udp rx: 30 MB/s 21472 calls/s udp tx: 135 MB/s 2306 calls/s 2306 msg/s udp rx: 28 MB/s 20480 calls/s udp tx: 134 MB/s 2279 calls/s 2279 msg/s udp gso zerocopy udp rx: 20 MB/s 14848 calls/s udp tx: 114 MB/s 1940 calls/s 1940 msg/s udp rx: 27 MB/s 19911 calls/s udp tx: 116 MB/s 1974 calls/s 1974 msg/s udp rx: 27 MB/s 19567 calls/s udp tx: 114 MB/s 1938 calls/s 1938 msg/s udp gso timestamp udp rx: 49 MB/s 35328 calls/s udp tx: 197 MB/s 3354 calls/s 3354 msg/s udp rx: 34 MB/s 24318 calls/s udp tx: 102 MB/s 1733 calls/s 1733 msg/s udp rx: 29 MB/s 20799 calls/s udp tx: 104 MB/s 1764 calls/s 1764 msg/s udp gso zerocopy audit udp rx: 24 MB/s 17152 calls/s udp tx: 121 MB/s 2055 calls/s 2055 msg/s udp rx: 28 MB/s 20480 calls/s udp tx: 116 MB/s 1976 calls/s 1976 msg/s udp rx: 30 MB/s 21988 calls/s udp tx: 116 MB/s 1979 calls/s 1979 msg/s Summary over 3.000 seconds... sum udp tx: 120 MB/s 6010 calls (2003/s) 6010 msgs (2003/s) Zerocopy acks: 6010 udp gso timestamp audit udp rx: 50 MB/s 35840 calls/s udp tx: 183 MB/s 3117 calls/s 3117 msg/s udp rx: 31 MB/s 22528 calls/s udp tx: 104 MB/s 1766 calls/s 1766 msg/s udp rx: 30 MB/s 21650 calls/s udp tx: 107 MB/s 1830 calls/s 1830 msg/s Summary over 3.000 seconds... sum udp tx: 135 MB/s 6713 calls (2237/s) 6713 msgs (2237/s) Tx Timestamps: 6713 received 0 errors udp gso zerocopy timestamp audit udp rx: 31 MB/s 22784 calls/s udp tx: 108 MB/s 1840 calls/s 1840 msg/s udp rx: 28 MB/s 19968 calls/s udp tx: 87 MB/s 1477 calls/s 1477 msg/s udp rx: 29 MB/s 20992 calls/s udp tx: 84 MB/s 1438 calls/s 1438 msg/s Summary over 3.000 seconds... sum udp tx: 95 MB/s 4755 calls (1585/s) 4755 msgs (1585/s) Tx Timestamps: 4755 received 0 errors Zerocopy acks: 4755 ipv6 tcp tcp tx: 407 MB/s 6906 calls/s 6906 msg/s tcp rx: 407 MB/s 6646 calls/s tcp tx: 247 MB/s 4205 calls/s 4205 msg/s tcp rx: 250 MB/s 4079 calls/s tcp tx: 420 MB/s 7130 calls/s 7130 msg/s tcp zerocopy tcp tx: 432 MB/s 7332 calls/s 7332 msg/s tcp rx: 432 MB/s 4960 calls/s tcp tx: 417 MB/s 7087 calls/s 7087 msg/s tcp rx: 417 MB/s 4623 calls/s tcp tx: 331 MB/s 5630 calls/s 5630 msg/s udp udp rx: 9 MB/s 6777 calls/s udp tx: 11 MB/s 8256 calls/s 192 msg/s udp rx: 11 MB/s 8678 calls/s udp tx: 13 MB/s 9847 calls/s 229 msg/s udp rx: 15 MB/s 11333 calls/s udp tx: 13 MB/s 10148 calls/s 236 msg/s udp sendmmsg udp rx: 23 MB/s 16896 calls/s udp tx: 47 MB/s 34744 calls/s 808 msg/s udp rx: 30 MB/s 21929 calls/s udp tx: 47 MB/s 34314 calls/s 798 msg/s udp rx: 29 MB/s 21248 calls/s udp tx: 45 MB/s 33411 calls/s 777 msg/s udp gso udp rx: 22 MB/s 16640 calls/s udp tx: 133 MB/s 2268 calls/s 2268 msg/s udp rx: 28 MB/s 20992 calls/s udp tx: 133 MB/s 2258 calls/s 2258 msg/s udp rx: 40 MB/s 29184 calls/s udp tx: 175 MB/s 2974 calls/s 2974 msg/s udp gso zerocopy udp rx: 22 MB/s 16384 calls/s udp tx: 113 MB/s 1933 calls/s 1933 msg/s udp rx: 27 MB/s 19968 calls/s udp tx: 113 MB/s 1926 calls/s 1926 msg/s udp rx: 27 MB/s 20155 calls/s udp tx: 116 MB/s 1979 calls/s 1979 msg/s udp gso timestamp udp rx: 24 MB/s 18176 calls/s udp tx: 112 MB/s 1912 calls/s 1912 msg/s udp rx: 29 MB/s 21248 calls/s udp tx: 107 MB/s 1831 calls/s 1831 msg/s udp rx: 29 MB/s 21545 calls/s