------------[ cut here ]------------
[    3.974583] WARNING: CPU: 1 PID: 102 at drivers/regulator/core.c:2395 regulator_put+0x78/0x88
[    3.979367] Modules linked in:
[    3.979938] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    3.986888] sdhci_msm 7864900.mmc: Got CD GPIO
[    3.987762] CPU: 1 UID: 0 PID: 102 Comm: kworker/u16:4 Not tainted 6.12.33-rc1 #1
[    3.987775] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
[    3.987782] Workqueue: async async_run_entry_fn
[    3.993106] clk: Disabling unused clocks
[    3.997572] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    3.997584] pc : regulator_put+0x78/0x88
[    4.002528] PM: genpd: Disabling unused power domains
[    4.009380] lr : regulator_put+0x2c/0x88
[    4.009391] sp : ffff800083ddba50
[    4.009396] x29: ffff800083ddba50 x28: 0000000000000000 x27: ffff800081b2f208
[    4.009411] x26: ffff800081b2f1c8 x25: 0000000000000001 x24: 00000000aaaaaaaa
[    4.009426] x23: ffff000004644e80 x22: ffff0000045d8800
[    4.016300] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync cx: -1431655766
[    4.020400]  x21: ffff0000045d8800
[    4.020408] x20: ffff0000042f3800 x19: ffff000003e70180 x18: ffff000005621300
[    4.020422] x17: 0000000000000000 x16: 0000000000000001
[    4.022014] sdhci_msm 7864900.mmc: Got CD GPIO
[    4.024692] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync cx_ao: -1431655766
[    4.031251]  x15: 0000000000000003
[    4.031257] x14: ffff8000827eecb0 x13: 0000000000000003 x12: 0000000000000003
[    4.035445] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync cx_vfc: -1431655766
[    4.040365] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
[    4.040379] x8 : 0000000000000001
[    4.044380] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync mx: -1431655766
[    4.047575]  x7 : 0720072007200720 x6 : 0720072007200720
[    4.047586] x5 : ffff000003201f00
[    4.054716] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync mx_ao: -1431655766
[    4.061808]  x4 : 0000000000000000 x3 : 0000000000000000
[    4.061818] x2 : 0000000000000000 x1 : ffff8000801d1cf4
[    4.066867] ALSA device list:
[    4.076560]  x0 : ffff000003e70180
[    4.076569] Call trace:
[    4.076572]  regulator_put+0x78/0x88
[    4.079795]   No soundcards found.
[    4.086982]  regulator_register+0x6e0/0x8a0
[    4.086994]  devm_regulator_register+0x64/0xb8
[    4.195287]  rpm_reg_probe+0x15c/0x238
[    4.195304]  platform_probe+0x94/0xd8
[    4.195316]  really_probe+0x13c/0x3f0
[    4.195325]  __driver_probe_device+0xa8/0x118
[    4.195334]  driver_probe_device+0x48/0x238
[    4.195344]  __device_attach_driver+0x138/0x1e0
[    4.195353]  bus_for_each_drv+0x104/0x168
[    4.195365]  __device_attach_async_helper+0x88/0x110
[    4.195374]  async_run_entry_fn+0x40/0x168
[    4.195387]  process_scheduled_works+0x180/0x3d8
[    4.195399]  worker_thread+0x290/0x3a0
[    4.195409]  kthread+0x104/0x198
[    4.195418]  ret_from_fork+0x10/0x20
[    4.248368] ---[ end trace 000000000000�[    4.256647] s4: failed to enable: (____ptrval____)
[    4.256783] ------------[ cut here ]------------
[    4.260342] WARNING: CPU: 1 PID: 102 at drivers/regulator/core.c:2395 regulator_put+0x78/0x88
[    4.265133] Modules linked in:
[    4.273533] CPU: 1 UID: 0 PID: 102 Comm: kworker/u16:4 Tainted: G        W          6.12.33-rc1 #1
[    4.276500] Tainted: [W]=WARN
[    4.285420] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
[    4.288471] Workqueue: async async_run_entry_fn
[    4.295236] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    4.299493] pc : regulator_put+0x78/0x88
[    4.306430] lr : regulator_put+0x2c/0x88
[    4.310595] sp : ffff800083ddba50
[    4.314501] x29: ffff800083ddba50 x28: 0000000000000000 x27: ffff800081b2f228
[    4.317724] x26: ffff800081b2f1c8 x25: 0000000000000001 x24: 00000000aaaaaaaa
[    4.324842] x23: ffff000004645080 x22: ffff0000045d8800 x21: ffff0000045d8800
[    4.331961] x20: ffff0000042f3800 x19: ffff000003e70240 x18: ffff8000816e1ca0
[    4.339078] x17: 0000000000000000 x16: 0000000000000001 x15: 0000000000000003
[    4.346197] x14: ffff8000827eecb0 x13: 0000000000000003 x12: 0000000000000003
[    4.353314] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
[    4.360431] x8 : 0000000000000001 x7 : 0720072007200720 x6 : 0720072007200720
[    4.367550] x5 : ffff000003201f00 x4 : 0000000000000000 x3 : 0000000000000000
[    4.374667] x2 : 0000000000000000 x1 : ffff8000801d1cf4 x0 : ffff000003e70240
[    4.381787] Call trace:
[    4.388890]  regulator_put+0x78/0x88
[    4.391152]  regulator_register+0x6e0/0x8a0
[    4.394971]  devm_regulator_register+0x64/0xb8
[    4.398880]  rpm_reg_probe+0x15c/0x238
[    4.403390]  platform_probe+0x94/0xd8
[    4.407124]  really_probe+0x13c/0x3f0
[    4.410855]  __driver_probe_device+0xa8/0x118
[    4.414504]  driver_probe_device+0x48/0x238
[    4.418844]  __device_attach_driver+0x138/0x1e0
[    4.422837]  bus_for_each_drv+0x104/0x168
[    4.427349]  __device_attach_async_helper+0x88/0x110
[    4.431519]  async_run_entry_fn+0x40/0x168
[    4.436552]  process_scheduled_works+0x180/0x3d8
[    4.440460]  worker_thread+0x290/0x3a0
[    4.445231]  kthread+0x104/0x198
[    4.448788]  ret_from_fork+0x10/0x20
[    4.452176] ---[ end trace 0000000000000000 ]---

------------[ cut here ]------------
[    3.973603] WARNING: CPU: 0 PID: 45 at drivers/regulator/core.c:2395 regulator_put+0x78/0x88
[    3.978387] Modules linked in:
[    3.986792] CPU: 0 UID: 0 PID: 45 Comm: kworker/u16:2 Not tainted 6.12.33-rc1 #1
[    3.987163] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    3.988495] sdhci_msm 7864900.mmc: Got CD GPIO
[    3.989650] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
[    3.989659] Workqueue: async async_run_entry_fn
[    3.989679] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    3.989690] pc : regulator_put+0x78/0x88
[    3.999650] clk: Disabling unused clocks
[    4.003882] lr : regulator_put+0x2c/0x88
[    4.003895] sp : ffff80008330ba50
[    4.003899] x29: ffff80008330ba50 x28: 0000000000000000 x27: ffff800081b2f208
[    4.003914] x26: ffff800081b2f1c8 x25: 0000000000000001 x24: 00000000aaaaaaaa
[    4.008837] PM: genpd: Disabling unused power domains
[    4.014992] x23: ffff00000498b080 x22: ffff0000049e1800 x21: ffff0000049e1800
[    4.015007] x20: ffff00000464c4c0 x19: ffff0000052a0180 x18: ffff000004518000
[    4.019404] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync cx: -1431655766
[    4.026189] x17: 0000000000000000 x16: 0000000000000001 x15: 0000000000000003
[    4.026203] x14: ffff8000827eecb0 x13: 0000000000000003 x12: 0000000000000003
[    4.030525] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync cx_ao: -1431655766
[    4.034261] 
[    4.034265] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
[    4.034278] x8 : 0000000000000001 x7 : 0720072007200720
[    4.038193] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync cx_vfc: -1431655766
[    4.041387]  x6 : 0720072007200720
[    4.041393] x5 : ffff000003201f00 x4 : 0000000000000000 x3 : 0000000000000000
[    4.048541] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync mx: -1431655766
[    4.055618] 
[    4.055622] x2 : 0000000000000000 x1 : ffff8000801d1cf4 x0 : ffff0000052a0180
[    4.055637] Call trace:
[    4.060681] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync mx_ao: -1431655766
[    4.067774]  regulator_put+0x78/0x88
[    4.067786]  regulator_register+0x6e0/0x8a0
[    4.074920] ALSA device list:
[    4.084441]  devm_regulator_register+0x64/0xb8
[    4.084452]  rpm_reg_probe+0x15c/0x238
[    4.091490]   No soundcards found.
[    4.098595]  platform_probe+0x94/0xd8
[    4.098607]  really_probe+0x13c/0x3f0
[    4.198729]  __driver_probe_device+0xa8/0x118
[    4.198739]  driver_probe_device+0x48/0x238
[    4.198749]  __device_attach_driver+0x138/0x1e0
[    4.198758]  bus_for_each_drv+0x104/0x168
[    4.198772]  __device_attach_async_helper+0x88/0x110
[    4.198782]  async_run_entry_fn+0x40/0x168
[    4.198796]  process_scheduled_works+0x180/0x3d8
[    4.198808]  worker_thread+0x290/0x3a0
[    4.198818]  kthread+0x104/0x198
[    4.198827]  ret_from_fork+0x10/0x20
[    4.198838] ---[ end trace 0000000000000000 ]---

------------[ cut here ]------------
[    3.965953] WARNING: CPU: 3 PID: 14 at drivers/regulator/core.c:2395 regulator_put+0x78/0x88
[    3.970736] Modules linked in:
[    3.972167] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    3.978919] sdhci_msm 7864900.mmc: Got CD GPIO
[    3.979130] CPU: 3 UID: 0 PID: 14 Comm: kworker/u16:1 Not tainted 6.12.33-rc1 #1
[    3.979143] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
[    3.979149] Workqueue: async async_run_entry_fn
[    3.979170] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    3.979179] pc : regulator_put+0x78/0x88
[    3.979191] lr : regulator_put+0x2c/0x88
[    3.984783] clk: Disabling unused clocks
[    3.988852] sp : ffff800082f0ba50
[    3.988857] x29: ffff800082f0ba50 x28: 0000000000000000 x27: ffff800081b2f208
[    3.988873] x26: ffff800081b2f1c8 x25: 0000000000000001 x24: 00000000aaaaaaaa
[    3.988887] x23: ffff000005a10480 x22: ffff0000055f0000 x21: ffff0000055f0000
[    3.993850] PM: genpd: Disabling unused power domains
[    4.000662] x20: ffff00000455c180 x19: ffff0000055c50c0 x18: ffff0000032f9300
[    4.000677] x17: 0000000000000000 x16: 0000000000000001 x15: 0000000000000003
[    4.000691] x14: ffff8000827eecb0 x13: 0000000000000003 x12: 0000000000000003
[    4.007563] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync cx: -1431655766
[    4.011599] 
[    4.011602] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
[    4.011616] x8 : 0000000000000001 x7 : 0720072007200720 x6 : 0720072007200720
[    4.013474] sdhci_msm 7864900.mmc: Got CD GPIO
[    4.018714] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync cx_ao: -1431655766
[    4.022705] 
[    4.022708] x5 : ffff000003201f00 x4 : 0000000000000000 x3 : 0000000000000000
[    4.022722] x2 : 0000000000000000 x1 : ffff8000801d1cf4
[    4.026690] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync cx_vfc: -1431655766
[    4.030516]  x0 : ffff0000055c50c0
[    4.030524] Call trace:
[    4.030529]  regulator_put+0x78/0x88
[    4.030541]  regulator_register+0x6e0/0x8a0
[    4.033812] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync mx: -1431655766
[    4.040857]  devm_regulator_register+0x64/0xb8
[    4.040870]  rpm_reg_probe+0x15c/0x238
[    4.040884]  platform_probe+0x94/0xd8
[    4.048030] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync mx_ao: -1431655766
[    4.055085]  really_probe+0x13c/0x3f0
[    4.055094]  __driver_probe_device+0xa8/0x118
[    4.055103]  driver_probe_device+0x48/0x238
[    4.055112]  __device_attach_driver+0x138/0x1e0
[    4.060180] ALSA device list:
[    4.067241]  bus_for_each_drv+0x104/0x168
[    4.067255]  __device_attach_async_helper+0x88/0x110
[    4.067264]  async_run_entry_fn+0x40/0x168
[    4.074377]   No soundcards found.
[    4.081482]  process_scheduled_works+0x180/0x3d8
[    4.081495]  worker_thread+0x290/0x3a0
[    4.229864]  kthread+0x104/0x198
[    4.229876]  ret_from_fork+0x10/0x20
[    4.229888] ---[ end trace 0000000000000000 ]---

------------[ cut here ]------------
[    3.979187] WARNING: CPU: 1 PID: 12 at drivers/regulator/core.c:2395 regulator_put+0x78/0x88
[    3.983972] Modules linked in:
[    3.985447] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    3.992154] sdhci_msm 7864900.mmc: Got CD GPIO
[    3.992367] CPU: 1 UID: 0 PID: 12 Comm: kworker/u16:0 Not tainted 6.12.33-rc1 #1
[    3.992379] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
[    3.992386] Workqueue: async async_run_entry_fn
[    3.997965] clk: Disabling unused clocks
[    4.002089] 
[    4.002095] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    4.002106] pc : regulator_put+0x78/0x88
[    4.002118] lr : regulator_put+0x2c/0x88
[    4.002127] sp : ffff800080083a50
[    4.007043] PM: genpd: Disabling unused power domains
[    4.013897] x29: ffff800080083a50 x28: 0000000000000000 x27: ffff800081b2f208
[    4.013913] x26: ffff800081b2f1c8 x25: 0000000000000001 x24: 00000000aaaaaaaa
[    4.020838] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync cx: -1431655766
[    4.024830] 
[    4.024834] x23: ffff0000045ad680 x22: ffff00000463f000 x21: ffff00000463f000
[    4.024848] x20: ffff000003875400 x19: ffff00000529b600 x18: ffff8000816e1ca0
[    4.024862] x17: 0006ecacc09d7c6c x16: 000000000000001c
[    4.026519] sdhci_msm 7864900.mmc: Got CD GPIO
[    4.029085] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync cx_ao: -1431655766
[    4.030476]  x15: 0000000000000104
[    4.030484] x14: 000000000000001c x13: ffff800080080000 x12: ffff800080084000
[    4.030498] x11: 0000000000000000
[    4.037186] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync cx_vfc: -1431655766
[    4.041323]  x10: 0000000000000000 x9 : 0000000000000000
[    4.041334] x8 : 0000000000000001 x7 : 0720072007200720 x6 : 0720072007200720
[    4.041348] x5 : ffff000003201f00
[    4.045253] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync mx: -1431655766
[    4.048445]  x4 : 0000000000000000 x3 : ffff800080083670
[    4.048456] x2 : ffff0000032f5f00 x1 : ffff8000801d1cf4 x0 : ffff00000529b600
[    4.048471] Call trace:
[    4.048475]  regulator_put+0x78/0x88
[    4.053535] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync mx_ao: -1431655766
[    4.060598]  regulator_register+0x6e0/0x8a0
[    4.060611]  devm_regulator_register+0x64/0xb8
[    4.060622]  rpm_reg_probe+0x15c/0x238
[    4.067745] ALSA device list:
[    4.077256]  platform_probe+0x94/0xd8
[    4.077268]  really_probe+0x13c/0x3f0
[    4.078746]   No soundcards found.