udp tx: 104 MB/s 1767 calls/s 1767 msg/s udp gso zerocopy audit udp rx: 21 MB/s 15872 calls/s udp tx: 116 MB/s 1976 calls/s 1976 msg/s udp rx: 28 MB/s 20480 calls/s udp tx: 112 MB/s 1906 calls/s 1906 msg/s udp rx: 26 MB/s 18944 calls/s udp tx: 115 MB/s 1956 calls/s 1956 msg/s Summary over 3.000 seconds... sum udp tx: 117 MB/s 5838 calls (1946/s) 5838 msgs (1946/s) Zerocopy acks: 5838 udp gso timestamp audit udp rx: 47 MB/s 34560 calls/s udp tx: 196 MB/s 3327 calls/s 3327 msg/s udp rx: 33 MB/s 24320 calls/s udp tx: 102 MB/s 1746 calls/s 1746 msg/s udp rx: 28 MB/s 20736 calls/s udp tx: 102 MB/s 1737 calls/s 1737 msg/s Summary over 3.000 seconds... sum udp tx: 137 MB/s 6810 calls (2270/s) 6810 msgs (2270/s) Tx Timestamps: 6810 received 0 errors udp gso zerocopy timestamp audit udp rx: 23 MB/s 17152 calls/s udp tx: 89 MB/s 1514 calls/s 1514 msg/s udp rx: 29 MB/s 21372 calls/s udp tx: 81 MB/s 1383 calls/s 1383 msg/s udp rx: 28 MB/s 20736 calls/s udp tx: 83 MB/s 1420 calls/s 1420 msg/s Summary over 3.000 seconds... sum udp tx: 86 MB/s 4317 calls (1439/s) 4317 msgs (1439/s) Tx Timestamps: 4317 received 0 errors Zerocopy acks: 4317 udpgso_bench.sh: PASS=20 SKIP=0 FAIL=0 udpgso_bench.sh: [0;92mPASS[0m net_ip_defrag_sh fail
Failure - kselftest-net - net_udpgso_sh
exit=1timeout set to 3600 selftests: net: ip_defrag.sh net_udpgso_sh fail
Failure - kselftest-net - net_fib_tests_sh
exit=2timeout set to 3600 selftests: net: fib-onlink-tests.sh Error: ipv4: FIB table does not exist. Flush terminated Error: ipv6: FIB table does not exist. Flush terminated ######################################## Configuring interfaces ###################################################################### TEST SECTION: IPv4 onlink ###################################################################### ######################################### TEST SUBSECTION: Valid onlink commands ######################################### TEST SUBSECTION: default VRF - main table TEST: unicast connected [ OK ] TEST: unicast recursive [ OK ] ######################################### TEST SUBSECTION: VRF lisa TEST: unicast connected [ OK ] TEST: unicast recursive [ OK ] ######################################### TEST SUBSECTION: VRF device, PBR table TEST: unicast connected [ OK ] TEST: unicast recursive [ OK ] ######################################### TEST SUBSECTION: default VRF - main table - multipath TEST: unicast connected - multipath [ OK ] TEST: unicast recursive - multipath [ OK ] TEST: unicast connected - multipath onlink first only [ OK ] TEST: unicast connected - multipath onlink second only [ OK ] ######################################### TEST SUBSECTION: Invalid onlink commands TEST: Invalid gw - local unicast address [ OK ] TEST: Invalid gw - local unicast address, VRF [ OK ] TEST: No nexthop device given [ OK ] TEST: Gateway resolves to wrong nexthop device [ OK ] TEST: Gateway resolves to wrong nexthop device - VRF [ OK ] ###################################################################### TEST SECTION: IPv6 onlink ###################################################################### ######################################### TEST SUBSECTION: Valid onlink commands ######################################### TEST SUBSECTION: default VRF - main table TEST: unicast connected [ OK ] TEST: unicast recursive [ OK ] TEST: v4-mapped [ OK ] ######################################### TEST SUBSECTION: VRF lisa TEST: unicast connected [ OK ] TEST: unicast recursive [ OK ] TEST: v4-mapped [ OK ] ######################################### TEST SUBSECTION: VRF device, PBR table TEST: unicast connected [ OK ] TEST: unicast recursive [ OK ] TEST: v4-mapped [ OK ] ######################################### TEST SUBSECTION: default VRF - main table - multipath TEST: unicast connected - multipath onlink [ OK ] TEST: unicast recursive - multipath onlink [ OK ] TEST: v4-mapped - multipath onlink [ OK ] TEST: unicast connected - multipath onlink both nexthops [ OK ] TEST: unicast connected - multipath onlink first only [ OK ] TEST: unicast connected - multipath onlink second only [ OK ] ######################################### TEST SUBSECTION: Invalid onlink commands TEST: Invalid gw - local unicast address [ OK ] TEST: Invalid gw - local linklocal address [ OK ] TEST: Invalid gw - multicast address [ OK ] TEST: Invalid gw - local unicast address, VRF [ OK ] TEST: Invalid gw - local linklocal address, VRF [ OK ] TEST: Invalid gw - multicast address, VRF [ OK ] TEST: No nexthop device given [ OK ] TEST: Gateway resolves to wrong nexthop device - VRF [ OK ] Tests passed: 38 Tests failed: 0 net_fib_tests_sh fail
Failure - kselftest-net - net_epoll_busy_poll
exit=1timeout set to 3600 selftests: net: sk_bind_sendto_listen net_epoll_busy_poll_invalid_fd_test_invalid_fd pass net_epoll_busy_poll_epoll_busy_poll_test_get_params fail net_epoll_busy_poll_epoll_busy_poll_test_set_invalid fail net_epoll_busy_poll_epoll_busy_poll_test_set_and_get_valid fail net_epoll_busy_poll_epoll_busy_poll_test_invalid_ioctl fail net_epoll_busy_poll fail
Failure - kselftest-net - net_epoll_busy_poll_epoll_busy_poll_test_invalid_ioctl
FAILED: 1 / 5 tests passed. Totals: pass:1 fail:4 xfail:0 xpass:0 skip:0 error:0 net_epoll_busy_poll_epoll_busy_poll_test_invalid_ioctl fail
Failure - kselftest-net - net_epoll_busy_poll_epoll_busy_poll_test_set_and_get_valid
RUN epoll_busy_poll.test_invalid_ioctl ... epoll_busy_poll.c:316:test_invalid_ioctl:Expected EINVAL (22) == errno (25) epoll_busy_poll.c:317:test_invalid_ioctl:invalid ioctl should set errno to EINVAL test_invalid_ioctl: Test failed FAIL epoll_busy_poll.test_invalid_ioctl net_epoll_busy_poll_epoll_busy_poll_test_set_and_get_valid fail
Failure - kselftest-net - net_epoll_busy_poll_epoll_busy_poll_test_set_invalid
RUN epoll_busy_poll.test_set_and_get_valid ... epoll_busy_poll.c:281:test_set_and_get_valid:Expected 0 (0) == ret (-1) epoll_busy_poll.c:282:test_set_and_get_valid:EPIOCSPARAMS with valid params should not error epoll_busy_poll.c:290:test_set_and_get_valid:Expected 0 (0) == ret (-1) epoll_busy_poll.c:291:test_set_and_get_valid:EPIOCGPARAMS should not error epoll_busy_poll.c:293:test_set_and_get_valid:Expected 25 (25) == self->params.busy_poll_usecs (0) epoll_busy_poll.c:294:test_set_and_get_valid:params.busy_poll_usecs incorrect epoll_busy_poll.c:296:test_set_and_get_valid:Expected 16 (16) == self->params.busy_poll_budget (0) epoll_busy_poll.c:297:test_set_and_get_valid:params.busy_poll_budget incorrect epoll_busy_poll.c:299:test_set_and_get_valid:Expected 1 (1) == self->params.prefer_busy_poll (0) epoll_busy_poll.c:300:test_set_and_get_valid:params.prefer_busy_poll incorrect test_set_and_get_valid: Test failed FAIL epoll_busy_poll.test_set_and_get_valid net_epoll_busy_poll_epoll_busy_poll_test_set_invalid fail