[    4.085772]  __driver_probe_device+0xa8/0x118
[    4.085781]  driver_probe_device+0x48/0x238
[    4.085790]  __device_attach_driver+0x138/0x1e0
[    4.223664]  bus_for_each_drv+0x104/0x168
[    4.223681]  __device_attach_async_helper+0x88/0x110
[    4.223690]  async_run_entry_fn+0x40/0x168
[    4.223704]  process_scheduled_works+0x180/0x3d8
[    4.223717]  worker_thread+0x290/0x3a0
[    4.223728]  kthread+0x104/0x198
[    4.223737]  ret_from_fork+0x10/0x20
[    4.223748] ---[ end trace 0000000000000000 ]---

------------[ cut here ]------------
[    4.246273] WARNING: CPU: 1 PID: 60 at drivers/regulator/core.c:2395 regulator_put+0x78/0x88
[    4.249935] Modules linked in:
[    4.258341] CPU: 1 UID: 0 PID: 60 Comm: kworker/u16:3 Tainted: G        W          6.12.33-rc1 #1
[    4.261220] Tainted: [W]=WARN
[    4.270141] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
[    4.273105] Workqueue: async async_run_entry_fn
[    4.279870] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    4.284128] pc : regulator_put+0x78/0x88
[    4.291064] lr : regulator_put+0x2c/0x88
[    4.295231] sp : ffff8000833b3a50
[    4.299135] x29: ffff8000833b3a50 x28: 0000000000000000 x27: ffff800081b2f228
[    4.302357] x26: ffff800081b2f1c8 x25: 0000000000000001 x24: 00000000aaaaaaaa
[    4.309476] x23: ffff0000055cc280 x22: ffff000005712800 x21: ffff000005712800
[    4.316593] x20: ffff00000397c400 x19: ffff000004064240 x18: 0000000000000000
[    4.323711] x17: 0000000000000000 x16: 0000000000000001 x15: 0000000000000003
[    4.330829] x14: ffff8000827eecb0 x13: 0000000000000003 x12: 0000000000000003
[    4.337947] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
[    4.345066] x8 : 0000000000000001 x7 : 0720072007200720 x6 : 0720072007200720
[    4.352183] x5 : ffff000003201f00 x4 : 0000000000000000 x3 : 0000000000000000
[    4.359301] x2 : 0000000000000000 x1 : ffff8000801d1cf4 x0 : ffff000004064240
[    4.366421] Call trace:
[    4.373526]  regulator_put+0x78/0x88
[    4.375786]  regulator_register+0x6e0/0x8a0
[    4.379606]  devm_regulator_register+0x64/0xb8
[    4.383512]  rpm_reg_probe+0x15c/0x238
[    4.388024]  platform_probe+0x94/0xd8
[    4.391757]  really_probe+0x13c/0x3f0
[    4.395490]  __driver_probe_device+0xa8/0x118
[    4.399138]  driver_probe_device+0x48/0x238
[    4.403478]  __device_attach_driver+0x138/0x1e0
[    4.407472]  bus_for_each_drv+0x104/0x168
[    4.411983]  __device_attach_async_helper+0x88/0x110
[    4.416154]  async_run_entry_fn+0x40/0x168
[    4.421187]  process_scheduled_works+0x180/0x3d8
[    4.425095]  worker_thread+0x290/0x3a0
[    4.429865]  kthread+0x104/0x198
[    4.433423]  ret_from_fork+0x10/0x20
[    4.436810] ---[ end trace 0000000000000000 ]---

------------[ cut here ]------------
[    3.981100] WARNING: CPU: 2 PID: 103 at drivers/regulator/core.c:2395 regulator_put+0x78/0x88
[    3.985882] Modules linked in:
[    3.988281] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    3.994279] CPU: 2 UID: 0 PID: 103 Comm: kworker/u16:4 Not tainted 6.12.33-rc1 #1
[    3.994291] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
[    3.994298] Workqueue: async async_run_entry_fn
[    3.994321] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    3.994331] pc : regulator_put+0x78/0x88
[    3.994345] lr : regulator_put+0x2c/0x88
[    3.994354] sp : ffff800083dc3a50
[    3.994358] x29: ffff800083dc3a50
[    3.995096] sdhci_msm 7864900.mmc: Got CD GPIO
[    3.999707] clk: Disabling unused clocks
[    4.004092]  x28: 0000000000000000 x27: ffff800081b2f208
[    4.004105] x26: ffff800081b2f1c8 x25: 0000000000000001 x24: 00000000aaaaaaaa
[    4.004119] x23: ffff000004361480 x22: ffff0000045cc000 x21: ffff0000045cc000
[    4.012163] PM: genpd: Disabling unused power domains
[    4.018234] 
[    4.018238] x20: ffff00000389dbc0 x19: ffff0000040d00c0 x18: 0000000000000000
[    4.018253] x17: 0000000000000000 x16: 0000000000000001
[    4.022771] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync cx: -1431655766
[    4.028707] sdhci_msm 7864900.mmc: Got CD GPIO
[    4.029432]  x15: 0000000000000003
[    4.029440] x14: ffff8000827eecb0 x13: 0000000000000003 x12: 0000000000000003
[    4.029454] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
[    4.029468] x8 : 0000000000000001
[    4.033708] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync cx_ao: -1431655766
[    4.037504]  x7 : 0720072007200720 x6 : 0720072007200720
[    4.037515] x5 : ffff000003201f00 x4 : 0000000000000000 x3 : 0000000000000000
[    4.037529] x2 : 0000000000000000 x1 : ffff8000801d1cf4 x0 : ffff0000040d00c0
[    4.040745] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync cx_vfc: -1431655766
[    4.044016] 
[    4.044021] Call trace:
[    4.044025]  regulator_put+0x78/0x88
[    4.048382] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync mx: -1431655766
[    4.052439]  regulator_register+0x6e0/0x8a0
[    4.052452]  devm_regulator_register+0x64/0xb8
[    4.052465]  rpm_reg_probe+0x15c/0x238
[    4.057760] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync mx_ao: -1431655766
[    4.064768]  platform_probe+0x94/0xd8
[    4.064780]  really_probe+0x13c/0x3f0
[    4.064790]  __driver_probe_device+0xa8/0x118
[    4.071900] ALSA device list:
[    4.076911]  driver_probe_device+0x48/0x238
[    4.076920]  __device_attach_driver+0x138/0x1e0
[    4.078521]   No soundcards found.
[    4.085511]  bus_for_each_drv+0x104/0x168
[    4.085525]  __device_attach_async_helper+0x88/0x110
[    4.234430]  async_run_entry_fn+0x40/0x168
[    4.234448]  process_scheduled_works+0x180/0x3d8
[    4.234461]  worker_thread+0x290/0x3a0
[    4.234472]  kthread+0x104/0x198
[    4.234481]  ret_from_fork+0x10/0x20
[    4.234494] ---[ end trace 0000000000000000 ]---

------------[ cut here ]------------
[    3.976494] WARNING: CPU: 0 PID: 14 at drivers/regulator/core.c:2395 regulator_put+0x78/0x88
[    3.979911] sdhci_msm 7864900.mmc: Got CD GPIO
[    3.981259] Modules linked in:
[    3.981273] CPU: 0 UID: 0 PID: 14 Comm: kworker/u16:1 Not tainted 6.12.33-rc1 #1
[    3.981284] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
[    4.004558] Workqueue: async async_run_entry_fn
[    4.011214] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    4.015471] pc : regulator_put+0x78/0x88
[    4.022407] lr : regulator_put+0x2c/0x88
[    4.026573] sp : ffff800082f0ba50
[    4.030477] x29: ffff800082f0ba50 x28: 0000000000000000 x27: ffff800081b2f208
[    4.033701] x26: ffff800081b2f1c8 x25: 0000000000000001 x24: 00000000aaaaaaaa
[    4.040817] x23: ffff000005972c80 x22: ffff000005660800 x21: ffff000005660800
[    4.047937] x20: ffff0000056a93c0 x19: ffff0000056bf0c0 x18: 0000000000000002
[    4.055053] x17: 0000000000000000 x16: 0000000000000001 x15: 0000000000000344
[    4.062172] x14: 0000000000200000 x13: ffff800082f08000 x12: ffff800082f0c000
[    4.069297] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
[    4.076407] x8 : 0000000000000001 x7 : 0720072007200720 x6 : 0720072007200720
[    4.083527] x5 : ffff000003201f00 x4 : 0000000000000000 x3 : ffff800082f0b630
[    4.090644] x2 : ffff0000032f9300 x1 : ffff8000801d1cf4 x0 : ffff0000056bf0c0
[    4.097764] Call trace:
[    4.104868]  regulator_put+0x78/0x88
[    4.107127]  regulator_register+0x6e0/0x8a0
[    4.110949]  devm_regulator_register+0x64/0xb8
[    4.114856]  rpm_reg_probe+0x15c/0x238
[    4.119368]  platform_probe+0x94/0xd8
[    4.123099]  really_probe+0x13c/0x3f0
[    4.126832]  __driver_probe_device+0xa8/0x118
[    4.130481]  driver_probe_device+0x48/0x238
[    4.134819]  __device_attach_driver+0x138/0x1e0
[    4.138813]  bus_for_each_drv+0x104/0x168
[    4.143326]  __device_attach_async_helper+0x88/0x110
[    4.147495]  async_run_entry_fn+0x40/0x168
[    4.152529]  process_scheduled_works+0x180/0x3d8
[    4.156435]  worker_thread+0x290/0x3a0
[    4.161208]  kthread+0x104/0x198
[    4.164766]  ret_from_fork+0x10/0x20
[    4.168152] ---[ end trace 0000000000000000 ]---

------------[ cut here ]------------
[    4.265635] WARNING: CPU: 3 PID: 104 at drivers/regulator/core.c:2395 regulator_put+0x78/0x88
[    4.269296] Modules linked in:
[    4.277703] CPU: 3 UID: 0 PID: 104 Comm: kworker/u16:4 Tainted: G        W          6.12.33-rc1 #1
[    4.280670] Tainted: [W]=WARN
[    4.289590] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
[    4.292641] Workqueue: async async_run_entry_fn
[    4.299405] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    4.303663] pc : regulator_put+0x78/0x88
[    4.310602] lr : regulator_put+0x2c/0x88
[    4.314767] sp : ffff800083deba50
[    4.318671] x29: ffff800083deba50 x28: 0000000000000000 x27: ffff800081b2f228
[    4.321894] x26: ffff800081b2f1c8 x25: 0000000000000001 x24: 00000000aaaaaaaa
[    4.329015] x23: ffff000004686a80 x22: ffff000009688000 x21: ffff000009688000
[    4.336129] x20: ffff0000046c55c0 x19: ffff0000044243c0 x18: ffff000009664c00
[    4.343248] x17: 0000000000000000 x16: 0000000000000001 x15: 0000000000000003
[    4.350366] x14: ffff8000827eecb0 x13: 0000000000000003 x12: 0000000000000003
[    4.357485] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
[    4.364601] x8 : 0000000000000001 x7 : 0720072007200720 x6 : 0720072007200720
[    4.371719] x5 : ffff000003201f00 x4 : 0000000000000000 x3 : 0000000000000000
[    4.378839] x2 : 0000000000000000 x1 : ffff8000801d1cf4 x0 : ffff0000044243c0
[    4.385957] Call trace:
[    4.393063]  regulator_put+0x78/0x88
[    4.395321]  regulator_register+0x6e0/0x8a0
[    4.399142]  devm_regulator_register+0x64/0xb8
[    4.403050]  rpm_reg_probe+0x15c/0x238
[    4.407561]  platform_probe+0x94/0xd8
[    4.411295]  really_probe+0x13c/0x3f0
[    4.415027]  __driver_probe_device+0xa8/0x118
[    4.418673]  driver_probe_device+0x48/0x238
[    4.423013]  __device_attach_driver+0x138/0x1e0
[    4.427008]  bus_for_each_drv+0x104/0x168
[    4.431521]  __device_attach_async_helper+0x88/0x110
[    4.435691]  async_run_entry_fn+0x40/0x168
[    4.440723]  process_scheduled_works+0x180/0x3d8
[    4.444630]  worker_thread+0x290/0x3a0
[    4.449401]  kthread+0x104/0x198
[    4.452963]  ret_from_fork+0x10/0x20
[    4.456346] ---[ end trace 0000000000000000 ]---
------------[ cut here ]------------
[    3.976007] WARNING: CPU: 3 PID: 104 at drivers/regulator/core.c:2395 regulator_put+0x78/0x88
[    3.980793] Modules linked in:
[    3.981065] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    3.987971] sdhci_msm 7864900.mmc: Got CD GPIO
[    3.989187] CPU: 3 UID: 0 PID: 104 Comm: kworker/u16:4 Not tainted 6.12.33-rc1 #1
[    3.989200] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
[    3.989207] Workqueue: async async_run_entry_fn
[    3.994530] clk: Disabling unused clocks
[    3.998995] 
[    3.999002] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    3.999012] pc : regulator_put+0x78/0x88
[    4.003948] PM: genpd: Disabling unused power domains
[    4.010805] lr : regulator_put+0x2c/0x88
[    4.010817] sp : ffff800083deba50
[    4.010822] x29: ffff800083deba50 x28: 0000000000000000 x27: ffff800081b2f208
[    4.010837] x26: ffff800081b2f1c8 x25: 0000000000000001 x24: 00000000aaaaaaaa
[    4.017818] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync cx: -1431655766
[    4.021823] 
[    4.021827] x23: ffff000004686680 x22: ffff000009688000 x21: ffff000009688000
[    4.021841] x20: ffff0000046c55c0 x19: ffff000004424300
[    4.023558] sdhci_msm 7864900.mmc: Got CD GPIO
[    4.026019] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync cx_ao: -1431655766
[    4.027471]  x18: ffff000009664c00
[    4.034176] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync cx_vfc: -1431655766
[    4.038318] x17: 0000000000000000 x16: 0000000000000001 x15: 0000000000000003
[    4.038333] x14: ffff8000827eecb0
[    4.043289] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync mx: -1431655766
[    4.047257]  x13: 0000000000000003 x12: 0000000000000003
[    4.047267] x11: 0000000000000000 x10: 0000000000000000
[    4.050497] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync mx_ao: -1431655766
[    4.057593]  x9 : 0000000000000000
[    4.057600] x8 : 0000000000000001 x7 : 0720072007200720 x6 : 0720072007200720
[    4.064740] ALSA device list:
[    4.074249] 
[    4.074253] x5 : ffff000003201f00 x4 : 0000000000000000 x3 : 0000000000000000
[    4.075741]   No soundcards found.