Failure - kselftest-net - net_epoll_busy_poll_epoll_busy_poll_test_get_params
RUN epoll_busy_poll.test_set_invalid ... epoll_busy_poll.c:179:test_set_invalid:Expected EINVAL (22) == errno (25) epoll_busy_poll.c:180:test_set_invalid:EPIOCSPARAMS non-zero __pad errno should be EINVAL epoll_busy_poll.c:190:test_set_invalid:Expected EINVAL (22) == errno (25) epoll_busy_poll.c:191:test_set_invalid:EPIOCSPARAMS busy_poll_usecs > S32_MAX errno should be EINVAL epoll_busy_poll.c:202:test_set_invalid:Expected EINVAL (22) == errno (25) epoll_busy_poll.c:203:test_set_invalid:EPIOCSPARAMS prefer_busy_poll > 1 errno should be EINVAL epoll_busy_poll.c:227:test_set_invalid:Expected 0 (0) == ret (-1) epoll_busy_poll.c:228:test_set_invalid:EPIOCSPARAMS should allow busy_poll_budget > NAPI_POLL_WEIGHT epoll_busy_poll.c:247:test_set_invalid:Expected EPERM (1) == errno (25) epoll_busy_poll.c:248:test_set_invalid:EPIOCSPARAMS errno should be EPERM busy_poll_budget > NAPI_POLL_WEIGHT epoll_busy_poll.c:265:test_set_invalid:Expected EFAULT (14) == errno (25) epoll_busy_poll.c:266:test_set_invalid:EPIOCSPARAMS should set errno to EFAULT when epoll_params is invalid test_set_invalid: Test failed FAIL epoll_busy_poll.test_set_invalid net_epoll_busy_poll_epoll_busy_poll_test_get_params fail
Failure - kselftest-net - net_tap
exit=1timeout set to 3600 selftests: net: epoll_busy_poll TAP version 13 1..5 # Starting 5 tests from 2 test cases. # RUN invalid_fd.test_invalid_fd ... # OK invalid_fd.test_invalid_fd ok 1 invalid_fd.test_invalid_fd # RUN epoll_busy_poll.test_get_params ... # epoll_busy_poll.c:141:test_get_params:Expected 0 (0) == ret (-1) # epoll_busy_poll.c:142:test_get_params:ioctl EPIOCGPARAMS should succeed # epoll_busy_poll.c:144:test_get_params:Expected 0 (0) == self->params.busy_poll_usecs (255) # epoll_busy_poll.c:145:test_get_params:EPIOCGPARAMS busy_poll_usecs should have been 0 # epoll_busy_poll.c:147:test_get_params:Expected 0 (0) == self->params.busy_poll_budget (255) # epoll_busy_poll.c:148:test_get_params:EPIOCGPARAMS busy_poll_budget should have been 0 # epoll_busy_poll.c:150:test_get_params:Expected 0 (0) == self->params.prefer_busy_poll (1) # epoll_busy_poll.c:151:test_get_params:EPIOCGPARAMS prefer_busy_poll should have been 0 # epoll_busy_poll.c:153:test_get_params:Expected 0 (0) == self->params.