[    4.082763] 
[    4.082767] x2 : 0000000000000000 x1 : ffff8000801d1cf4 x0 : ffff000004424300
[    4.182656] Call trace:
[    4.182661]  regulator_put+0x78/0x88
[    4.182676]  regulator_register+0x6e0/0x8a0
[    4.182689]  devm_regulator_register+0x64/0xb8
[    4.182701]  rpm_reg_probe+0x15c/0x238
[    4.182714]  platform_probe+0x94/0xd8
[    4.182726]  really_probe+0x13c/0x3f0
[    4.182735]  __driver_probe_device+0xa8/0x118
[    4.182744]  driver_probe_device+0x48/0x238
[    4.182753]  __device_attach_driver+0x138/0x1e0
[    4.182762]  bus_for_each_drv+0x104/0x168
[    4.182775]  __device_attach_async_helper+0x88/0x110
[    4.182784]  async_run_entry_fn+0x40/0x168
[    4.237122]  process_scheduled_works+0x180/0x3d8
[    4.241027]  worker_thread+0x290/0x3a0
[    4.245791]  kthread+0x104/0x198
[    4.249349]  ret_from_fork+0x10/0x20
[    4.252737] ---[ end trace 0000000000000000 ]---

------------[ cut here ]------------
[    3.984289] WARNING: CPU: 1 PID: 104 at drivers/regulator/core.c:2395 regulator_put+0x78/0x88
[    3.988427] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    3.989054] Modules linked in:
[    3.989067] CPU: 1 UID: 0 PID: 104 Comm: kworker/u16:4 Not tainted 6.12.33-rc1 #1
[    3.989079] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
[    3.989086] Workqueue: async async_run_entry_fn
[    3.989105] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    3.995268] sdhci_msm 7864900.mmc: Got CD GPIO
[    3.999988] clk: Disabling unused clocks
[    4.004236] pc : regulator_put+0x78/0x88
[    4.004250] lr : regulator_put+0x2c/0x88
[    4.004260] sp : ffff800083dd3a50
[    4.004264] x29: ffff800083dd3a50 x28: 0000000000000000 x27: ffff800081b2f208
[    4.007800] PM: genpd: Disabling unused power domains
[    4.014658] 
[    4.014661] x26: ffff800081b2f1c8 x25: 0000000000000001 x24: 00000000aaaaaaaa
[    4.014676] x23: ffff00000456d080 x22: ffff0000046cd000
[    4.021568] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync cx: -1431655766
[    4.025684]  x21: ffff0000046cd000
[    4.025691] x20: ffff00000432bfc0 x19: ffff000003f08600 x18: 0000000000186316
[    4.025705] x17: 0000000000000000
[    4.028701] sdhci_msm 7864900.mmc: Got CD GPIO
[    4.032749] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync cx_ao: -1431655766
[    4.037138]  x16: 0000000000000001 x15: 0000000000000003
[    4.037148] x14: ffff8000827eecb0 x13: 0000000000000003 x12: 0000000000000003
[    4.041244] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync cx_vfc: -1431655766
[    4.045122] 
[    4.045125] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
[    4.045139] x8 : 0000000000000001
[    4.049052] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync mx: -1431655766
[    4.052246]  x7 : 0720072007200720 x6 : 0720072007200720
[    4.059400] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync mx_ao: -1431655766
[    4.064390] 
[    4.064393] x5 : ffff000003201f00 x4 : 0000000000000000 x3 : 0000000000000000
[    4.065986] ALSA device list:
[    4.072990] x2 : 0000000000000000 x1 : ffff8000801d1cf4 x0 : ffff000003f08600
[    4.073006] Call trace:
[    4.078046]   No soundcards found.
[    4.087745]  regulator_put+0x78/0x88
[    4.087757]  regulator_register+0x6e0/0x8a0
[    4.202564]  devm_regulator_register+0x64/0xb8
[    4.202577]  rpm_reg_probe+0x15c/0x238
[    4.202591]  platform_probe+0x94/0xd8
[    4.202603]  really_probe+0x13c/0x3f0
[    4.202612]  __driver_probe_device+0xa8/0x118
[    4.202621]  driver_probe_device+0x48/0x238
[    4.202630]  __device_attach_driver+0x138/0x1e0
[    4.202639]  bus_for_each_drv+0x104/0x168
[    4.202652]  __device_attach_async_helper+0x88/0x110
[    4.202662]  async_run_entry_fn+0x40/0x168
[    4.202675]  process_scheduled_works+0x180/0x3d8
[    4.202686]  worker_thread+0x290/0x3a0
[    4.252610]  kthread+0x104/0x198
[    4.256158]  ret_from_fork+0x10/0x20
[    4.259543] ---[ end trace 0000000000000�+HH��4.267793] s4: failed to enable: (____ptrval____)
[    4.267953] ------------[ cut here ]------------
[    4.271515] WARNING: CPU: 1 PID: 104 at drivers/regulator/core.c:2395 regulator_put+0x78/0x88
[    4.276298] Modules linked in:
[    4.284708] CPU: 1 UID: 0 PID: 104 Comm: kworker/u16:4 Tainted: G        W          6.12.33-rc1 #1
[    4.287673] Tainted: [W]=WARN
[    4.296594] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
[    4.299644] Workqueue: async async_run_entry_fn
[    4.306409] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    4.310666] pc : regulator_put+0x78/0x88
[    4.317603] lr : regulator_put+0x2c/0x88
[    4.321768] sp : ffff800083dd3a50
[    4.325673] x29: ffff800083dd3a50 x28: 0000000000000000 x27: ffff800081b2f228
[    4.328900] x26: ffff800081b2f1c8 x25: 0000000000000001 x24: 00000000aaaaaaaa
[    4.336014] x23: ffff00000456d480 x22: ffff0000046cd000 x21: ffff0000046cd000
[    4.343132] x20: ffff00000432bfc0 x19: ffff000003f086c0 x18: ffff8000816e1ca0
[    4.350249] x17: 0000000000000000 x16: 0000000000000001 x15: 0000000000000003
[    4.357368] x14: ffff8000827eecb0 x13: 0000000000000003 x12: 0000000000000003
[    4.364485] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
[    4.371604] x8 : 0000000000000001 x7 : 0720072007200720 x6 : 0720072007200720
[    4.378722] x5 : ffff000003201f00 x4 : 0000000000000000 x3 : 0000000000000000
[    4.385840] x2 : 0000000000000000 x1 : ffff8000801d1cf4 x0 : ffff000003f086c0
[    4.392961] Call trace:
[    4.400064]  regulator_put+0x78/0x88
[    4.402324]  regulator_register+0x6e0/0x8a0
[    4.406145]  devm_regulator_register+0x64/0xb8
[    4.410053]  rpm_reg_probe+0x15c/0x238
[    4.414564]  platform_probe+0x94/0xd8
[    4.418297]  really_probe+0x13c/0x3f0
[    4.422028]  __driver_probe_device+0xa8/0x118
[    4.425676]  driver_probe_device+0x48/0x238
[    4.430015]  __device_attach_driver+0x138/0x1e0
[    4.434010]  bus_for_each_drv+0x104/0x168
[    4.438523]  __device_attach_async_helper+0x88/0x110
[    4.442692]  async_run_entry_fn+0x40/0x168
[    4.447724]  process_scheduled_works+0x180/0x3d8
[    4.451632]  worker_thread+0x290/0x3a0
[    4.456404]  kthread+0x104/0x198
[    4.459961]  ret_from_fork+0x10/0x20
[    4.463349] ---[ end trace 0000000000000000 ]---

------------[ cut here ]------------
[    3.977239] WARNING: CPU: 0 PID: 14 at drivers/regulator/core.c:2395 regulator_put+0x78/0x88
[    3.982020] Modules linked in:
[    3.990426] CPU: 0 UID: 0 PID: 14 Comm: kworker/u16:1 Not tainted 6.12.33-rc1 #1
[    3.993303] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
[    3.993832] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    4.000838] Workqueue: async async_run_entry_fn
[    4.000860] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    4.000871] pc : regulator_put+0x78/0x88
[    4.000879] sdhci_msm 7864900.mmc: Got CD GPIO
[    4.010470] clk: Disabling unused clocks
[    4.014201] lr : regulator_put+0x2c/0x88
[    4.014213] sp : ffff800082f0ba50
[    4.014217] x29: ffff800082f0ba50 x28: 0000000000000000 x27: ffff800081b2f208
[    4.014233] x26: ffff800081b2f1c8 x25: 0000000000000001 x24: 00000000aaaaaaaa
[    4.014246] x23: ffff000005b0a480 x22: ffff000005b50800 x21: ffff000005b50800
[    4.019405] PM: genpd: Disabling unused power domains
[    4.025398] 
[    4.025401] x20: ffff000005aab0c0 x19: ffff000005ab5180 x18: 000000000013c106
[    4.025416] x17: 0000000000000000 x16: 0000000000000001 x15: 0000000000000003
[    4.025429] x14: ffff8000827eecb0 x13: 0000000000000003 x12: 0000000000000003
[    4.029737] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync cx: -1431655766
[    4.033817] 
[    4.033819] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
[    4.033833] x8 : 0000000000000001
[    4.038058] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync cx_ao: -1431655766
[    4.041802]  x7 : 0720072007200720 x6 : 0720072007200720
[    4.041813] x5 : ffff000003201f00 x4 : 0000000000000000
[    4.045046] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync cx_vfc: -1431655766
[    4.052138]  x3 : 0000000000000000
[    4.052145] x2 : 0000000000000000 x1 : ffff8000801d1cf4 x0 : ffff000005ab5180
[    4.052160] Call trace:
[    4.052164]  regulator_put+0x78/0x88
[    4.059314] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync mx: -1431655766
[    4.066372]  regulator_register+0x6e0/0x8a0
[    4.066385]  devm_regulator_register+0x64/0xb8
[    4.066395]  rpm_reg_probe+0x15c/0x238
[    4.066409]  platform_probe+0x94/0xd8
[    4.071425] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync mx_ao: -1431655766
[    4.072973]  really_probe+0x13c/0x3f0
[    4.080020] ALSA device list:
[    4.087122]  __driver_probe_device+0xa8/0x118
[    4.087131]  driver_probe_device+0x48/0x238
[    4.094258]   No soundcards found.
[    4.103780]  __device_attach_driver+0x138/0x1e0
[    4.103790]  bus_for_each_drv+0x104/0x168
[    4.220331]  __device_attach_async_helper+0x88/0x110
[    4.220343]  async_run_entry_fn+0x40/0x168
[    4.220356]  process_scheduled_works+0x180/0x3d8
[    4.220369]  worker_thread+0x290/0x3a0
[    4.220380]  kthread+0x104/0x198
[    4.220389]  ret_from_fork+0x10/0x20
[    4.220400] ---[ end trace 0000000000000000 ]---

------------[ cut here ]------------
[    4.183916] WARNING: CPU: 3 PID: 12 at drivers/regulator/core.c:2395 regulator_put+0x78/0x88
[    4.188703] Modules linked in:
[    4.189100] sdhci_msm 7864900.mmc: Got CD GPIO
[    4.197098] CPU: 3 UID: 0 PID: 12 Comm: kworker/u16:0 Tainted: G        W          6.12.33-rc1 #1
[    4.197112] Tainted: [W]=WARN
[    4.197116] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
[    4.197123] Workqueue: async async_run_entry_fn
[    4.223063] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    4.227321] pc : regulator_put+0x78/0x88
[    4.234258] lr : regulator_put+0x2c/0x88
[    4.238424] sp : ffff800080083a50
[    4.242329] x29: ffff800080083a50 x28: 0000000000000000 x27: ffff800081b2f228
[    4.245551] x26: ffff800081b2f1c8 x25: 0000000000000001 x24: 00000000aaaaaaaa
[    4.252485] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    4.252656] x23: ffff000005ad4080 x22: ffff0000057da800
[    4.259186] sdhci_msm 7864900.mmc: Got CD GPIO
[    4.262601] clk: Disabling unused clocks
[    4.266542]  x21: ffff0000057da800
[    4.266549] x20: ffff0000057f80c0 x19: ffff0000057bef00 x18: ffff0000032f5f00
[    4.266564] x17: 0000000000000000 x16: 0000000000000001 x15: 0000000000000003
[    4.266578] x14: ffff8000827eecb0 x13: 0000000000000003 x12: 0000000000000003
[    4.272184] PM: genpd: Disabling unused power domains
[    4.276001] 
[    4.276004] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
[    4.276018] x8 : 0000000000000001 x7 : 0720072007200720 x6 : 0720072007200720
[    4.280226] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync cx: -1431655766
[    4.283299] 
[    4.283301] x5 : ffff000003201f00 x4 : 0000000000000000 x3 : 0000000000000000
[    4.283315] x2 : 0000000000000000 x1 : ffff8000801d1cf4 x0 : ffff0000057bef00
[    4.283330] Call trace:
[    4.283334]  regulator_put+0x78/0x88
[    4.290686] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync cx_ao: -1431655766
[    4.297622]  regulator_register+0x6e0/0x8a0
[    4.297637]  devm_regulator_register+0x64/0xb8
[    4.304774] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync cx_vfc: -1431655766
[    4.309671] sdhci_msm 7864900.mmc: Got CD GPIO
[    4.309766]  rpm_reg_probe+0x15c/0x238
[    4.309782]  platform_probe+0x94/0xd8
[    4.311354] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync mx: -1431655766
[    4.318369]  really_probe+0x13c/0x3f0
[    4.318379]  __driver_probe_device+0xa8/0x118
[    4.318389]  driver_probe_device+0x48/0x238
[    4.325519] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync mx_ao: -1431655766
[    4.335027]  __device_attach_driver+0x138/0x1e0
[    4.335038]  bus_for_each_drv+0x104/0x168
[    4.336520] ALSA device list:
[    4.343541]  __device_attach_async_helper+0x88/0x110
[    4.343553]  async_run_entry_fn+0x40/0x168
[    4.343566] sdhci_msm 7864900.mmc: Got CD GPIO
[    4.343569]  process_scheduled_works+0x180/0x3d8
[    4.343582]  worker_thread+0x290/0x3a0
[    4.350671]   No soundcards found.
[    4.352910]  kthread+0x104/0x198
[    4.352919]  ret_from_fork+0x10/0x20
[    4.468060] ---[ end trace 0000000000000000 ]---
------------[ cut here ]------------
[    3.974629] WARNING: CPU: 0 PID: 12 at drivers/regulator/core.c:2395 regulator_put+0x78/0x88
[    3.979416] Modules linked in:
[    3.981268] sdhci_msm 7864900.mmc: Got CD GPIO
[    3.987809] CPU: 0 UID: 0 PID: 12 Comm: kworker/u16:0 Not tainted 6.12.33-rc1 #1
[    3.987821] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
[    3.987829] Workqueue: async async_run_entry_fn
[    4.009349] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    4.013609] pc : regulator_put+0x78/0x88
[    4.020544] lr : regulator_put+0x2c/0x88
[    4.024710] sp : ffff800080083a50
[    4.028613] x29: ffff800080083a50 x28: 0000000000000000 x27: ffff800081b2f208
[    4.031836] x26: ffff800081b2f1c8 x25: 0000000000000001 x24: 00000000aaaaaaaa
[    4.038954] x23: ffff000005b88280 x22: ffff0000045ca800 x21: ffff0000045ca800
[    4.046072] x20: ffff0000039a9b80 x19: ffff0000055de540 x18: ffff0000032f5f00
[    4.053191] x17: 0000000000000000 x16: 0000000000000001 x15: 0000000000000003
[    4.060308] x14: ffff8000827eecb0 x13: 0000000000000003 x12: 0000000000000003
[    4.067425] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
[    4.074543] x8 : 0000000000000001 x7 : 0720072007200720 x6 : 0720072007200720
[    4.081661] x5 : ffff000003201f00 x4 : 0000000000000000 x3 : 0000000000000000
[    4.088780] x2 : 0000000000000000 x1 : ffff8000801d1cf4 x0 : ffff0000055de540
[    4.095899] Call trace:
[    4.103005]  regulator_put+0x78/0x88
[    4.105266]  regulator_register+0x6e0/0x8a0
[    4.109091]  devm_regulator_register+0x64/0xb8
[    4.112991]  rpm_reg_probe+0x15c/0x238
[    4.117504]  platform_probe+0x94/0xd8
[    4.121238]  really_probe+0x13c/0x3f0
[    4.124970]  __driver_probe_device+0xa8/0x118
[    4.128615]  driver_probe_device+0x48/0x238
[    4.132957]  __device_attach_driver+0x138/0x1e0
[    4.136950]  bus_for_each_drv+0x104/0x168
[    4.141463]  __device_attach_async_helper+0x88/0x110
[    4.145632]  async_run_entry_fn+0x40/0x168
[    4.150664]  process_scheduled_works+0x180/0x3d8
[    4.154572]  worker_thread+0x290/0x3a0
[    4.159345]  kthread+0x104/0x198
[    4.162901]  ret_from_fork+0x10/0x20
[    4.166289] ---[ end trace 0000000000000000 ]---

------------[ cut here ]------------
[    3.975631] WARNING: CPU: 3 PID: 45 at drivers/regulator/core.c:2395 regulator_put+0x78/0x88
[    3.980417] Modules linked in:
[    3.988581] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    3.988812] CPU: 3 UID: 0 PID: 45 Comm: kworker/u16:2 Not tainted 6.12.33-rc1 #1
[    3.989948] sdhci_msm 7864900.mmc: Got CD GPIO
[    3.994648] clk: Disabling unused clocks
[    3.998539] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
[    3.998547] Workqueue: async async_run_entry_fn
[    3.998567] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    3.998578] pc : regulator_put+0x78/0x88
[    4.006627] PM: genpd: Disabling unused power domains
[    4.010165] lr : regulator_put+0x2c/0x88
[    4.010177] sp : ffff80008330ba50
[    4.010182] x29: ffff80008330ba50 x28: 0000000000000000 x27: ffff800081b2f208
[    4.014527] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync cx: -1431655766
[    4.020931] 
[    4.020934] x26: ffff800081b2f1c8 x25: 0000000000000001 x24: 00000000aaaaaaaa
[    4.020949] x23: ffff00000985aa80 x22: ffff000005bd8000 x21: ffff000005bd8000
[    4.020964] x20: ffff00000455c680 x19: ffff0000044b80c0 x18: ffff0000044e0000
[    4.020978] x17: 0000000000000000
[    4.025221] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync cx_ao: -1431655766
[    4.032125]  x16: 0000000000000001 x15: 0000000000000003
[    4.032136] x14: ffff8000827eecb0 x13: 0000000000000003 x12: 0000000000000003
[    4.032150] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
[    4.035535] sdhci_msm 7864900.mmc: Got CD GPIO
[    4.036368] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync cx_vfc: -1431655766
[    4.041239] 
[    4.041242] x8 : 0000000000000001 x7 : 0720072007200720 x6 : 0720072007200720
[    4.041256] x5 : ffff000003201f00 x4 : 0000000000000000 x3 : 0000000000000000
[    4.041270] x2 : 0000000000000000
[    4.045298] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync mx: -1431655766
[    4.048449]  x1 : ffff8000801d1cf4 x0 : ffff0000044b80c0
[    4.048461] Call trace:
[    4.048465]  regulator_put+0x78/0x88
[    4.055602] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync mx_ao: -1431655766
[    4.065109]  regulator_register+0x6e0/0x8a0
[    4.065121]  devm_regulator_register+0x64/0xb8
[    4.065132]  rpm_reg_probe+0x15c/0x238
[    4.065144]  platform_probe+0x94/0xd8
[    4.066633] ALSA device list:
[    4.073624]  really_probe+0x13c/0x3f0
[    4.073633]  __driver_probe_device+0xa8/0x118
[    4.080758]   No soundcards found.