__pad (15) # epoll_busy_poll.c:154:test_get_params:EPIOCGPARAMS __pad should have been 0 # epoll_busy_poll.c:162:test_get_params:Expected EFAULT (14) == errno (25) # epoll_busy_poll.c:163:test_get_params:EPIOCGPARAMS with invalid params should set errno to EFAULT # test_get_params: Test failed # FAIL epoll_busy_poll.test_get_params not ok 2 epoll_busy_poll.test_get_params # RUN epoll_busy_poll.test_set_invalid ... # epoll_busy_poll.c:179:test_set_invalid:Expected EINVAL (22) == errno (25) # epoll_busy_poll.c:180:test_set_invalid:EPIOCSPARAMS non-zero __pad errno should be EINVAL # epoll_busy_poll.c:190:test_set_invalid:Expected EINVAL (22) == errno (25) # epoll_busy_poll.c:191:test_set_invalid:EPIOCSPARAMS busy_poll_usecs > S32_MAX errno should be EINVAL # epoll_busy_poll.c:202:test_set_invalid:Expected EINVAL (22) == errno (25) # epoll_busy_poll.c:203:test_set_invalid:EPIOCSPARAMS prefer_busy_poll > 1 errno should be EINVAL # epoll_busy_poll.c:227:test_set_invalid:Expected 0 (0) == ret (-1) # epoll_busy_poll.c:228:test_set_invalid:EPIOCSPARAMS should allow busy_poll_budget > NAPI_POLL_WEIGHT # epoll_busy_poll.c:247:test_set_invalid:Expected EPERM (1) == errno (25) # epoll_busy_poll.c:248:test_set_invalid:EPIOCSPARAMS errno should be EPERM busy_poll_budget > NAPI_POLL_WEIGHT # epoll_busy_poll.c:265:test_set_invalid:Expected EFAULT (14) == errno (25) # epoll_busy_poll.c:266:test_set_invalid:EPIOCSPARAMS should set errno to EFAULT when epoll_params is invalid # test_set_invalid: Test failed # FAIL epoll_busy_poll.test_set_invalid not ok 3 epoll_busy_poll.test_set_invalid # RUN epoll_busy_poll.test_set_and_get_valid ... # epoll_busy_poll.c:281:test_set_and_get_valid:Expected 0 (0) == ret (-1) # epoll_busy_poll.c:282:test_set_and_get_valid:EPIOCSPARAMS with valid params should not error # epoll_busy_poll.c:290:test_set_and_get_valid:Expected 0 (0) == ret (-1) # epoll_busy_poll.c:291:test_set_and_get_valid:EPIOCGPARAMS should not error # epoll_busy_poll.c:293:test_set_and_get_valid:Expected 25 (25) == self->params.busy_poll_usecs (0) # epoll_busy_poll.c:294:test_set_and_get_valid:params.busy_poll_usecs incorrect # epoll_busy_poll.c:296:test_set_and_get_valid:Expected 16 (16) == self->params.busy_poll_budget (0) # epoll_busy_poll.c:297:test_set_and_get_valid:params.busy_poll_budget incorrect # epoll_busy_poll.c:299:test_set_and_get_valid:Expected 1 (1) == self->params.prefer_busy_poll (0) # epoll_busy_poll.c:300:test_set_and_get_valid:params.prefer_busy_poll incorrect # test_set_and_get_valid: Test failed # FAIL epoll_busy_poll.test_set_and_get_valid not ok 4 epoll_busy_poll.test_set_and_get_valid # RUN epoll_busy_poll.test_invalid_ioctl ... # epoll_busy_poll.c:316:test_invalid_ioctl:Expected EINVAL (22) == errno (25) # epoll_busy_poll.c:317:test_invalid_ioctl:invalid ioctl should set errno to EINVAL # test_invalid_ioctl: Test failed # FAIL epoll_busy_poll.test_invalid_ioctl not ok 5 epoll_busy_poll.test_invalid_ioctl # FAILED: 1 / 5 tests passed. # Totals: pass:1 fail:4 xfail:0 xpass:0 skip:0 error:0 net_tap_tap_test_packet_valid_udp_gso fail net_tap_tap_test_packet_valid_udp_csum fail net_tap_tap_test_packet_crash_tap_invalid_eth_proto fail net_tap fail
Failure - kselftest-net - net_tap_tap_test_packet_crash_tap_invalid_eth_proto
FAILED: 0 / 3 tests passed. Totals: pass:0 fail:3 xfail:0 xpass:0 skip:0 error:0 net_tap_tap_test_packet_crash_tap_invalid_eth_proto fail
Failure - kselftest-net - net_tap_tap_test_packet_valid_udp_csum