[    4.087852]  driver_probe_device+0x48/0x238
[    4.087863]  __device_attach_driver+0x138/0x1e0
[    4.218630]  bus_for_each_drv+0x104/0x168
[    4.218647]  __device_attach_async_helper+0x88/0x110
[    4.218657]  async_run_entry_fn+0x40/0x168
[    4.218671]  process_scheduled_works+0x180/0x3d8
[    4.218684]  worker_thread+0x290/0x3a0
[    4.218694]  kthread+0x104/0x198
[    4.218703]  ret_from_fork+0x10/0x20
[    4.218714] ---[ end trace 0000000000000000 ]---

------------[ cut here ]------------
[    3.977673] WARNING: CPU: 3 PID: 14 at drivers/regulator/core.c:2395 regulator_put+0x78/0x88
[    3.982456] Modules linked in:
[    3.990861] CPU: 3 UID: 0 PID: 14 Comm: kworker/u16:1 Not tainted 6.12.33-rc1 #1
[    3.993736] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
[    3.995446] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    4.001273] Workqueue: async async_run_entry_fn
[    4.001295] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    4.001306] pc : regulator_put+0x78/0x88
[    4.001320] lr : regulator_put+0x2c/0x88
[    4.002187] sdhci_msm 7864900.mmc: Got CD GPIO
[    4.010581] clk: Disabling unused clocks
[    4.014636] sp : ffff800082f0ba50
[    4.014642] x29: ffff800082f0ba50 x28: 0000000000000000 x27: ffff800081b2f208
[    4.014657] x26: ffff800081b2f1c8 x25: 0000000000000001 x24: 00000000aaaaaaaa
[    4.014671] x23: ffff000009900480 x22: ffff000009610000 x21: ffff000009610000
[    4.014685] x20: ffff00000455c0c0 x19: ffff0000096290c0 x18: ffff0000032f9300
[    4.014699] x17: 0000000000000000 x16: 0000000000000001 x15: 0000000000000003
[    4.019627] PM: genpd: Disabling unused power domains
[    4.025831] 
[    4.025834] x14: ffff8000827eecb0 x13: 0000000000000003 x12: 0000000000000003
[    4.025848] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
[    4.030152] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync cx: -1431655766
[    4.033905] 
[    4.033908] x8 : 0000000000000001 x7 : 0720072007200720 x6 : 0720072007200720
[    4.033922] x5 : ffff000003201f00 x4 : 0000000000000000 x3 : 0000000000000000
[    4.033935] x2 : 0000000000000000 x1 : ffff8000801d1cf4 x0 : ffff0000096290c0
[    4.033950] Call trace:
[    4.033954]  regulator_put+0x78/0x88
[    4.038527] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync cx_ao: -1431655766
[    4.039743] sdhci_msm 7864900.mmc: Got CD GPIO
[    4.042237]  regulator_register+0x6e0/0x8a0
[    4.042252]  devm_regulator_register+0x64/0xb8
[    4.045482] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync cx_vfc: -1431655766
[    4.052573]  rpm_reg_probe+0x15c/0x238
[    4.052586]  platform_probe+0x94/0xd8
[    4.059776] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync mx: -1431655766
[    4.066809]  really_probe+0x13c/0x3f0
[    4.066820]  __driver_probe_device+0xa8/0x118
[    4.074000] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync mx_ao: -1431655766
[    4.081046]  driver_probe_device+0x48/0x238
[    4.081056]  __device_attach_driver+0x138/0x1e0
[    4.081066]  bus_for_each_drv+0x104/0x168
[    4.086092] ALSA device list:
[    4.087642]  __device_attach_async_helper+0x88/0x110
[    4.094717]   No soundcards found.
[    4.101796]  async_run_entry_fn+0x40/0x168
[    4.101809]  process_scheduled_works+0x180/0x3d8
[    4.235346]  worker_thread+0x290/0x3a0
[    4.235359]  kthread+0x104/0x198
[    4.235368]  ret_from_fork+0x10/0x20
[    4.235381] ---[ end trace 0000000000000000 ]---

------------[ cut here ]------------
[    3.977340] WARNING: CPU: 0 PID: 45 at drivers/regulator/core.c:2395 regulator_put+0x78/0x88
[    3.982119] Modules linked in:
[    3.990523] CPU: 0 UID: 0 PID: 45 Comm: kworker/u16:2 Not tainted 6.12.33-rc1 #1
[    3.991654] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    3.993116] sdhci_msm 7864900.mmc: Got CD GPIO
[    3.993381] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
[    3.993389] Workqueue: async async_run_entry_fn
[    3.993410] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    3.993420] pc : regulator_put+0x78/0x88
[    3.993433] lr : regulator_put+0x2c/0x88
[    3.993443] sp : ffff80008330ba50
[    3.993447] x29: ffff80008330ba50
[    4.003358] clk: Disabling unused clocks
[    4.007612]  x28: 0000000000000000 x27: ffff800081b2f208
[    4.007624] x26: ffff800081b2f1c8 x25: 0000000000000001 x24: 00000000aaaaaaaa
[    4.007639] x23: ffff000004366e80 x22: ffff0000045c6000 x21: ffff0000045c6000
[    4.007653] x20: ffff000003263400 x19: ffff000003267180 x18: 0000000000000000
[    4.007667] x17: ffff8000816e1ca0 x16: 0000000000000001 x15: 000000000000ba7e
[    4.012582] PM: genpd: Disabling unused power domains
[    4.018723] 
[    4.018726] x14: 0000000000100000 x13: ffff800083308000 x12: ffff80008330c000
[    4.018741] x11: 0000000000000000
[    4.023128] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync cx: -1431655766
[    4.029919]  x10: 0000000000000000 x9 : 0000000000000000
[    4.029930] x8 : 0000000000000001 x7 : 000000000f659af3 x6 : 000000000f659af3
[    4.034206] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync cx_ao: -1431655766
[    4.037992] 
[    4.037995] x5 : ffff800082bcab78 x4 : 0000000000000004 x3 : ffff80008330b630
[    4.038008] x2 : ffff0000044e0000
[    4.041228] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync cx_vfc: -1431655766
[    4.044504]  x1 : ffff8000801d1cf4 x0 : ffff000003267180
[    4.044516] Call trace:
[    4.044520]  regulator_put+0x78/0x88
[    4.048523] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync mx: -1431655766
[    4.053797]  regulator_register+0x6e0/0x8a0
[    4.053810]  devm_regulator_register+0x64/0xb8
[    4.060864] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync mx_ao: -1431655766
[    4.067946]  rpm_reg_probe+0x15c/0x238
[    4.067961]  platform_probe+0x94/0xd8
[    4.075087] ALSA device list:
[    4.082179]  really_probe+0x13c/0x3f0
[    4.082188]  __driver_probe_device+0xa8/0x118
[    4.087224]   No soundcards found.