RUN tap.test_packet_crash_tap_invalid_eth_proto ... tap.c:380:test_packet_crash_tap_invalid_eth_proto:Expected self->fd (-19) >= 0 (0) test_packet_crash_tap_invalid_eth_proto: Test terminated by assertion FAIL tap.test_packet_crash_tap_invalid_eth_proto net_tap_tap_test_packet_valid_udp_csum fail
Failure - kselftest-net - net_tap_tap_test_packet_valid_udp_gso
RUN tap.test_packet_valid_udp_csum ... tap.c:380:test_packet_valid_udp_csum:Expected self->fd (-19) >= 0 (0) test_packet_valid_udp_csum: Test terminated by assertion FAIL tap.test_packet_valid_udp_csum net_tap_tap_test_packet_valid_udp_gso fail
Failure - kselftest-net - net_tun
exit=1timeout set to 3600 selftests: net: tap TAP version 13 1..3 # Starting 3 tests from 1 test cases. # RUN tap.test_packet_valid_udp_gso ... opentap: ifindex No such device # tap.c:380:test_packet_valid_udp_gso:Expected self->fd (-19) >= 0 (0) # test_packet_valid_udp_gso: Test terminated by assertion # FAIL tap.test_packet_valid_udp_gso not ok 1 tap.test_packet_valid_udp_gso # RUN tap.test_packet_valid_udp_csum ... opentap: ifindex No such device # tap.c:380:test_packet_valid_udp_csum:Expected self->fd (-19) >= 0 (0) # test_packet_valid_udp_csum: Test terminated by assertion # FAIL tap.test_packet_valid_udp_csum not ok 2 tap.test_packet_valid_udp_csum # RUN tap.test_packet_crash_tap_invalid_eth_proto ... opentap: ifindex No such device # tap.c:380:test_packet_crash_tap_invalid_eth_proto:Expected self->fd (-19) >= 0 (0) # test_packet_crash_tap_invalid_eth_proto: Test terminated by assertion # FAIL tap.test_packet_crash_tap_invalid_eth_proto not ok 3 tap.test_packet_crash_tap_invalid_eth_proto # FAILED: 0 / 3 tests passed. # Totals: pass:0 fail:3 xfail:0 xpass:0 skip:0 error:0 net_tun_tun_delete_detach_close fail net_tun_tun_detach_delete_close fail net_tun_tun_detach_close_delete fail net_tun_tun_reattach_delete_close fail net_tun_tun_reattach_close_delete fail net_tun fail
Failure - kselftest-net - net_tun_tun_reattach_close_delete
FAILED: 0 / 5 tests passed. Totals: pass:0 fail:5 xfail:0 xpass:0 skip:0 error:0 net_tun_tun_reattach_close_delete fail
Failure - kselftest-net - net_tun_tun_reattach_delete_close
RUN tun.reattach_close_delete ... tun.c:116:reattach_close_delete:Expected self->fd (-1) >= 0 (0) reattach_close_delete: Test terminated by assertion FAIL tun.reattach_close_delete net_tun_tun_reattach_delete_close fail
Failure - kselftest-net - net_tun_tun_detach_close_delete
RUN tun.reattach_delete_close ... tun.c:116:reattach_delete_close:Expected self->fd (-1) >= 0 (0) reattach_delete_close: Test terminated by assertion FAIL tun.reattach_delete_close net_tun_tun_detach_close_delete fail
Failure - kselftest-net - net_tun_tun_detach_delete_close
RUN tun.detach_close_delete ... tun.c:116:detach_close_delete:Expected self->fd (-1) >= 0 (0) detach_close_delete: Test terminated by assertion FAIL tun.detach_close_delete net_tun_tun_detach_delete_close fail
Failure - kselftest-net - net_tun_tun_delete_detach_close
RUN tun.detach_delete_close ... tun.c:116:detach_delete_close:Expected self->fd (-1) >= 0 (0) detach_delete_close: Test terminated by assertion FAIL tun.detach_delete_close net_tun_tun_delete_detach_close fail