[    4.088779]  driver_probe_device+0x48/0x238
[    4.088789]  __device_attach_driver+0x138/0x1e0
[    4.217387]  bus_for_each_drv+0x104/0x168
[    4.217404]  __device_attach_async_helper+0x88/0x110
[    4.217414]  async_run_entry_fn+0x40/0x168
[    4.217429]  process_scheduled_works+0x180/0x3d8
[    4.217441]  worker_thread+0x290/0x3a0
[    4.217452]  kthread+0x104/0x198
[    4.217461]  ret_from_fork+0x10/0x20
[    4.217472] ---[ end trace 0000000000000000 ]---

------------[ cut here ]------------
[    3.977355] WARNING: CPU: 2 PID: 12 at drivers/regulator/core.c:2395 regulator_put+0x78/0x88
[    3.982140] Modules linked in:
[    3.983995] sdhci_msm 7864900.mmc: Got CD GPIO
[    3.990534] CPU: 2 UID: 0 PID: 12 Comm: kworker/u16:0 Not tainted 6.12.33-rc1 #1
[    3.990547] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
[    3.990553] Workqueue: async async_run_entry_fn
[    3.990574] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    3.990584] pc : regulator_put+0x78/0x88
[    4.011978] sdhci_msm 7864900.mmc: Got CD GPIO
[    4.012061] lr : regulator_put+0x2c/0x88
[    4.031730] sp : ffff800080083a50
[    4.034935] sdhci_msm 7864900.mmc: Got CD GPIO
[    4.035698] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    4.035757] x29: ffff800080083a50 x28: 0000000000000000 x27: ffff800081b2f208
[    4.046271] clk: Disabling unused clocks
[    4.050173] x26: ffff800081b2f1c8 x25: 0000000000000001 x24: 00000000aaaaaaaa
[    4.050189] x23: ffff000005010480 x22: ffff0000047e3000 x21: ffff0000047e3000
[    4.050203] x20: ffff000004430740 x19: ffff000004435300 x18: 000000000018a021
[    4.057984] PM: genpd: Disabling unused power domains
[    4.061197] x17: 0000000000000000 x16: 0000000000000001 x15: 0000000000000003
[    4.061212] x14: ffff8000827eecb0 x13: 0000000000000003 x12: 0000000000000003
[    4.068294] sdhci_msm 7864900.mmc: Got CD GPIO
[    4.068433] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync cx: -1431655766
[    4.068460] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync cx_ao: -1431655766
[    4.068482] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync cx_vfc: -1431655766
[    4.068504] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync mx: -1431655766
[    4.068526] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync mx_ao: -1431655766
[    4.068543] ALSA device list:
[    4.068556]   No soundcards found.
[    4.075347] 
[    4.075351] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
[    4.075366] x8 : 0000000000000001 x7 : 0720072007200720 x6 : 0720072007200720
[    4.075379] x5 : ffff000003201f00 x4 : 0000000000000000 x3 : 0000000000000000
[    4.169375] x2 : 0000000000000000 x1 : ffff8000801d1cf4 x0 : ffff000004435300
[    4.169391] Call trace:
[    4.169396]  regulator_put+0x78/0x88
[    4.169410]  regulator_register+0x6e0/0x8a0
[    4.169423]  devm_regulator_register+0x64/0xb8
[    4.169434]  rpm_reg_probe+0x15c/0x238
[    4.205136]  platform_probe+0x94/0xd8
[    4.208859]  really_probe+0x13c/0x3f0
[    4.212592]  __driver_probe_device+0xa8/0x118
[    4.216239]  driver_probe_device+0x48/0x238
[    4.220578]  __device_attach_driver+0x138/0x1e0
[    4.224572]  bus_for_each_drv+0x104/0x168
[    4.229083]  __device_attach_async_helper+0x88/0x110
[    4.233253]  async_run_entry_fn+0x40/0x168
[    4.238287]  process_scheduled_works+0x180/0x3d8
[    4.242195]  worker_thread+0x290/0x3a0
[    4.246965]  kthread+0x104/0x198
[    4.250523]  ret_from_fork+0x10/0x20
[    4.253911] ---[ end trace 000000000000�[    4.262194] s4: failed to enable: (____ptrval____)
[    4.262329] ------------[ cut here ]------------
[    4.265887] WARNING: CPU: 2 PID: 12 at drivers/regulator/core.c:2395 regulator_put+0x78/0x88
[    4.270672] Modules linked in:
[    4.279080] CPU: 2 UID: 0 PID: 12 Comm: kworker/u16:0 Tainted: G        W          6.12.33-rc1 #1
[    4.281959] Tainted: [W]=WARN
[    4.290879] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
[    4.293844] Workqueue: async async_run_entry_fn
[    4.300607] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    4.304866] pc : regulator_put+0x78/0x88
[    4.311803] lr : regulator_put+0x2c/0x88
[    4.315969] sp : ffff800080083a50
[    4.319874] x29: ffff800080083a50 x28: 0000000000000000 x27: ffff800081b2f228
[    4.323095] x26: ffff800081b2f1c8 x25: 0000000000000001 x24: 00000000aaaaaaaa
[    4.330214] x23: ffff000005010680 x22: ffff0000047e3000 x21: ffff0000047e3000
[    4.337338] x20: ffff000004430740 x19: ffff0000044353c0 x18: ffff8000816e1ca0
[    4.344449] x17: 0000000000000000 x16: 0000000000000001 x15: 0000000000000003
[    4.351567] x14: ffff8000827eecb0 x13: 0000000000000003 x12: 0000000000000003
[    4.358686] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
[    4.365804] x8 : 0000000000000001 x7 : 0720072007200720 x6 : 0720072007200720
[    4.372922] x5 : ffff000003201f00 x4 : 0000000000000000 x3 : 0000000000000000
[    4.380041] x2 : 0000000000000000 x1 : ffff8000801d1cf4 x0 : ffff0000044353c0
[    4.387160] Call trace:
[    4.394263]  regulator_put+0x78/0x88
[    4.396524]  regulator_register+0x6e0/0x8a0
[    4.400344]  devm_regulator_register+0x64/0xb8
[    4.404253]  rpm_reg_probe+0x15c/0x238
[    4.408764]  platform_probe+0x94/0xd8
[    4.412495]  really_probe+0x13c/0x3f0
[    4.416229]  __driver_probe_device+0xa8/0x118
[    4.419877]  driver_probe_device+0x48/0x238
[    4.424215]  __device_attach_driver+0x138/0x1e0
[    4.428210]  bus_for_each_drv+0x104/0x168
[    4.432723]  __device_attach_async_helper+0x88/0x110
[    4.436891]  async_run_entry_fn+0x40/0x168
[    4.441925]  process_scheduled_works+0x180/0x3d8
[    4.445832]  worker_thread+0x290/0x3a0
[    4.450603]  kthread+0x104/0x198
[    4.454162]  ret_from_fork+0x10/0x20
[    4.457549] ---[ end trace 0000000000000000 ]---